502345

Panasonic DMR-EH585 Manual

24
Zoom out
Zoom in
Previous page
1/84
Next page
24
RQT9059
Recording broadcasts from external equipment
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
[HDD]
To make a timer recording with your television, connect to a
television with a Q Link function (➡ 38) that you can use for setting
timer recordings using a fully wired 21-pin Scart cable (➡ 6).
1 Make timer programming on the TV.
2 Turn off this unit.
The start and end of recording is controlled by the TV.
≥The titles are recorded to the HDD.
To stop recording
Press [∫].
[Note]
≥When this unit is in EXT LINK standby (“EXT-L” is shown on the
unit’s display), recording from television does not start.
≥Programmes are recorded as one title on this unit when the end
time of the earlier timer recording and the start time of the later
timer recording are close to each other.
To divide the titles, go to “Divide Title” (➡ 41).
Preparation
≥Connect a digital/satellite receiver or decoder to this unit’s input
terminals (➡ 6).
≥When the output signal from the external equipment is NTSC,
change the “TV System” to “NTSC” in the Setup menu (➡ 64).
≥This unit cannot record NTSC signals to discs that already have
PAL signal recordings. (However, both types of programmes can
be recorded onto the HDD.)
≥Press [DRIVE SELECT] to select the HDD or DVD drive.
1 While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g., If you have connected to AV2 input terminals, select “A2”.
2 Press [REC MODE] to select the
recording mode.
3 Select the channel on the other
equipment.
4 Press [¥ REC].
Recording starts.
To skip unwanted parts
Press [;] to pause recording. (Press again to restart recording.)
To stop recording
Press [∫].
To record programmes from digital/satellite receiver using timer
programming
Preparation
≥Make sure you connect the AV2 input terminal of this unit to the
Scart terminal of a VCR or a digital/satellite receiver with a 21-pin
Scart cable (➡ 69).
≥Set “AV2 Input” to match the connected equipment in the Setup
menu (➡ 64).
≥Set “Ext Link” to match the connected equipment in the Setup
menu (➡ 64).
1 Make timer programming on the
external equipment.
2 Press [DRIVE SELECT] to select the
HDD or DVD drive.
If you selected the DVD drive, insert a disc (➡ 14).
3 Press [EXT LINK].
The unit turns off and “EXT-L” lights on the unit’s display to
indicate timer recording standby has been activated.
To cancel the external control
Press [EXT LINK] to stop recording or to cancel linked timer
recording standby.
≥In order to prevent accidental operation, press [EXT LINK] to
cancel the setting after recording is finished.
[Note]
≥This function does not work when “TV System” is set to “NTSC” in
the Setup menu (➡ 64).
≥This function does not work with some equipment. Refer to the
equipment’s operating instructions.
≥The beginnings of recordings may not be recorded correctly in
some cases.
≥When “AV2 Connection” is set to “Decoder”, EXT LINK is not
available (➡ 64).
≥Programmes are recorded as one title on this unit when the end
time of the earlier timer recording and the start time of the later
timer recording are close to each other.
[HDD] [RAM] To divide the titles, go to “Divide Title” (➡ 41).
≥When this unit is in EXT LINK standby (“EXT-L” is shown on the
unit’s display), The GUIDE Plus+ data cannot downloaded.
≥While the unit is in EXT LINK standby mode or recording, video
picture is from the AV2 input terminal irrespective of “AV1 Output”
setting (➡ 64).
≥During EXT LINK standby mode or recording, playback is only
available from the drive performing the recording.
See also “Important notes for recording” (➡ 21).
Making timer recordings on the
television
(e.g., of digital broadcasts)
Recording from digital/satellite receiver
or decoder
Linked timer recordings with external
equipment (digital/satellite receiver) —
EXT LINK
DMREH585EG-RQT9059-L_eng.book 24 ページ ２００７年１２月２４日　月曜日　午後６時４２分
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-EH585 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-EH585 in the language / languages: English as an attachment in your email.

The manual is 8,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMR-EH585

Panasonic DMR-EH585 User Manual - German - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info