578998
16
Zoom out
Zoom in
Previous page
1/346
Next page
16
Notes
The water and detergent will mix after cleaning begins,
making cleaning liquid.
If “AUTO” mode cannot be selected or the STATUS lamp
glows for 5 seconds when the SELECT button is pressed,
the cleaning liquid needs to be replaced. Replace the
cleaning liquid.
When replaced, the cleaning liquid will last for approximately
30 days if used once per day. (This will differ depending on
beard thickness and the ambient temperature.)
Use the detergent within approximately 6 months after
opening the package. When 6 months have passed,
discard the cleaning liquid, and then pour new water and
detergent into the cleaning liquid unit.
Replace the water and detergent at the same time.
Otherwise the cleaning function may deteriorate.
Only use self‑cleaning recharger detergent for Panasonic shavers.
Cleaning the shaver
Remove any soap or water on the shaver if it has been
washed with hand soap or any other detergent.
1
1
Insert the appliance plug
[CN] into the self-cleaning
recharger [B].
2
2
Pull up the arm until it clicks.
3
3
Remove the protective cap
[A1] and then attach the
shaver.
4
4
Push down the arm until it
clicks.
5
5
Plug in the adaptor [CK] into a household
outlet.
Turn the shaver off before attaching.
Check that the system outer foil is not deformed or
damaged when you are attaching the shaver.
Put shaver into the self‑cleaning recharger with the
trimmer handle retracted. If the trimmer handle is not
retracted, it might scratch the cleaning tray.
6
6
Press the SELECT button [BJ] to select the
mode.
The “Charge” mode starts when attaching the shaver.
Each time you press the SELECT button, the mode
changes from “AUTO”
“Charge”.
The modes start approximately 6 seconds after they are
selected.
The mode will be aborted if the power is cut off. In this
case, perform the mode again from the beginning.
Do not press the cleaning liquid unit removal button as
the cleaning liquid may spill causing a malfunction.
Mode Time required (guide)
Charge
Charge
0 to 60 min
AUTO
Clean/Dry
10 min/350 min
Charge
0 to 60 min
It is not possible to change the mode after
“AUTO” mode has started.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic ES-RT87 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic ES-RT87 in the language / languages: All languages as an attachment in your email.

The manual is 13,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info