569364

Panasonic DMREX96CEG Manual

83
Zoom out
Zoom in
Previous page
1/88
Next page
83
VQT4W64
Reference
[DVB-T] Digital broadcasts cannot be received.
¾ Digital broadcast may not have started in your region yet.
¾ The aerial may not be pointing in the direction of the TV station,
or the direction of the aerial may have changed due to strong
winds or vibration. If problem persists consult your local TV
aerial installer.
¾ Switch “Active Antenna” to “On” in the Setup menu if you are
using an indoor antenna. (> 70)
[DVB-T] After DVB Auto Setup only some or no
DVB channels are found.
¾ Check to ensure your area is covered by DVB transmissions.
¾ Check that the aerial and antenna cable are designed for DVB.
If you live within 5-10 km of DVB transmission towers, a
combined VHF/UHF aerial should be adequate. Outside this
area, separate VHF and UHF aerials provide superior reception
performance. (> 6)
Picture regularly breaks up on some channels.
“No Signal” message is displayed.
¾ Interference (known as impulse noise) from household
appliances such as light switches, fridges etc. may cause
picture break up and/or audio distortion. Use a high quality
quad shielded coaxial cable fly lead between this unit and
antenna wall socket to minimise impulse noise pickup. If
problem persists consult your local TV aerial installer or CATV
provider.
¾ Adjust the aerial reception with “DVB Manual Tuning” in the
Setup menu. (> 65)
¾ Check “Signal Condition”. If “Signal Quality” or “Signal Strength”
are displayed in red or constantly changing, check the aerial or
the connection. If problem persists consult your local TV aerial
installer or CATV provider. (> 65)
¾ Check that the aerial or connecting cable is designed for DVB.
¾ Check the connection.
[DVB-T] Picture very infrequently breaks up on
some or all channels.
¾ Electrical atmospheric interference caused by local or distant
lighting storms or heavy rain with wind in “leafy” locations may
cause pictures to break up and audio to mute or distort
momentarily.
¾ Impulse noise interference from an infrequently used electrical
appliance, or a passing vehicle or lawn mower with a “noisy”
ignition system.
[DVB-C] Even after scanning channels with “Full
Scan” in DVB Auto Setup, some channels are not
found or no channels are found.
¾ Check the connections. (> 6, 73)
¾ You can specify optional symbol rates for scanning channels as
follows:
1 Restart auto channel setting. (> 64, Auto Setup Restart)
2 Press [3, 4] to select “Digital Cable (DVB-C) & Analogue
Channels” or “Digital Cable (DVB-C) Channels” and press
[OK].
3 Press [OPTION] in “DVB Auto Setup” screen.
4 Press [3, 4] to select “---- ksym/s (User Def.)” and enter
the symbol rate with numbered buttons and then press [OK].
5 Press [OK].
Then go to step 5 on page 8 and complete the settings.
Refer to your CATV provider about the symbol rate
information.
VIERA Link doesn’t work.
¾ Check the HDMI cable connection. Check that “HDMI” is
displayed on the front display when the power for the main unit
is set to On.
¾ Make sure that “VIERA Link” is set to “On”. (> 69)
¾ Check the “HDAVI Control” settings on the connected device.
¾ Some functions may not work if depending on the version of
“HDAVI Control” of the connected equipment. This unit supports
“HDAVI Control 5” functions.
¾ If the connection for the equipment connected with HDMI was
changed, or if there was a power failure or the plug was
removed from the household mains socket, “HDAVI Control”
may not work.
In this case, perform the following operations.
1 When the HDMI cable is connected to all equipment with the
power on, turn the TV (VIERA) on again.
2 Change the TV (VIERA) settings for the “HDAVI Control”
function to off, and then set to on again. (For more
information, see the VIERA operating instructions.)
3 Switch the VIERA input to HDMI connection with this unit,
and after this unit’s screen is displayed check that “HDAVI
Control” is working.
The operation on this unit (music playback etc.)
is interrupted.
¾ The operation on this unit may be interrupted when you press
buttons on the TV remote control that do not work for VIERA
Link functions.
To return all the settings other than the main ones
to the factory preset
¾ Select “Yes” in “Shipping Condition” in the Setup menu. All the
settings except for language settings, Slideshow Settings, clock
settings, ratings levels and PINs (“Ratings” in Disc menu and
“Child Lock” in Tuning menu), etc. return to the factory preset.
The timer recording programmes are also cancelled. (> 71)
¾ Select “Yes” in “Default Settings” in the Setup menu. All the
settings except for tuning settings, clock settings, language
settings, disc language settings, remote control code, ratings
levels and PINs (“Ratings” in Disc menu and “Child Lock” in
Tuning menu), etc. return to the factory presets. The timer
recording programmes are also cancelled. (> 71)
¾ Press and hold [X CH] and [CH W] on the main unit until the
Language setting screen appears. All the settings except for
clock settings, remote control code, ratings levels and PINs
(“Ratings” in Disc menu and “Child Lock” in Tuning menu), etc.
return to the factory preset. The timer recording programmes
are also cancelled.
To reset the ratings level settings
¾ While the disc tray is open, press [DRIVE SELECT] to select
the DVD drive, then press and hold [¥ REC] and [1] on the
main unit at the same time for 5 or more seconds.
To restore the unit if it freezes due to one of the
safety devices being activated
¾ Press and hold [Í/I] on the main unit for 3 seconds. (The
settings remain.)
After performing an update, you can no longer
receive broadcasts.
¾ Depending on the content of the update, some settings may
have returned to the preset values. Fix the settings again.
Digital broadcast
VIERA Link
To reset this unit
Other
DMREX96C-VQTXXXX_eng.book 83 ページ ２０１３年３月５日　火曜日　午後５時５１分
… 83 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMREX96CEG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMREX96CEG in the language / languages: English as an attachment in your email.

The manual is 4,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMREX96CEG

Panasonic DMREX96CEG User Manual - German - 88 pages

Panasonic DMREX96CEG User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info