Manual Panasonic DMR-EH545 (page 66 of 84) (English, German)

506026

Zoom out

Zoom in

1/84

VQT3N81

Changing the unit’s settings

(All factory default settings are indicated with underlined text.)

Refer to the operating instructions for connected devices to verify

whether or not they can decode each of the audio formats.

(All factory default settings are indicated with underlined text.)

Picture

Comb Filter

Select the picture sharpness when recording.

The setting is fixed with “On” if you set “TV System” to “NTSC”

(> 67).

[On

] Pictures become clear and vivid. Normally, use this

setting.

[Off] Select it when recording noisy pictures.

Still Mode

Select the type of picture shown when you pause play (> 82,

Frames and fields).

[Automatic

]

[Field] Select if jittering occurs when “Automatic” is

selected. (The picture is coarser.)

[Frame] Select if small text or fine patterns cannot be

seen clearly when “Automatic” is selected. (The

picture is clearer and finer.)

Seamless Play

Select the play mode between Playlist chapter segments and

partially deleted titles.

[On

] The chapters in Playlists (Video) are played seamlessly.

This does not work when there are several audio types

included on the Playlist (Video) and when using Quick

View (PLAYa1.3). Additionally, the positioning of chapter

segments may change slightly.

[Off] The points where chapters in Playlists (Video) change are

played accurately, but the picture may freeze for a

moment.

Sound

Dynamic Range Compression

[DVD-V] (Dolby Digital only)

Change the dynamic range for late night viewing.

[On] [Off

]

Bilingual Audio Selection

Select whether to record the main or secondary audio type when:

≥Recording or copying to a DVD-R, DVD-R DL, DVD-RW (DVD-

Video format), +R, +R DL and +RW.

≥“Rec for High Speed Copy” is set to “On”.

≥Recording or copying sound in LPCM (@ right, “Audio Mode for

XP Recording”).

[M 1

][M2]

≥You cannot select the audio on this unit when recording from an

external source, such as when copying from a video cassette

recorder (except from DV equipment connected to this unit’s DV

input terminal). Select the audio on the other equipment.

≥When recording from the unit’s DV terminal, select the type of

audio recording from “Audio Mode for DV Input” (@ right).

Digital Audio Output

Change the settings when you have connected equipment

through this unit’s Digital Audio Output terminal (> 71).

≥Press [OK] to show the following settings.

PCM Down Conversion

Select how to output audio with a sampling frequency of 96 kHz.

≥Signals are converted to 48 kHz despite the settings below if

the signals have a sampling frequency of over 96 kHz, or the

disc has copy protection.

[On] Signals are converted to 48 kHz. (Choose when the

connected equipment cannot process signals with a

sampling frequency of 96 kHz.)

[Off

] Signals are output as 96 kHz. (Choose when the

connected equipment can process signals with a

sampling frequency of 96 kHz.)

Dolby Digital

Select how to output the signal.

Select “Bitstream” if the connected equipment decodes the signal.

Select “PCM” if this unit decodes the signal and outputs it as 2 channels.

≥Not making the proper settings may result in noise.

[Bitstream

] When connected to equipment with a built-in

Dolby Digital decoder.

[PCM] When connected to equipment without a built-in

Dolby Digital decoder.

DTS

Select how to output the signal.

Select “Bitstream” if the connected equipment decodes the

signal.

Select “PCM” if this unit decodes the signal and outputs it as 2

channels.

≥Not making the proper settings may result in noise.

[Bitstream

] When connected to equipment with a built-in DTS

decoder.

[PCM] When connected to equipment without a built-in

DTS decoder.

MPEG

Select how to output the signal.

Select “Bitstream” if the connected equipment decodes the signal.

Select “PCM” if this unit decodes the signal and outputs it as 2

channels.

≥Not making the proper settings may result in noise.

[Bitstream] When connected to equipment with a built-in

MPEG decoder.

[PCM

] When connected to equipment without a built-in

MPEG decoder.

Audio Mode for XP Recording

Choose the audio type when recording or copying with XP mode.

[Dolby Digital

] (> 82) [LPCM] (> 82)

≥The picture quality of LPCM recordings may be lower than that

of normal XP mode recordings.

≥The audio recording becomes Dolby Digital even if you selected

LPCM when using a recording mode other than XP.

≥When recording a bilingual broadcast, select the type of audio in

advance from “Bilingual Audio Selection” (@ left).

Audio Mode for DV Input

You can select the kind of audio when recording from the unit’s DV

input terminal (> 27).

[Stereo 1

] Records audio (L1, R1).

[Stereo 2] Records added audio such as narration (L2, R2)

subsequent to original recording.

[Mix] Records both Stereo 1 and Stereo 2.

≥When recording bilingual broadcast, select the type of audio in

advance from “Bilingual Audio Selection” (@ left).

Display

Language

Choose the language for these menus and on-screen messages.

[English] [Deutsch

] [Français] [Italiano]

[Español] [Nederlands]

On-Screen Messages

Choose whether to show status messages automatically.

[Automatic

][Off]

Grey Background

Select “Off” if you do not want to have the unit show the grey

background when tuner reception is weak.

[On

][Off]

DMR-EH545EG-VQT3N81_eng.book 66 ページ２０１１年３月２日　水曜日　午前１０時５５分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-EH545 in the language / languages: English, German as an attachment in your email.

The manual is 3,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMR-EH545

Panasonic DMR-EH545 User Manual - German - 84 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic DMR-EH545 Manual

Product: