Manual Panasonic DMR-EH65 (page 77 of 84) (English)

3289

Zoom out

Zoom in

1/84

RQT8432

Sound Page

Operation

No sound.

Low volume.

Distorted sound.

Cannot hear the desired audio

type.

≥Check the connections and the “Digital Audio Output” settings. Check the input mode on the

amplifier if you have connected one.

≥Press [AUDIO] to select the audio.

≥Turn off V.S.S. in the following cases.

–When using discs that do not have surround sound effects such as Karaoke discs.

–When playing bilingual broadcast programmes.

≥[DVD-A] The disc may have a restriction on the method of audio output.

This unit cannot playback multi-channel discs that prevent down-mixing unless the unit is

connected with an HDMI cable to an amplifier supporting CPPM and the HDMI standard

version 1.1. Refer to the disc jacket for more information.

≥Audio may not be output due to how files were created. (DivX)

≥Audio may not be heard when more than 4 devices are connected with HDMI cables.

Reduce the number of connected devices.

≥The sound effects will not work when the bitstream signal is output from the HDMI AV OUT

terminal or the OPTICAL DIGITAL AUDIO OUT terminal.

≥To output audio from a device connected with an HDMI cable, set “Digital Audio Output” to

“HDMI and Optical” in the Setup menu.

≥Depending on the connected equipment, the sound may be distorted if this unit is connected

with an HDMI cable.

≥If recording to the HDD or a DVD-RAM when “Rec for High Speed Copy” is set to “On”, you

can only record either the main or secondary audio of a bilingual broadcast.

If you do not intend to copy the title to a DVD-R, DVD-R DL, DVD-RW (DVD-Video format),

+R, +R DL or +RW set “Rec for High Speed Copy” in the Setup menu to “Off”.

14–16,

—

Cannot switch audio. ≥You cannot switch the audio in the following cases.

–When a DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or +RW disc is in the

disc tray while DVD drive is selected.

–When the recording mode is XP and “Audio Mode for XP Recording” is set to “LPCM”.

–When “Rec for High Speed Copy” is set to “On”.

≥The amplifier is connected using an optical digital cable or an HDMI cable. You cannot switch

the audio if “Dolby Digital” is set to “Bitstream”. Set “Dolby Digital” to “PCM” or connect using

audio cables.

≥There are discs for which audio cannot be changed because of how the disc was created.

—

16, 17,

—

Cannot operate the television.

The remote control doesn’t work.

≥Change the manufacturer code. Some televisions cannot be operated even if you change the

code.

≥The remote control and main unit are using different codes. Change the code on the remote

control.

Press and hold [ENTER] and the indicated number button at the same

time for more than 2 seconds.

≥The batteries are depleted. Replace them with new ones.

≥You are not pointing the remote control at the main unit’s remote control signal sensor during

operation.

≥Coloured glass may obstruct the signal reception/transmission.

≥Don’t place the signal sensor in direct sunlight or in areas that may be subject to sunlight

exposure.

≥It may be necessary to set the code on the remote control again after changing the batteries.

≥It may be necessary to set the manufacturer code again after changing the batteries.

≥The child lock function is activated.

—

The unit is on but cannot be

operated.

≥Recording drive or playback drive has not been selected properly.

≥Some operations may be prohibited by the disc.

≥The unit is hot (“U59” appears on the display). Wait for “U59” to disappear.

≥One of the unit’s safety devices may have been activated.

Reset the unit as follows:

1Press [Í/I] on the main unit to switch the unit to standby.

If the unit doesn’t switch to standby, press and hold [Í/I] on the main unit for about 10

seconds. The unit is forcibly switched to standby.

Alternatively, disconnect the AC mains lead, wait one minute, then reconnect it.

2Press [Í/I] on the main unit to switch it on. If the unit still cannot be operated, consult the

dealer.

24, 34

—

HDD activation is slow. ≥The HDD is in SLEEP mode. (“SLEEP” appears in the unit’s display.) 9

Cannot eject disc. ≥The unit is recording.

≥Linked timer recordings with external equipment is in recording standby (“EXT-L” on the unit’s

display blinks when [Í DVD] is pressed). Press [EXT LINK] to cancel the recording standby.

≥The unit may have a problem. While the unit is off, press and hold [∫] and [CH W] on the

main unit at the same time for about 5 seconds. Remove the disc and consult the dealer.

If the Child Lock function is activated, above operation does not work. Cancel the Child Lock

function.

—

Cannot tune channels.

Cannot download channel

presets from the television.

≥Check the connections.

≥You must connect to a television equipped with the Q Link function with a fully wired 21-pin

Scart cable to download channel presets.

14–15

—

Startup is slow. ≥Make sure that “Quick Start” is set to “On”.

≥Startup takes time in the following situations:

–A disc other than a DVD-RAM is inserted.

–The clock is not set.

–Immediately after a power failure or the AC mains lead is connected.

–For a few minutes after 5:15 am due to system maintenance of this unit.

–When the unit is connected with an HDMI cable.

—

Takes time to read DVD-RAM. ≥It may take time to read a disc if it is being used for the first time in this unit or it has not been

used for a long time.

—

Troubleshooting guide

EH65.book Page 77 Thursday, March 23, 2006 5:18 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-EH65 in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMR-EH65

Panasonic DMR-EH65 User Manual - German - 84 pages

Panasonic DMR-EH65 User Manual - Dutch - 84 pages

Panasonic DMR-EH65 User Manual - French - 84 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic DMR-EH65 Manual

Product: