502346

Panasonic DMR-EX768EB Manual

13
Zoom out
Zoom in
Previous page
1/88
Next page
13
RQT9167
Power Save
On: Minimise standby power
consumption, without
Quick Start function and
AV2 loop-through in standby.
Off: With Quick Start
function and AV2 loop-through
in standby.
OK
RETURN
SELECT
On
Off
Power Save Function:
, to select “On” or “Off”
then
OK
– Set to “On” to reduce power
consumption in standby mode.
– Refer to the following chart for the Power Save function
features when the unit is turned off.
*e.g., GUIDE Plus+ list is displayed within 1 second after [GUIDE] is pressed
while the unit is off.
Power Save On Off
Power consumption Approx. 2 W Approx. 13 W
Watching the picture from the
satellite receiver connected
to the AV2 terminal
Cannot do Can do
Startup time Not quick Quick*
Front display Turns off Stays lighted
¦
DVD
to turn the unit on.
DVB Auto-Setup starts. The unit
will search for the digital terrestrial
channels. This takes about
5 minutes.
When setup has completed, the confi rmation screen appears.
OK
The Owner ID settings screen appears.
and press the numbered buttons to enter
your choice of a 4-digit PIN number.
Owner ID
RETURN : leave
PIN number
____
Name
House No.
Postcode
RETURN
Make a note of the PIN number
(don’t forget), as it is not possible
to return to the factory preset.
OK
to store the PIN number.
(continued on the next page)
Preparation:
Turn on the mains for the television
(and connected equipment) and
select the appropriate AV input to
suit the connections to this unit.
These are the first settings you make
upon buying the unit. You don’t need
to make these settings again.
S
TA
TU
AA
S
CRE
A
T
AA
E
CHAPTER
F
U
N
C
T
I
O
N
M
E
N
U
D
I
R
E
C
T
N
A
V
A
I
G
A
T
A
A
O
R
G
U
I
D
E
RETURN
PL
A
Y/x1.
A
A
3
P
A
P
P
US
E
S
T
O
P
SL
O
W/SEARC
H
SKIP
CH
P
A
P
P
G
E
SELECT
INPUT
0
9
8
7
6
54
3
2
1
CH
A
V
A
A
¦
TV
DRIVE
SELECT
¦
DVD
V
O
L
DELETE
MANUAL SKIP
P
R
OG/CHEC
K
EXIT
OK
OPTION
11
10
Tips
To cancel Auto-Setup
Press [RETURN].
If the unit displays “No stations found !”
Press [] to select “No” and press [OK]. Go
to step . After you have performed steps
-, turn off the unit and confi rm the
cable or aerial input is connected to the RF
IN terminal. Restart the Auto-Setup again
(¼ 61).
If the clock setting menu appears or the
clock is not correct, set the clock manually
(¼ 14).
Restarting the Auto-Setup (¼ 61)
To correct the PIN number
1. Press [, ] to select the digit.
2. Press the numbered buttons to enter the
digit.
When this unit is not operated for
approximately 5 minutes while the screen
is being displayed, the screen saver may
be displayed.
You can turn this function off (¼ 64,
“Screen Saver”).
TV’s remote control
DVB Auto-Setup
Please wait! Ch 21 68
Prog. QualityChannel
Service Name
Net ID TS ID
RETURN
RETURN: to cancel
BBC ONE
BBC
23
23
1
2
12302
12289
12302
12289
9
9
Setting the Channels and Clock
Quick Start Guide STEP 3
DMR-EX768EB.indb 13DMR-EX768EB.indb 13 2008/03/06 10:02:242008/03/06 10:02:24
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-EX768EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-EX768EB in the language / languages: English as an attachment in your email.

The manual is 17,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info