502345
38
Zoom out
Zoom in
Previous page
1/84
Next page
38
RQT9059
Linked operations with the TV (VIERA Link “HDAVI Control
TM
”/Q Link)
You can enjoy linked operations with the TV and receiver by using
“HDAVI Control” or Q Link.
Preparation
1 Connect this unit to your TV using an HDMI cable and a fully
wired 21-pin Scart cable (7), or to your receiver using an HDMI
cable (68).
2 Set “VIERA Link” to “On” ( 64). (The default setting is “On”.)
3 Set the “HDAVI Control” operations on the connected equipment
(e.g., TV).
Set the input channel on VIERA to suit the terminal to be
used as “HDAVI Control”.
4 Turn on all “HDAVI Control” compatible equipment and select this
unit’s input channel on the connected TV so that the “HDAVI
Control” function works properly.
Also when the connection or settings are changed, repeat
this procedure.
Preparation
Connect this unit to your TV with a fully wired 21-pin Scart cable
(6).
For your reference
The following systems from other manufacturers have similar
function to Q Link from Panasonic.
For details, refer to your television’s operating instructions or consult
your dealer.
Q Link (registered trademark of Panasonic)
DATA LOGIC (registered trademark of Metz)
Easy Link (registered trademark of Philips)
Megalogic (registered trademark of Grundig)
SMARTLINK (registered trademark of Sony)
What you can do with “HDAVI Control” and Q Link
§1
This button is available only when this unit is on.
§2
When this button is pressed, the playback image is not immediately displayed on the screen and it may not be possible to watch the contents
from where playback started.
In this case, press [:] or [6] to go back to where playback started.
§3
This function is available with the TV which has “HDAVI Control 3” function.
[Note]
These functions may not work normally depending on the equipment condition.
About “HDAVI Control” function, read the manual of the connected equipment (e.g., TV) too.
What is VIERA Link “HDAVI Control”?
VIERA Link “HDAVI Control” is a convenient function that
offers linked operations of this unit, and a Panasonic TV
(VIERA) or receiver under “HDAVI Control”. You can use this
function by connecting the equipment with the HDMI cable.
See the operating instructions for connected equipment for
operational details.
VIERA Link “HDAVI Control”, based on the control functions
provided by HDMI which is an industry standard known as
HDMI CEC (Consumer Electronics Control), is a unique function
that we have developed and added. As such, its operation with
other manufacturers’ equipment that supports HDMI CEC
cannot be guaranteed.
This unit supports “HDAVI Control 3” function.
“HDAVI Control 3” is the newest standard (current as of
December, 2007) for Panasonic’s HDAVI Control compatible
equipment. This standard is compatible with Panasonic’s
conventional HDAVI equipment.
Please refer to individual manuals for other manufacturers’
equipment supporting VIERA Link function.
What is Q Link?
Q Link is a convenient function that offers linked operations of
this unit and a Panasonic TV. You can use this function by
connecting the equipment with a fully wired 21-pin Scart cable.
Download from the TV
[VIERA]Link]
§3
[Q]Link]
When you connect the unit to a TV for the first time, the station list data is automatically copied from the TV
to the unit and the TV stations are assigned to the programme positions on the unit in the same order as
on the TV (8).
(When the TV is on)
Easy playback
[VIERA]Link] [Q]Link]
When the TV is on and the following operations are performed, the TV’s input will automatically switch to
HDMI input mode ([VIERA]Link]) or AV input mode ([Q]Link]) and the TV displays the corresponding action.
(Picture or sound may not be available for the first few seconds.)
Press [FUNCTION MENU]
§1
, [1](PLAY)
§2
, [DIRECT NAVIGATOR], [GUIDE], [ShowView], [PROG/
CHECK] etc.
(When the TV is off)
Power on link
[VIERA]Link] [Q]Link]
When the TV is off and the following operations are performed, the TV will automatically turn on and
displays the corresponding action.
(Picture or sound may not be available for the first few seconds.)
Press [FUNCTION MENU]
§1
, [1](PLAY)
§2
, [DIRECT NAVIGATOR], [GUIDE], [ShowView], [PROG/
CHECK] etc.
[DVD-V] [CD] [VCD] SVCD and MP3
The TV is automatically turned on when you insert the discs.
Power off link
[VIERA]Link] [Q]Link]
When you set the TV to standby mode, the unit is also automatically set to standby mode. The unit is
automatically set to standby mode even if the FUNCTION MENU screen etc. is displayed during playback
or when the unit set to a timer recording.
Even if the TV is set to standby mode, the unit will not be set to standby mode at the same time when
recording, copying, finalising etc.
When this unit is connected to an “HDAVI Control” compatible Panasonic receiver with an HDMI cable,
the receiver will also turn off.
Direct TV Recording
[VIERA]Link]
§3
[Q]Link]
This function allows you to immediately start recording the programme that you are viewing on the TV.
However this function does not work if you select the TV channels on this unit.
Press and hold [¥ DIRECT TV REC] for 1 second.
Recording starts.
The titles are recorded to the HDD.
To stop recording
Press [].
DMREH585EG-RQT9059-L_eng.book 38 ページ 2007年12月24日 月曜日 午後6時42分
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-EH585 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-EH585 in the language / languages: English as an attachment in your email.

The manual is 8,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMR-EH585

Panasonic DMR-EH585 User Manual - German - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info