616139
4
Zoom out
Zoom in
Previous page
1/25
Next page
4
Parts identification
(See fig. 1)
A Protective cap
B Outer blade
C Outer blade frame
D Inner blade
E Joint
F On/off switch
Slide the switch upward to
turn the trimmer on.
G Body
H Battery cover
Replacing battery
(See fig. 2)
Turn the battery cover counter clock-
wise and match the line a with b
and pull to remove. Insert one AA
(R6) battery. To replace the battery
cover, reverse the above procedure.
Using your trimmer
Turn on the switch and carefully in-
sert the tip of the outer blade into your
nostril or an ear hole to trim the nose
and ear hairs.
Maintenance
Be sure that the switch is turned off
before removing, replacing or clean-
ing the blades.
To remove the outer blade frame,
turn it and match the line c with d
and pull upward. (See fig. 3)
Detach the inner blade from the outer
blade. Wipe the blades with a tissue
to remove any cut hairs, dust, etc.
THE WHOLE UNIT CAN BE
WASHED IN WATER.
DO NOT USE BOILED WATER.
Next, put the inner blade back into
the outer blade. To replace the outer
blade frame to the body, match the
mark c with d, and turn clockwise
until it clicks in.
Caution
Do not insert the device further into
your nostril or an ear hole than the
narrow tip on the outer blade. Also,
do not press the trimmer forcefully
into your nostril, or an ear hole.
Do not attempt to use the device if
the outer blade frame or blades are
deformed or damaged, as injury to
your nostril or an ear hole may oc-
cur.
This trimmer is designed only for
cutting nose or ear hairs. Do not at-
tempt to use it for any other purpose.
The blades have been precision
manufactured. Do not subject them
to excessive force, impact, etc.
Be sure that the switch is turned off
before attempting to clean the
blades. If used once a week for
approx. 1 min. at a time, the life of
the blades is approx. 3 years.
Since it may lead to unexpected
problems and accidents, do not at-
tempt to modify or disassemble and
repair the trimmer yourself.
Do not wipe it with thinner, benzine
or alcohol. Clean it by cloth with
soapy water.
READ ALL INSTRUC-
TIONS BEFORE USE.
OS00B036_ER412_E 4/17/00, 1:41 PM4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic ER412 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic ER412 in the language / languages: All languages as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info