569364
70
Zoom out
Zoom in
Previous page
1/88
Next page
70
VQT4W64
Changing the unit’s settings
§
Can be selected when selecting Digital Terrestrial (DVB-T)
Channels in Auto Setup
(All factory default settings are indicated with underlined text.)
AV2 Settings
Set to match the connected equipment.
Press [OK] to show the following settings.
AV2 Input
Set to “S Video” when receiving or recording S Video output from
external equipment.
[Video
] [S Video]
Ext Link
This setting cannot be made when the “TV System” is set to
“NTSC” (> 69).
[Ext Link 1] When a digital satellite receiver which transmits a
special control signal recordings via the 21-pin
Scart cable is connected.
Start and stop timings of recording are controlled
by the control signal.
[Ext Link 2
] When external equipment with a timer function is
connected.
When it turns on, recording starts.
When it turns off, recording stops.
Active Antenna
§
[On] Select this when you will use indoor antenna that is not
equipped with power supply.
[Off
]
Common Interface
Access to software contained on Common Interface (CI) modules.
(> 6, 10) Follow the on-screen instructions.
Others
Remote Control
Change the remote control code on the main unit and the remote
control (the two must match) if you place other Panasonic products
close together.
[DVD 1
] [DVD 2] [DVD 3]
Use “DVD 1”, the factory set code, under normal circumstances.
1
Press [
3
,
4
] to select the code (“DVD 1”, “DVD 2” or “DVD 3”)
and press [OK].
To change the code on the remote control
2 While pressing [OK], press and hold the numbered button
([1], [2] or [3]) for more than 5 seconds.
3 Press [OK].
When the following indicator appears on the
unit’s display
The unit’s remote control code
Change the code on the remote
control to match the main unit’s
(> step 2).
Executing “Shipping Condition” in the Setup menu returns the main
unit code to “DVD 1”. Change the remote control code to 1
(> step 2).
Setup
Tuning
Remote Control
Press “” and “OK” together
for more than 5 seconds on the remote
control.
Disc
Picture
Note
Clock
This unit usually obtains time and date information from digital
broadcasts and automatically corrects the time several times a
day. However, if the time is not set correctly, use the settings listed
in the method below.
1
Press [
3, 4]
to select “Off” of “Automatic” and press [OK].
2 Press [2, 1] to select the item you want to change.
The items change as follows:
Hour!#Minute!#Second!#Day!#Month!#Year
^-----------------------------------------------------------------------------------------J
3 Press [3, 4] to change the setting.
You can also use the numbered buttons for setting.
4 Press [OK] when you have finished the settings.
The clock starts.
If a TV station transmits a time setting signal, and when
“Automatic” in the Clock setting menu is set to “On”, the automatic
time correction function checks the time and if necessary it is
adjusted several times every day.
Standby Settings
Press [OK] to show the following settings.
Power Save in Standby
[On] It will go into “Power Save in Standby” mode
when the unit is in standby mode.
[Off] It is possible to start quickly from the standby
mode. (Quick Start mode)
[On Timer] “Power Save in Standby” is set to activate
during the setting time period. (> below)
1 Press [3, 4] to select “On Timer” and press [OK].
2 Press [3, 4] to set the start time (hour).
3 Press [2, 1] to select the stop time and press [3, 4] to
set the stop time (hour).
4 Press [OK] when you have finished the settings.
You can also use the numbered buttons for setting.
You can set start and stop time by the hour.
If the clock has not been set, “Power Save in Standby” is
activated at all hours.
Clock
Automatic
Time Date
Please set clock manually.
OK: store RETURN: leave
OK
RETURN
SELECT
CHANGE
Off
0
:
00 :
00
1
. 1
.
2010
0 9
Number
e.g., This screen appears
while receiving a digital
broadcast.
Note
Power Save in Standby
Power Save On Timer
To
6
:00
From
0
:00
Saves standby power consumption
by disabling Quick Start function and
AV2 loop-through in standby. Unit's Display
is set to "Automatic".
Press OK to manually set the period of
Power Save.
0 9
Number
OK
RETURN
SELECT
CHANGE
DMREX96C-VQTXXXX_eng.book 70 ページ 2013年3月5日 火曜日 午後5時51分
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMREX96CEG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMREX96CEG in the language / languages: English as an attachment in your email.

The manual is 4,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMREX96CEG

Panasonic DMREX96CEG User Manual - German - 88 pages

Panasonic DMREX96CEG User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info