502346

Panasonic DMR-EX768EB Manual

65
Zoom out
Zoom in
Previous page
1/88
Next page
65
RQT9167
TV System
Change this setting if you connect an NTSC television or to
record NTSC video from another source.
1. Press [, ] to select the TV System, then
press [OK].
[PAL]
– Select when connecting to a PAL or Multi-system
television. Programmes recorded using NTSC are
played as PAL 60.
– Select to record television programmes and PAL
input from other equipment.
– [HDD] Select when playing a PAL input title recorded
on the HDD.
[NTSC]
– Select when connecting to an NTSC television.
Television programmes cannot be recorded properly.
– Select to record NTSC input from other equipment.
– [HDD] Select when playing an NTSC input title
recorded on the HDD.
The confi rmation screen appears.
2. Press [] to select “Yes”, then press [OK].
Tips
To change the setting all at once (PALNTSC)
While stopped, press and hold [] and
[ OPEN/CLOSE] on the main unit simultaneously for
about 5 seconds.
HDMI Settings
1
Press [OK] to show the following settings.
HDMI Video Format
2
You can only select items compatible with the connected
equipment. If you are concerned about output picture quality, it
may be improved by changing the setting.
– To enjoy High Quality Video up-converted to 1080p, you need
to connect the unit directly to 1080p compatible HDTV. If this
unit is connected to an HDTV through other equipment, it
must also be 1080p compatible.
[576i/480i] [576p/480p] [720p] [1080i]
[1080p] When setting video output to “1080p”, we
recommend using High Speed HDMI Cables that
have the HDMI logo (as shown on the cover).
[Automatic] Automatically selects the output resolution best
suited to the connected television (1080p, 1080i,
720p, 576p/480p or 576i/480i).
Aspect for 4:3 Video
To play a 4:3 title when connected with an HDMI cable, set
how to show pictures on a 16:9 widescreen television. 4:3
picture from HDMI output will be slightly smaller than that
from the other outputs, e.g. Scart and component, this is not a
malfunction of the unit.
[4:3] Picture output expands left or right.
[16:9] Picture is output as original aspect with side panels.
Digital Audio Output
[HDMI and Optical]
[Optical Only] Select when this unit is connected to an
amplifi er with an optical digital audio cable
(¼ 70) and connected to a TV with an
HDMI cable (¼ 70) and you want to enjoy
the highest quality of audio from discs.
VIERA Link
[On]
[Off] Select when you do not want to use “HDAVI Control”.
AV2 Settings
Set to match the connected equipment.
Press [OK] to show the following settings.
AV2 Input
Set to “RGB/Video” or “RGB” when receiving or recording
RGB output from external equipment.
[RGB/Video] The unit automatically detects whether the input
signal from the AV2 terminal is an RGB signal or
other signals and makes settings.
[RGB]
[Video]
[S Video]
Ext Link
This setting cannot be made when the “TV System” is set to
“NTSC” (¼ left)
[Ext Link 1] When this unit is connected to a satellite
receiver with a 21-pin Scart cable and this unit
receives a control signal.
Start and stop timings of recording are
controlled by the control signal.
[Ext Link 2] When external equipment with a timer function
is connected.
Recording is continued while the image signal
is being sent to the unit from the external
equipment.
Recording is stopped when the image signal is
halted by turning the external equipment off.
1
Depending on the connected equipment, some items may be
shaded in grey on the display and cannot be selected, or you
may not be able to change the settings.
2
Choose the setting to suit your TV and preference.
AV1 Output
Set according to the terminal of the connected TV.
Select “Video (with component)” or “S Video (with component)”
for component output (progressive output).
[Video (with component)]
Select when a TV is connected that can receive a composite
signal.
[S Video (with component)]
Select when a TV is connected that can receive an S Video
signal.
[RGB 1 (without component)]
Select when a TV is connected that can receive an RGB signal.
If you always would like to view the picture from the unit in RGB
signal, select this mode. The TV screen will automatically switch
to display the picture from the unit when the unit is turned on.
[RGB 2 (without component)]
Select when a TV is connected that can receive an RGB signal.
If you would like to switch to display the picture from the unit
only when playback or viewing menus, select this mode.
If this unit is connected with an HDMI cable, you cannot select
“RGB 1 (without component)” or “RGB 2 (without component)”.
Setting Menus
DMR-EX768EB.indb 65DMR-EX768EB.indb 65 2008/03/06 10:03:162008/03/06 10:03:16
… 65 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-EX768EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-EX768EB in the language / languages: English as an attachment in your email.

The manual is 17,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info