DVD RECORDER
The factory setting is [1].
Change the unit’s remote control code to
match the remote control code of the DVD
recorder.
For about one second press [ENTER] and
the button ([1], [2] or [3]) which is the same
number as the remote control code set by
the DVD recorder.
When using a Panasonic
DVD recorder
Check the remote control
code of the DVD recorder.
Preparations:
Switch on the television
and select input
Switch off
Switch on the recorder
and start play
Skip items during play
Show recorder
menus
Show disc menus Select and enter
menu items
Stop play
Clear the menus or return to
the previous menu
Pause play
To view frame-by-frame
Search through the disc
Start play from a selected item
Watching DVDs
Operating the DVD recorder
Operating the DVD recorder
Select drive
The factory setting is [9].
1. Press [DVD RECORDER].
2. While pressing [ENTER], press and
hold [8] for approximately
2 seconds.
After performing the following
operations, press this button again.
Start slow-motion play
Switch on
If it does not change
To return
In step 2 above, while pressing [ENTER],
press and hold [9] for approximately
2 seconds.
