569364

Panasonic DMREX96CEG Manual

78
Zoom out
Zoom in
Previous page
1/88
Next page
78
VQT4W64
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart
do not solve the problem, consult your dealer for instructions.
No power.
The unit does not turn on pressing [Í].
¾ Insert the AC mains lead securely into a known active
household mains socket. (> 6, 73)
¾ Linked timer recordings with external equipment is in recording
standby (“EXT-L” on the unit’s display blinks when [Í] is
pressed). Press [EXT LINK] to cancel the recording standby.
(> 25)
The unit switches to standby mode.
¾ One of the unit’s safety devices is activated. Press [Í/I] on the
main unit to turn the unit on.
The power is turned off automatically.
¾ If you connected this unit to a “HDAVI Control” compatible TV
with an HDMI cable, or connected this unit to a Q Link-
compatible TV with a fully wired 21-pin Scart cable, this unit will
be automatically set to standby mode when the TV is set to
standby mode. (> 39)
This unit turns off when the TV input is switched.
¾ This is a normal phenomenon when using VIERA Link (HDAVI
Control 4 or later). For details please read the operating
instructions for the TV.
The display is dim.
¾ Change “Unit’s Display” in the Setup menu. (> 68)
“0:00” is flashing on the unit’s display.
¾ Set the clock. (> 70)
The time recorded on the disc and the available
time shown do not add up.
The displayed time of this unit is different from
the actual recording time or MP3 recording time.
¾ Times shown may disagree with actual times.
¾ Available recording space on DVD-RW (DVD-Video format) or
+RW increases only when the last recorded title is deleted. It
does not increase if other titles are deleted.
¾ Even if you delete recorded content from the DVD-R, DVD-R
DL, +R or +R DL, there is no increase in disc space.
¾ More disc space than the actual recording time is used after
recording or editing the DVD-R, DVD-R DL, +R or +R DL 200
times or more.
¾ While searching, the elapsed time may not display correctly.
The clock is not correct.
¾ Under adverse reception conditions, etc., the automatic time
correction function may not work. In this case, “Automatic” is
automatically turned to “Off”. If re-setting the Auto Clock Setting
does not work, set the time manually. (> 70)
Compared to the actual recorded time, the
elapsed time displayed is less.
(Only when recording in NTSC)
¾ The displayed recording/play time is converted from the
number of frames at 29.97 frames (equal to 0.999 seconds) to
1 second. There will be a slight difference between the time
displayed and the actual elapsed time (e.g., actual 1 hour
elapsed time may display as approximately 59 minutes
56 seconds). This does not affect the recording.
“U88” is displayed and the disc cannot be
ejected.
¾ The unit is carrying out the recovery process. Do the following
to eject the disc.
1 Press [Í/I] on the main unit to switch the unit to standby.
If the unit doesn’t switch to standby, press and hold [Í/I] on
the main unit for about 3 seconds. The unit is forcibly
switched to standby.
2
While the unit is off, press and hold [
∫
] and [CH
W
]
on the main
unit at the same time for about 5 seconds. Remove the disc.
Television reception worsens or becomes
impossible after connecting the unit.
¾ This can occur because the signals are being divided between
the unit and other equipment. It can be solved by using a signal
booster, available from audio-visual suppliers. If it is not solved
by using a signal booster, consult the dealer.
¾ Broadcast signals may not be output from this unit’s RF OUT
terminal. Select “On” in “RF OUT ( Aerial Signal )” in the Setup
menu. (> 71)
The digital channel information or control panel
does not appear.
Status messages do not appear.
¾ Select the length of time (3–10 sec.) in the “On-Screen
Messages” in the Setup menu. (> 68)
¾ The digital channel information will not appear during playback
or recording.
¾ The control panel is only displayed when connected to a TV
supporting “HDAVI Control 2” or later. (> 40)
¾ Analogue broadcasts do not support the digital channel
information.
Some functions of DVB-C/DVB-T do not work.
¾ The unit does not necessarily support all DVB-C/DVB-T
functions such as MHP (Multimedia Home Platform) etc.
New functions introduced by broadcasters cannot be
guaranteed to work.
The grey background does not appear.
¾ Select “On” in “Grey Background” in the Setup menu. (> 68)
Screen size is wrong.
¾ Check the settings for “TV Aspect” in the Setup menu. (> 69)
¾ If you connect an HDMI cable, set “Aspect for 4:3 Video” to
“16:9” in the Setup menu. (> 69)
The recorded title’s screen size is wrong.
¾ Set “Rec for High Speed Copy” to “On”, and set the “Aspect for
Recording” to “4:3”. (> 67)
¾ 16:9 aspect programmes are recorded in 4:3 aspect in the
following cases.
– [-R] [-R]DL] [-RW‹V›] If you recorded or copied using “EP” or “FR
(recordings 5 hours or longer)” recording mode.
– If you recorded or copied to a +R, +R DL or +RW.
– If you recorded with the “Aspect for Recording” set to “4:3” in
the Setup menu.
When you want to record 16:9 programme in the same
aspect, set “Rec for High Speed Copy” to “On”, and set the
“Aspect for Recording” to “16:9”. (> 67)
¾
By setting “Aspect for Recording” to “Automatic”, there is a chance
that the recording will be made using the wrong aspect. Match the
aspect settings to the broadcast when recording. (
>
67)
It may be possible to adjust the display mode on the TV. Refer to
your television’s operating instructions.
The following do not indicate a problem with this unit:
≥Regular disc rotating sounds.
≥Poor reception due to atmospheric conditions.
≥Image disturbance during search.
≥
Interruptions in reception due to periodic satellite broadcasting breaks.
≥Operations are slow to respond when “Power Save in Standby” is
activated.
≥Operations do not work due to a poor-quality disc. (Try again
using a Panasonic disc.)
≥The unit freezes due to one of its safety devices being activated.
(Press and hold [Í/I] on the main unit for 3 seconds.)
≥When the unit is turned on or off, there may be an unexpected
sound.
Power
Displays
TV screen and video
DMREX96C-VQTXXXX_eng.book 78 ページ ２０１３年３月５日　火曜日　午後５時５１分
… 78 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMREX96CEG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMREX96CEG in the language / languages: English as an attachment in your email.

The manual is 4,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMREX96CEG

Panasonic DMREX96CEG User Manual - German - 88 pages

Panasonic DMREX96CEG User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info