750218
14
Zoom out
Zoom in
Previous page
1/292
Next page
20
Wet cleaning [ABCDFH]
Epilation head/Shaver head
(Fig. 21)
1. Wet the discs and blades, and then
apply liquid hand soap.
2. Turn the switch on and then foam
is created.
3. Wash the head with water to wash
out hair.
•Do not use hot water.
•
If soap is not completely washed
away, then a white deposit can
accumulate and prevent the discs
and the blades from moving smoothly.
•Rinse the shaver head with the
frame removed.
4. Turn the switch off, wipe the appliance
with a dry cloth and dry it well.
Foot care head
(Fig. 22)
1. Apply liquid hand soap to the
central part of the le.
2. Pour a small amount of water on
the le and turn the switch on.
3. Rinse any debris thoroughly with
water or lukewarm water.
4. After turning the switch off, remove
the frame and rinse inside.
5. Wipe with a dry cloth and dry in a
well‑ventilated location.
Replacing the outer foil and
the inner blade
ES-DEL8A/ES-EL8A
We recommend replacing the outer foil
[F8] every year and the inner blade
[F] every two years. Remove the
outer foil of the shaver head [ F] only
when replacing it.
Replacing the outer foil
(Fig. 23)
1. While pushing the outer foil gently
with the ngers, use a ngernail to
release the plastic panel ( ) on the
blade from the hooks ( ) on the
inside of the frame.
2. The new outer foil should be
slightly bent and pushed in until it
is hooked in the frame.
Replacing the inner blade
(Fig. 24)
1. Remove the inner blade by holding
it at both ends and pulling straight
away from the shaver.
2. Insert the inner blade by holding it
at both ends and press downward.
Replacing the le
ES-DEL8A/ES-EL8A
Thelelifetimeisapproximately1year
(assuming a single use every 2 weeks
with approximately 10 minutes per use).
Werecommendreplacingtheleabout
once a year.
1. Press down with your nger and
release the le.
2. Align the shaped part with the
mark side and press down. (Fig. 25)
PB015615 - EL8A-3A-2A������_(01GB)_11-07-17.indd 20 2017/11/7 11:11:23
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic ESEL8A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic ESEL8A in the language / languages: All languages as an attachment in your email.

The manual is 10,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info