Manual Panasonic DMR-HS2 (page 23 of 76) (English)

623120

Zoom out

Zoom in

1/76

Playing back

RQT6570

[HDD] [RAM] [DVD-R] [DVD-V] [CD] [VCD]

1 Press [Í, DVD POWER] to turn the

unit on.

2 Press [HDD] or [DVD] to select the

playback drive

(➜ Drive, page 66).

The HDD or DVD button lights up on the unit.

≥It is not possible to playback both HDD (Hard Disk Drive)

and DVD drive simultaneously.

3 If you selected the DVD drive

Press [<, OPEN/CLOSE] to open the

tray and insert a disc (➜page 18).

≥Press the button again to close the tray.

≥Insert label-up. (Load double-sided discs so the label for the

side you want to play is facing up.)

≥It is not possible to play continuously from one side of a

double-sided disc to the other. You will need to eject the disc

and turn it over.

≥When using 8 cm (3

) DVD-RAM, remove the disc from the

cartridge and insert it, making sure you align it with the

groove.

≥If you put a disc in while the HDD is selected, the DVD but-

ton on the unit will flash while the unit reads the disc.

≥If Cartridge Protection is activated (➜page 8), pressing [<,

OPEN/CLOSE] will cause playback to begin automatically.

4 Press [1] (PLAY).

The unit takes some time to read the disc

before play starts.

≥If the resume function (➜ right) is not

active, playback will begin from the most

recently recorded program.

≥If you want to play the beginning of the disc (e.g., the first

program, chapter or title), select “PLAY FROM TOP” in the

FUNCTIONS window (➜page 53).

To stop play

Press [∫] (When “PLAY” flashes ➜ Resume Function, right).

≥The screen saver on the right may

appear when you stop play. Press [∫]

again and you can use this unit’s tuner to

watch television.

To pause play

Press [;].

Press again to restart play.

[Note]

≥If you select another drive while playback is in progress, playback

will be stopped. If using DVD-Video, the contents of the menu

screen may be returned to their initial state.

≥If a disc is loaded and DVD drive is selected, the unit will come on

and play will start when you press [1] (PLAY).

≥When you play a disc with an audio-only track, the video from the

previous disc may continue to be shown on the television.

≥Actual sound levels for DVD-Video are lower compared to televi-

sion broadcast or playback of other discs. To avoid a sudden

increase in volume level when switching from DVD-Video, reduce

the volume setting before playing other sources or switching to

television broadcast.

[DVD-V] [VCD]

[VCD]

Switch [DVD, TV] to “DVD” and

Press the numbered buttons (0, 1j9) to select an item.

e.g., “5”: [0] ➜ [5]

“15”: [1] ➜ [5]

[DVD-V]

Press [3, 4, 2, 1] to select an item and press

[ENTER].

≥You may also be able to use the numbered buttons (0, 1j9) to

select an item.

Other buttons used to operate menus

Read the disc’s instructions for further details about operation.

[9] [E]: Shows the next menu.

[:] [D]: Shows the previous menu.

[RETURN]: Shows the menu screen. [VCD]

[TOP MENU]: Shows the first menu screen. [DVD-V]

[MENU]: Shows the menu screen. [DVD-V]

[Note]

≥Discs continue to rotate while menus are displayed. Press [∫]

when you have finished viewing to preserve the unit’s motor and

your television screen.

≥If “/” appears on the television, the operation is prohibited by

the unit or disc.

≥Functions available vary from disc to disc.

[HDD] [RAM] [DVD-R] [DVD-V] [CD] [VCD]

(When the elapsed play time is displayed)

1 During play

Press [∫].

The unit memorizes the position.

2 While “PLAY” is flashing on the display

Press [1] (PLAY).

Play starts from where you stopped it.

To cancel the resume function

Press [∫] until “PLAY” goes out.

(The position is also cleared when you turn the unit off. When the

DVD drive is selected, the position is cleared if you open the disc

tray.)

To start play from a memorized position after turning

the unit off

Press [POSITION MEMORY] during play.

(The message “Position Memorized” appears on the television.)

Now when you press [1] (PLAY) after switching the unit to standby

and back on, play starts from the memorized position and the posi-

tion is cleared.

For your reference

If you press [∫] before switching the unit to standby after pressing

[POSITION MEMORY] to memorize a position, play will resume

from the position you pressed [∫] when you press [1] (PLAY).

[DVD-R] [DVD-V] [CD] [VCD]

≥The position is memorized when you press [POSITION MEMORY]

and cleared when you open the disc tray.

[RAM]

≥Positions recorded by pressing [POSITION MEMORY] remain

memorized even after the disc tray is opened.

≥You cannot mark positions if the disc is write-protected.

Subsequent to Resume Function (➜ right), reference is

made to steps 1-3 only where necessary.

When a menu screen appears on the

television

Starting play from where you stopped it

—Resume Function

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-HS2 in the language / languages: English as an attachment in your email.

The manual is 3,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMR-HS2

Panasonic DMR-HS2 User Manual - German - 94 pages

Panasonic DMR-HS2 User Manual - Dutch - 94 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic DMR-HS2 Manual

Product: