Reading the LCD panel when charging
The LCD panel shows the remaining battery capacity from 0%
to 100%, in 10% increments.
While charging After charging is completed
The indicators glow.
Battery capacity and Charge status
will light up and then turn off after 5
seconds.
After charging is completed, turning the power switch ON
with the shaver plugged in will cause Battery capacity and
Charge status to light up and then turn off after 5 seconds.
This shows that the shaver is fully charged.
Recommended ambient temperature for charging is 5‑35 °C.
The battery may not charge properly or at all under extreme
low or high temperatures.
The indicators on the LCD panel blink when there is a
problem with charging.
When charging the shaver for the first time or when it has not
been in use for more than 6 months, the indicators on the
LCD panel may not glow. It will eventually glow if kept
connected.
•
•
•
Shave
Using the shaver
1
1
Rotate the lock ring
[D7] to unlock the
power switch and press
the power switch [D8].
Page 6
2
2
Hold the shaver
as illustrated
above and shave.
We recommend using the shaver in an ambient temperature
range of 5 ‑ 35 °C. If used outside this range, the appliance
may stop operating.
Tips for best shaving results
Start out shaving by applying gentle pressure to your face.
Stretch your skin with your free hand and move the shaver
back and forth in the direction of your beard. You may gently
increase the amount of pressure as your skin becomes
accustomed to this shaver. Applying excessive pressure
does not provide a closer shave.
•
