502346
77
Zoom out
Zoom in
Previous page
1/88
Next page
77
RQT9167
Reference
Cannot operate the TV with unit’s
remote control.
Change the manufacturer code on the remote control.
67
It may be necessary to set the code on the remote control again after
changing the batteries.
75
The remote control doesn’t work.
The remote control code is wrong. Change to the correct code.
75
The batteries are depleted. Replace them with new ones.
7
Point the remote control at the remote control sensor on the main unit.
7
Remove obstacles between the remote control and the main unit.
Remove dust from the transmission window and the unit’s sensor.
Coloured glass may obstruct the signal reception/transmission.
Don’t place the signal sensor in direct sunlight or in areas that may be
subject to sun exposure.
It may be necessary to set the manufacturer code again after changing the
batteries.
67
The Child Lock function is activated.
67
The unit is on but cannot be
operated.
Recording drive or playback drive has not been selected properly.
19, 20
Some operations may be prohibited by the disc.
The unit is warm (“U59” appears on the unit’s display). Wait until “U59”
disappears.
73
One of the unit’s safety devices may have been activated.
Reset the unit as follows:
Press [/I] on the main unit to switch to standby mode.
If the unit doesn’t switch to standby mode, reset the unit (¼ 75, “To restore
the unit if it freezes”).
The unit cannot be operated while performing an update. “SW-DL appears on
the unit’s display while it is updating. Please wait until the “SW-DL disappears.
66
“U88” is displayed and the disc
cannot be ejected.
The unit is carrying out the recovery process. The disc may be defective.
Do the following to eject the disc. Try another disc.
(1) Press [/I] on the main unit to switch to standby mode.
If the unit doesn’t switch to standby mode, reset the unit (¼ 75, “To
restore the unit if it freezes”).
(2) While the unit is turned off, press and hold [] and [CH ] on the main
unit at the same time for about 5 seconds. (Ejection may take extra
time depending on discs.)
Cannot eject a disc.
The unit is recording.
The unit may have a problem. Eject the disc as in (2) above.
Linked timer recordings with external equipment is in recording standby
(“EXT-L on the unit’s display blinks when [DVD] is pressed.) Press [EXT
LINK] to cancel the recording standby.
If the Child Lock function is activated, above operation does not work.
Cancel the Child Lock function.
27, 67
Startup is slow.
Startup takes time in the following situations:
A disc other than a DVD-RAM is inserted.
The clock is not set.
Immediately after a power failure or the AC mains lead is connected.
When the unit is connected with an HDMI cable.
When “Power Save” is set to “Off”, startup becomes faster than when
“Power Save” is “On”.
66
General Issues Operation
Page
General Issues GUIDE Plus+
The GUIDE Plus+ system does not
receive any data.
Check whether the clock is properly set.
If signal quality is bad (ghost images or limited reception), the GUIDE
Plus+ system may not be able to receive any data.
14
“No Data” is displayed for some or
all stations.
Some stations are not supported by the GUIDE Plus+ system.
Programme the Timer recording manually.
28
The GUIDE Plus+ information is
not displayed properly.
There was a programme change or GUIDE Plus+ information from a
broadcast station was possibly not correctly transmitted.
Check the current programme, e.g. on the Web site for the GUIDE Plus+
system provider or station provider.
(Continued on the next page)
Page
DMR-EX768EB.indb 77DMR-EX768EB.indb 77 2008/03/06 10:03:252008/03/06 10:03:25
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-EX768EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-EX768EB in the language / languages: English as an attachment in your email.

The manual is 17,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info