569364
6
Zoom out
Zoom in
Previous page
1/88
Next page
6
VQT4W64
STEP 1
Insert the CAM (Conditional Access Module) and Smart Card
You need a Conditional Access Module together with a valid Smart Card and a subscription with the corresponding CATV provider if you want to
watch/record encrypted digital CATV broadcasts.
1 Insert the certified Smart Card into the commercially available CAM (Conditional Access Module).
2 Insert the CAM into the CI (Common Interface) slot of this unit.
TV service encryption is automatically cancelled and the service can be viewed or recorded.
§
When using unencrypted digital terrestrial broadcasts or analogue broadcasts, you do not need to insert CAM. Proceed to STEP 2. (> below)
§
The recording might be prohibited by broadcasters.
Before connection, turn off all equipment and read the appropriate operating instructions.
Refer to “Additional connections” (> 73, 74) for connection using other terminals and connection with other equipment.
Be sure to insert the CAM horizontally into the slot.
Insert the CAM with the correct direction.
For more details, see the manual of the CAM and Smart
Card, or consult the dealer.
The Common Interface supports the modules according to
DVB Specification and CI Plus Specification.
Unplug the AC mains lead before you insert or remove the
CAM with Smart Card. Remove it slowly.
OUT
OUT
DIGITAL AUDIO OUT
DIGITAL AUDIO OUT
(
PC
PC
M/
M/
BITSTREAM
BITSTREAM
)
RF
IN
RF
OUT
VIDEO
AUDIO
R
L
AV1
(
TV
)
OPTICAL
AV2
(
EXT
)
AC IN
COMMON INTERFACE
COMMON INTERFACE
COMMON INTERFACE
AC IN
AC IN
CI (Common Interface)
slot
2
1
CAM (Conditional Access Module)
Smart Card
This unit’s rear panel
Note
STEP 2 Connection
Using a 21-pin Scart cable
You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (> 39).
You can enjoy high-quality viewing by connecting the unit to an RGB compatible television (> 86).
“AV1 Output” in the Setup menu (> 69)
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when it is turned off.
[approx. 0.3 W (“Power Save in Standby” is activated and “RF OUT ( Aerial Signal )” is set to “Off”.)]
Connecting a television
Required setting
OPTICAL
OUT
OUT
RF
IN
RF
OUT
VIDEO
AUDIO
R
L
AV1
(
TV
)
AV2
(
EXT
)
AC IN
COMMON INTERFACE
COMMON INTERFACE
COMMON INTERFACE
VHF/UHF
RF IN
AV
4
3
2
1
2
AV
To the terrestrial aerial
Television’s rear panel
Aerial cable/
CATV coaxial
cable
This unit’s rear panel
To household mains socket
(AC 220 to 240 V, 50 Hz)
Fully wired 21-pin
Scart cable
AC mains lead
(supplied)
Connect only after all other connections are
complete.
“AV2 Input” setting in the Setup menu
(> 70)
Required setting
21-pin Scart
cable
Cooling fan
Connecting a terminal other than the
21-pin Scart terminal (> 7, 74)
RF coaxial cable
(supplied)
Connect the unit directly to the
television
If you connect the unit through an AV
selector or video cassette recorder to
the television, video signal will be
affected by copyright protection systems
and the picture may not be shown
correctly.
When connecting to a television
with a built-in VCR
Connect to the input terminals on the television side if
there are both television and VCR input terminals.
Television
VCR
This unit
DO NOT
Common Interface (CI) slot
In order to view or record encrypted CATV services,
you must insert a certified CAM and Smart Card
into this slot. (> above)
Cable
Digital satellite
receivers rear panel
For viewing digital satellite broadcasts,
connect this unit with a digital satellite
receiver before connecting the AC
mains lead.
DMREX96C-VQTXXXX_eng.book 6 ページ 2013年3月5日 火曜日 午後5時51分
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMREX96CEG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMREX96CEG in the language / languages: English as an attachment in your email.

The manual is 4,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMREX96CEG

Panasonic DMREX96CEG User Manual - German - 88 pages

Panasonic DMREX96CEG User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info