502346

Panasonic DMR-EX768EB Manual

27
Zoom out
Zoom in
Previous page
1/88
Next page
27
RQT9167
Advanced Features
Recording from a Satellite Receiver
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
Manual Recording
Preparation:
]RAM\ If the disc is protected, release protection
(¼ 58).
Connect a satellite receiver to this unit’s input
terminals (¼ 11).
When the output signal from the external equipment
is NTSC, change the “TV System” to “NTSC” in the
Setup menu (¼ 65).
With the unit stopped
SELECT
INPUT
to select “AV2” for the
satellite receiver you have
connected.
Select the channel on the satellite
receiver.
REC MODE
to select the recording
mode.
Tips
To skip unwanted parts
Press [PAUSE] to pause recording. (Press again to restart
recording.)
To stop recording
Press [STOP].
Linked timer recordings with external
equipment (SKY Digital STB/satellite
receiver) — EXT LINK
Preparation:
]RAM\ If the disc is protected, release protection (¼ 58).
Make sure you connect the AV2 terminal of this unit
to “VCR Scart Terminal” of a SKY Digital STB/
satellite receiver with a 21-pin scart cable (¼ 11).
Set the “AV2 Input” and “Ext Link” to match the
connected equipment in the Setup menu (¼ 65).
Make timer programming on SKY
Digital STB/satellite receiver.
−
Refer to the equipment’s operating instructions.
DRIVE
SELECT
to select the HDD or DVD
drive.
−
If you selected the DVD drive, insert a disc (¼ 17).
Tips
To cancel the external control
Press [EXT LINK] to stop recording or to cancel linked timer
recording standby (The unit turns on and ‘‘EXT-L” disappears.).
Manual timer recordings (¼ 28)
Notes
In order to prevent accidental operation, press [EXT LINK] to
cancel the setting after recording is fi nished.
This function does not work when “TV System” is set to “NTSC” in
the setup menu (¼ 65).
This function does not work with some equipment. Refer to the
equipment’s operating instructions.
The beginnings of recordings may not be recorded correctly in
some cases.
When “Ext Link” is set to “Ext Link 2”, this function does not work
if the input signal is NTSC system.
Programmes are recorded as one title on this unit when the end
time of the earlier timer recording and the start time of the later
timer recording are close to each other.
[HDD] [RAM] To divide the titles, go to “Divide Title” (¼ 46).
While the unit is in EXT LINK standby mode or recording, video
picture is from the AV2 terminal irrespective of “AV1 Output”
setting (¼ 65).
REC
to start recording.
To record programmes from a SKY Digital STB/satellite
receiver using timer programming
EXT LINK
− The unit turns off and “EXT-L” lights on the
unit’s display to indicate timer recording
standby has been activated.
− While the unit is in EXT LINK standby mode
or recording, most operations on this unit are
prohibited ([ OPEN/CLOSE], [/l] etc.).
When you operate, press [EXT LINK] to
cancel EXT LINK standby mode or recording
(The unit turns on and “EXT-L” disappears.).
DRIVE
SELECT
to select the HDD or DVD
drive.
− If you selected the DVD drive, insert a disc
(¼ 17).
This unit cannot record NTSC signals to discs that
already have PAL signal recordings. (However, both
types of programmes can be recorded onto the HDD.)
DMR-EX768EB.indb 27DMR-EX768EB.indb 27 2008/03/06 10:02:382008/03/06 10:02:38
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-EX768EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-EX768EB in the language / languages: English as an attachment in your email.

The manual is 17,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info