457640
13
Zoom out
Zoom in
Previous page
1/72
Next page
13
RQT8307
Getting started
You need to subscribe to a cable TV service to enjoy viewing their programming.
Consult your service provider regarding appropriate cable TV box.
If you receive your programming solely from a satellite service, the program guide in this unit will not receive program listings or
channel information. Without this information, program-based recordings cannot be made. However, recordings can still be set
manually.
The connection will allow the video cassette recorder to be used
for playback when this unit is turned off. For optimum operation, it
is recommended that this unit be connected as shown below.
Connection for transferring (dubbing) from video tape (14)
To enjoy even higher picture quality
You can enjoy even higher picture quality, if your television has an
S VIDEO IN or COMPONENT VIDEO IN terminals. (14)
Should I use the AUDIO/VIDEO OUT terminal or
the RF OUT terminal?
If your cable TV box has both AUDIO/VIDEO OUT terminals and
RF OUT terminals, we recommend connecting the AUDIO/VIDEO
OUT terminal with the unit’s IN3 terminal. Using this connection
provides the better picture quality.
The S VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
Why should I connect the IR Blaster?
To download program listings, the TV Guide On Screen
TM
system
needs to be able to change channels on your cable box when the
unit is not in use. Please connect the supplied IR Blaster cable to
the G-LINK jack of the unit. After you connect the IR Blaster cable
you will be able to control your cable box using the units remote
control.
Place the IR Blaster in front of the signal sensor of the cable TV box.
Connection with a cable TV box and video cassette recorder
S
VIDEO
VIDEO
OUT2
OUT2
OUT1
OUT1
Y
P
B
PR
COMPONENT
COMPONENT
VIDEO
VIDEO
OUT
OUT
(
48
48
0p/
p/
48
48
0i
0i
)
AC IN
S
VIDEO
VIDEO
IN3
IN3
IN1
IN1
VH
VH
F / UHF
UHF
G
-
LINK
LINK
RF
RF
IN
IN
RF
RF
OUT
OUT
VIDEO
VIDEO
VIDEO
VIDEO
R-AUDIO-L
R-AUDIO-L
R-AUDIO-L
R-AUDIO-L
DIGITAL AUDIO OUT
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
(PCM/BITSTREAM)
OPTICAL
OPTICAL
VHF/UHF
RF IN
VHF/UHF
RF OUT
AUDIO
R
AUDIO
L
VIDEO
OUT
OUT
AUDIO
R
AUDIO
L
VIDEO
IN
IN
VHF/UHF
RF IN
AUDIO IN
R L
VIDEO IN
VIDEO
RF
S-VIDEO
R L
AUDIO
OUT
IN
7
6
5
4
1
2
3
This unit
Cable TV box
Audio/Video cable
These connections to IN3 are
required for the TV Guide On
Screen
TM
system to work.
Television
Audio/Video cable
Instead of using the Audio/Video
cable, you can also connect the
RF IN terminal on this unit to the
cable TV box RF OUT terminal
using the 75 coaxial cable.
Setting the IR Blaster below
IR Blaster
Insert the IR Blaster
jack into the G-LINK
terminal.
Only use the
included IR Blaster.
Red White Yellow
Video cassette recorder
Red White Yellow
Splitter
75 coaxial
cable
AC power supply cord
Connect only after all other
connections are complete.
To household AC outlet
(AC 120 V, 60 Hz)
To OUT1 or OUT2
Red White Yellow
Cooling fan
indicates included accessories.
indicates accessories not included.
Cable from wall or
antenna signal
To IN3
If your television does not have AUDIO/VIDEO
terminals, an RF modulator is necessary. Consult
your local dealer for more information.
Setting the IR Blaster
Read the cable TV box operating
instructions regarding positioning of the
signal sensor.
If necessary, use the double sided adhesive tape (included) to
secure the IR Blaster to a flat surface.
If you peel off the adhesive tape, the surface may
become damaged.
Once you have confirmed the cable TV box is
operating correctly, secure it by attaching the
adhesive tape.
e.g. Television stand surface
Cable TV box
EH60English.book Page 13 Monday, July 4, 2005 10:39 AM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-EH60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-EH60 in the language / languages: English as an attachment in your email.

The manual is 4,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMR-EH60

Panasonic DMR-EH60 User Manual - English, German - 144 pages

Panasonic DMR-EH60 User Manual - Dutch - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info