569364
65
Zoom out
Zoom in
Previous page
1/88
Next page
65
VQT4W64
Setting menus
Settings for DVB-C Channels/
Settings for DVB-T Channels
Press [OK] to show the following settings.
[DVB-C] DVB Manual Tuning
You can set channels manually that the DVB Auto Setup could not
complete successfully.
1 Press [2, 1] to adjust the frequency.
Adjust the frequency by checking the signal strength and signal
quality displays.
[Refer to “Signal Condition” (> right) for signal quality and
signal strength.]
2 Press [3, 4] to select “Symbol Rate” and enter Symbol Rate for
tuning with the numbered buttons if needed.
Normally set to “Auto”. (Default : “Auto”)
3 Press [3, 4] to select “Bandwidth” and press [2, 1] to select
“7 MHz” or “8 MHz”.
4 Press [OK] to start scan.
The set channel is displayed in the table.
5 Press [EXIT] and press [WXCH] to check that applicable
channels have been selected.
[DVB-T] DVB Manual Tuning
You can set channels manually that the DVB Auto Setup could not
complete successfully.
1 Press [3, 4] to select the channel you want to set.
2 Press [2, 1] to adjust the frequency.
Adjust the frequency by checking the signal strength and signal
quality displays.
[Refer to “Signal Condition” (> right) for signal quality and
signal strength.]
3 Press [OK] to start scan.
The set channel is displayed in the table.
4 Press [EXIT] and press [WXCH] to check that applicable
channels have been selected.
Add New DVB Channels
You can search for newly added digital channels to receive.
[DVB-C] Press [3, 4] to select “Quick Scan” or “Full Scan” and press
[OK].
The unit starts searching for newly available digital channels. This
takes about 20 minutes.
A message is displayed when the search is finished.
“No new DVB channels found.” is displayed when no new channels
can be found.
Press [OK] to save the newly found channels.
New Channel Message
Signal Condition
You can check the Signal Condition.
Press [WXCH] to select the channel.
When “Signal Condition” is displayed in grey and cannot be
selected:
1 Press [EXIT] to exit the screen.
2 Press [WXCH] to select a digital channel. “D” appears on the
unit’s display.
3 Display the Setup menu again (> 64).
Signal Quality
The quality of the signal is shown.
Below 2 (display red):
The signal quality is so poor that there may be interference in the
pictures and sound.
2–5 (display orange):
The signal quality is basically adequate, but brief interference in the
pictures and sound is possible in isolated case.
Over 5 (display green):
Optimum picture and sound quality.
Signal Strength
The strength of the signal is shown.
The display for signal strength is grey. “0” means signal strength 0%,
“10” means signal strength 100%.
If the signal is too strong, the display will change from grey to red.
Reduce the signal amplification at your aerial.
When the signal is weak:
adjust the aerial reception with “DVB Manual Tuning” in the
Setup menu (> left).
check that the current digital broadcast channel is correctly
broadcasting.
[DVB-C] Network Name
The network name which is stored in the transport stream list for the
current DVB service is displayed.
If there is no network name in it, “Unknown” is displayed.
[DVB-C] Parameter
The frequency and the symbol rate are displayed.
[DVB-C] DVB Advanced Setup
You can set up channels by entering “Home Frequency” and
“Network ID” obtained from your cable provider.
Digital timer recording programmes are cancelled and digital
tuning data are replaced by new ones.
1 Press [2, 1] to select “Yes”.
2 Press [3, 4] to select “Home Frequency” and press [2, 1] to
select the predefined value.
You can also enter the frequency with numbered buttons.
3 Press [3, 4] to select “Network ID” and enter Network ID with
numbered buttons.
4 Press [OPTION] to add “Symbol Rate”, if needed.
If you do not need to add “Symbol Rate”, go to step 6.
5 Press [3, 4] to select “---- ksym/s (User Def.)” and enter the
symbol rate with numbered buttons and then press [OK].
6 Press [OK].
Advanced Setup starts.
If there is no signal quality and/
or signal strength, press the
“Red” button and select the
correct channel system.
[DVB-C] [DVB-T]
DVB Manual Tuning
NewChannel Name Type
RETURN
010
Bandwidth
Symbol Rate
Auto
8
Signal Quality
010
Signal Strength
Frequency
START
SCAN
Number
SELECT
Free TV : 0 Pay TV : 0 Radio : 0
No.
Frequency
MHz
MHz
338,00
0 9
DVB Manual Tuning
Frequency
MHz
NewChannel Name Type
RETURN
010
010
[CH24]
498,0
Signal Quality
Signal Strength
Channel System
Western Europe (CCIR)
Change Channel System
OFFSET
START SCAN
CH
TV : 0 Radio : 0 Data : 0
No.
Add New DVB Channels
Progress 0%
100%
No. QualityChannel Name Type
Add New DVB Channels
Scan CH 5 69
CH QualityChannel Name Type
A new DVB Channel has been found.
Start DVB Auto Setup ?
Selecting DVB Auto Setup will delete
all Timer Programmes.
New Channel
NoYes
[Automatic] When a new DVB channel is added, New Channel
Message appears automatically.
If you select “Yes” on the display, Auto-Setup starts
(all channel settings are deleted. The timer
recording programmes are also cancelled.).
[Off] New Channel Message does not appear.
[DVB-C] [DVB-T]
Signal Quality 010
Signal Strength 010
DVB Channel
DVB Signal Condition
RETURN
Channel
+
Channel
Network Name
Parameter
1 Das Erste
Kabel Deutschland
113 MHz, 6900kS/s
Signal Quality 010
Signal Strength 010
DVB Channel
DVB Signal Condition
RETURN
Channel
+
Channel
[CH14] 5 BR3
Signal Quality 010
Signal Strength 010
DVB Channel
DVB Signal Condition
RETURN
Channel
+
Channel
[CH14] 5 BR3
DVB Advanced Setup
010
Network ID
0
Signal Quality
010
Signal Strength
Home Frequency
MHz
338,00
DMREX96C-VQTXXXX_eng.book 65 ページ 2013年3月5日 火曜日 午後5時51分
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMREX96CEG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMREX96CEG in the language / languages: English as an attachment in your email.

The manual is 4,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMREX96CEG

Panasonic DMREX96CEG User Manual - German - 88 pages

Panasonic DMREX96CEG User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info