623120
67
Zoom out
Zoom in
Previous page
1/76
Next page
Reference
67
RQT6570
Error messages
On the television Page
On the unit’s display
No disc. You haven’t inserted a disc. Correctly insert a disc that this unit can use.
The disc is upside down. If it is a single-sided disc, insert it so the label is facing up.
8
18
This is non-recordable disc. The unit cannot record on the disc you inserted. The unit cannot record onto finalized DVD-R,
DVD-Video, CDs, or video CDs. Insert a DVD-RAM or unfinalized DVD-R.
You inserted an unformatted DVD-RAM. Format the disc with this unit.
8
38
This disc is not formatted
properly.
Please format the disc in
‘DISC SETTING’ to record.
This disc cannot be read. You inserted an incompatible disc. Insert a compatible disc. 8
Please check write protect
tab on the disc.
The write-protect tab on the cartridge is set to PROTECT.
Use a ballpoint pen or similar to release the write protection.
Contents of this disc are
protected.
The program is write-protected. Cancel the protection with the Direct Navigator.
The disc is write-protected. Cancel Disc Protection with DISC SETTING.
40
38
Cannot finish recording
completely.
The program was copy-guarded.
No space left on HDD, DVD-RAM or DVD-R.
The connection from the external device (DV equipment etc.) was lost during recording.
Recording was not completed for some other reason.
Cannot record. The disc is scratched. Use another disc.
The disc is dirty.
You inserted an incompatible disc. Insert a compatible disc.
10
8
HDD is full.
Disc is full.
No space left on HDD, DVD-RAM or DVD-R.
Create space by erasing any unwanted programs. [HDD] [RAM]
Use a new disc. [RAM] [DVD-R]
Erase any unwanted files (still pictures).
You may record up to 300 folders and 3000 files (still pictures) using this unit.
38, 40
48
Cannot dub from this disc. Dubbing prohibited disc in tray.Dubbing to the HDD is not possible.
Please set clock. The clock is not set. Set the clock. 64
This disc may not be played
in your region.
You tried to play a disc with a region number different from this unit’s region number. This unit can
only play discs with the region numbers compatible with this unit (1, All, or including the number 1).
Cover
page
Your selection exceeds the
recorder’s rating limit.
A ratings level has been set for DVD-Video with this unit.
Unlock the unit with “Ratings” in “Disc” in the SETUP menu.
62
Cannot play back on this unit.
You tried to playback incompatible pictures (TIFF images and MOTION JPEG cannot be played back). 9
No PC CARD
No valid PC card
The PC card is not inserted. If this message is displayed with a compatible PC card already
inserted, turn off the power, remove and then re-insert the card.
The PC card format does not match.
The PC card inserted is not compatible.
25
9
9
No DVD-RAM disc DVD-RAM is not loaded.
DVD-RAM is not formatted.
(Even if this message is displayed, it may sometimes be possible to playback moving picture parts.)
38
Please check write protect
tab.
Release the protection on the PC card.
Release the protection on the DVD-RAM.
9
8, 38
No folder There is no compatible folder in this unit. 9
Cannot write. The PC card is currently protected Release the write protection.
There is no space remaining. Erase any unwanted files (still pictures).
9
48
Finalizing is necessary for
compatible playback.
To enable playback of your DVD-R on compatible equipment, it is necessary to finalize it.
38
U11
NO DISC
The disc is dirty or badly scratched.
Clean the disc if it is dirty.
The disc cannot be played if it is scratched and this display doesn’t disappear.
You have inserted a disc the unit cannot play or record on.
Insert a disc the unit can play or record on.
Cleaning has been carried out using DVD-RAM/PD lens cleaner.
Cleaning is finished. Press [< OPEN/CLOSE] and remove the disc cleaner from the disc tray.
10
8
U14 The unit is hot.
The unit switches to standby automatically for safety reasons and you cannot operate it. Wait for
about 30 minutes for the service number to disappear.
Select a position with good ventilation when installing the unit.
Do not block the cooling fan on the rear of the unit.
U99 The unit fails to operate properly.
Press [Í, DVD POWER] to switch the unit to standby. Now press [Í, DVD POWER] again to turn
the unit on.
CHK REMOTE
The remote control and main unit are using different codes.
Change the code on the remote control or main unit. 65
RECOVER
If there is a power failure or the AC plug was disconnected while the power was on.
The unit is carrying out its recovery process. Wait until the message disappears.
PROTECT
!?
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-HS2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-HS2 in the language / languages: English as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMR-HS2

Panasonic DMR-HS2 User Manual - German - 94 pages

Panasonic DMR-HS2 User Manual - Dutch - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info