607137
56
Zoom out
Zoom in
Previous page
1/64
Next page
56
RQT6981
Reference
Troubleshooting guide
Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do
not solve the problem:
In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail consumerproducts@panasonic.com,
or the website (http://www.panasonic.com).
In Canada, contact Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www.panasonic.ca),
or an authorized Servicentre closest to you.
Power Page
Operation
Picture
When progressive output is on, refer also to “Progressive video” below.
Progressive video
No power. Insert the AC power supply cord securely into a known active AC outlet. 5
The unit switches to the
standby mode.
This is a power saving feature. You can turn it off if you would prefer (Set Up—Off Timer—
Off). Press [Í, DVD POWER] to turn the unit on.
One of the unit’s safety devices may have activated. Press [Í, DVD POWER] to turn the unit
on.
44
The unit is on but cannot be
operated.
Some operations may be prohibited by the disc.
The unit is hot (“U14” appears on the display). Wait for “U14” to disappear.
One of the unit’s safety devices may have activated.
Reset the unit as follows:
1.Press [Í, DVD POWER] to switch the unit to standby.
If the unit doesn’t switch to standby, press and hold [Í, DVD POWER] for about 10
seconds. The unit is forcibly switched to standby.
Alternatively, disconnect the AC power supply cord, wait one minute, then reconnect it.
2.Press [Í, DVD POWER] to turn the unit on.
55
The images from this unit do
not appear on the television.
Make sure that the television is connected to the AUDIO/VIDEO terminal, S-VIDEO OUT
terminal or COMPONENT VIDEO OUT terminal on this unit.
Make sure that the television’s input setting (e.g., VIDEO 1) is correct.
You have set “TV Type” to “4:3 (480P)” or “16:9 (480P)” in the TV Screen menus, but the
television isn’t compatible with progressive signals. Press and hold [] and [TIME SLIP] on
the unit at the same time for about 5 seconds. The setting will change to interlace.
5
Television reception worsens
after connecting the unit.
This can occur because the signals are being divided between the unit and the television.
It can be solved by using a signal booster, available from audio-visual suppliers. Consult your
dealer if reception does not improve.
Screen size is wrong. Check the settings on your television.
Check the settings for “TV Type”, “4:3 TV Settings for DVD-Video” or “4:3 TV Settings for
DVD-RAM” in the TV Screen menu.
9, 45
On-screen messages do not
appear.
Go to the Display menu and select “Automatic” for “Status Messages”.
Press [STATUS] to show the on-screen messages constantly.
45
43
The blue background does
not appear.
Go to the Display menu and select “On” for “Blue Background”. 45
There is ghosting. Change the settings for “3D NR”, “Block NR”, and “Mosquito NR” to “0” or turn “MPEG-DNR”
off if it is on.
41, 42
Play stops for a moment dur-
ing Quick View.
Play may stop where two play lists join, but this is not a malfunction.
There is ghosting when pro-
gressive output is on.
Set “Progressive” to “OFF”. This problem is caused by the editing method or material used on
DVD-Video, but should be corrected if you use interlace output.
41
There is no apparent change
in picture quality when
adjusted with the Video menu
in the on-screen menus.
The effect is less perceivable with some types of video.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-E60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-E60 in the language / languages: English as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMR-E60

Panasonic DMR-E60 User Manual - German - 76 pages

Panasonic DMR-E60 User Manual - Dutch - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info