457633
75
Zoom out
Zoom in
Previous page
1/88
Next page
75
RQT9287
Reference
The following messages or service numbers appear on the unit’s display when something unusual is detected during startup and use.
§
The message are alternately displayed.
On the unit’s display
DVD
(“” stands for a number.)
The remote control and main unit are using different codes. Change the code on the remote control.
Press and hold [OK] and the indicated number button at the same time for more than 5
seconds. (> 67)
GUIDE GUIDE Plus+ data is being downloaded. (> 12)
HARD ERR
§
If there is no change after turning the unit on and off, consult the dealer where the unit was purchased.
NoERAS You cannot delete items on this disc.
The disc may be damaged. Use a new disc.
NoREAD The disc is dirty or badly scratched. The unit cannot record, play, or edit. (> 18)
This message may appear when the DVD lens cleaner has finished cleaning.
Press [< OPEN/CLOSE] on the main unit to eject the disc. (> 5)
NoWRIT You cannot write to this disc.
The disc may be damaged. Use a new disc.
PLEASE WAIT
§
There was a power failure or the AC plug was disconnected while the unit was on. The unit is carrying out its
recovery process. This process restores the unit to normal operation. The unit is not broken. Wait until the
message disappears.
PROG FULL
§
There are already 32 timer programmes. Delete unnecessary timer programmes. (> 29)
REMOVE The USB device is drawing too much power. Remove the USB device and turn the unit off.
UNFORMAT
§
You inserted an unformatted DVD-RAM, DVD-RW, +RW, an unused +R, +R DL or DVD-RW (DVD-Video format)
that has been recorded on other equipment.
Format the disc to use it.
However all the recorded contents on the disc are deleted. (> 61)
UNSUPPORT
§
You have inserted a disc the unit cannot play or record on. (> 14–15)
You tried to operate with a non-compatible USB memory. (> 16)
F74 The HDMI connection could not be authenticated due to a transfer malfunction.
Consult the dealer where the unit was purchased.
F75 The HDMI connection could not be authenticated due to an internal data malfunction.
Consult the dealer where the unit was purchased.
U59 The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.
Select a position with good ventilation when installing the unit. Do not block the cooling fan on the rear of the unit.
U61 (When a disc is not inserted) Displays when a malfunction has occurred during recording, playback or copy. This is
displayed when the unit is in the recovery process to return to normal operation; it is not broken. Once the display
clears you can use the unit again.
U76 HDMI cannot be output because you are connected to a model that does not support copyright protection.
U80
U81
U99
The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby mode. Now press [Í/I]
on the main unit again to turn the unit on.
U88 (When a disc is inserted) Displays when there was something unusual detected with the disc while recording,
playback or copy. This is displayed when the unit is in the recovery process to return to normal operation; it is not
broken. Once the display clears you can use the unit again. (> 76)
H or F There is something unusual. (The service number displayed after H and F depends on the units condition.)
Check the unit using the troubleshooting guide. If the service number does not disappear, do the following.
1. Disconnect the plug from the household mains socket, wait a few seconds, then reconnect it.
2. Press [Í/I] to turn the power on. (The unit may be fixed.)
If the service number does not disappear despite after doing the above, request service from the dealer. Inform the
dealer of the service number when requesting service. (> 76–82)
X HOLD The Child Lock function is activated.
Press and hold [OK] and [RETURN] at the same time until “X HOLD” disappears. (> 68)
EH59EC-RQT9287-L_eng.book 75 ページ 2008年12月25日 木曜日 午後4時22分
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-EH69 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-EH69 in the language / languages: English as an attachment in your email.

The manual is 11,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMR-EH69

Panasonic DMR-EH69 User Manual - German - 88 pages

Panasonic DMR-EH69 User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info