734741
22
Zoom out
Zoom in
Previous page
1/416
Next page
22
Take care not to damage the skin
protector, the frame, the caps for
legs/arms and for underarms/
bikini‑line during cleaning.
Dry cleaning [ABCDEF]
Epilation head/Shaver head
1� Lift the caps and the frame
upward while holding the cap
release ribs [
ABC2
] or
remove the frame by pushing
the frame release button [
F0
]�
(Fig. 19)
2� Clean the caps [ABC], the
epilation head [D] and the
shaver head [F] with the
cleaning brush [M]. (Fig. 20)
Wet cleaning
[ABCDEFHIJ]
Epilation head/Shaver head
(Fig. 21)
1� Wet the discs and blades, and
then apply liquid hand soap.
2� Turn the switch on and then
foam is created�
3� Wash the head with water to
wash out hair
Do not use hot water.
If soap is not completely washed
away, then a white deposit can
accumulate and prevent the
discs and the blades from
moving smoothly.
Rinse the shaver head with the
frame removed.
4� Turn the switch off, wipe the
appliance with a dry cloth and
dry it well.
Foot care head
(Fig. 22)
1. Apply liquid hand soap to the
central part of the le.
2� Pour a small amount of water on
the le and turn the switch on.
3. Rinse any debris thoroughly
with water or lukewarm water
4� After turning the switch off,
remove the frame and rinse inside�
5. Wipe with a dry cloth and dry in
a well-ventilated location�
Sonic scrub brush and brush head
(Fig. 23)
1� Press the power switch to turn
on the power, and thoroughly
rinse debris from the sonic
scrub brush�
2� Press the power switch to turn
off the power, remove the
brush head, and thoroughly
rinse the underside of the
brush head�
3. Wipe the appliance with a dry
cloth and dry it well.
To protect deformation of the
brush, dry it facing upward, and
then store the brush.
Replacing the outer foil
and the inner blade
We recommend replacing the outer
foil [F5] every year and the inner
blade [F9] every two years.
Remove the outer foil of the shaver
head [F] only when replacing it.
Replacing the outer foil (Fig. 24)
1. While pushing the outer foil gently
with the ngers, use a ngernail
to release the plastic panel (
b
) on
the blade from the hooks (
a
) on
the inside of the frame�
2� The new outer foil should be
slightly bent and pushed in
until it is hooked in the frame�
EL9A-7A v3.indb 22 18/11/7 上午11:37
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic ES-EL9A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic ES-EL9A in the language / languages: All languages as an attachment in your email.

The manual is 9,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info