560549
22
Zoom out
Zoom in
Previous page
1/128
Next page
Getting started
VQT4W69
22
Settings
1 Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
5 Set Quick Start to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
6 Select the item to match the type of TV
connected.
For details, refer to “TV Aspect”. (> 94)
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
Select “Yes” to proceed to “Easy Network
Setting”. (> 23)
Select “No” to finish the Easy Setting.
To stop partway
Press [RETURN ].
To restart setup
1 Press [FUNCTION MENU]. (> 21)
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Auto Setup” in “DVB Tuning”, then
press [OK].
4 Select “Yes”, then press [OK].
If you are asked to select the auto setup
method, refer to “Auto Setup”. (> 87)
To confirm that channels have been tuned
correctly
Refer to “Using Channel List”. (> 28)
If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
Easy Setting
2 Press [Í] on the remote control or [Í/I] on
this unit.
The Easy Setting will start at the initial
power on.
3 Select the language.
When using a Single cable router
1 Press [RETURN ] after selecting the
language.
2 Go to page 24, step 1.
4 Follow the on-screen instructions and make
the following settings.
Country
Number of cables to connect
Search mode
Auto Setup starts.
These operations (Searching Satellite and
Searching Channels) may take some time.
After tuning has been completed, clock will
be set automatically.
If the clock setting screen appears, set the
time manually (> 99, Clock).
Auto Setup
RETURN
Satellite
Progress
This will take up to 40 minutes.
Checking LNB1
Satellite
LNB in 1 LNB in 2
Press RETURN to skip Satellite installation
Searching Satellite
Checking... Checking...
0%
100%
•On
It is possible to start quickly from standby
mode.
•Off
Power consumption in standby mode is
minimized. (> 117)
However, startup time from standby mode
will be longer.
Timer Setting for Quick Start
“Quick Start” is activated when the set time
comes.
DMR-BST835_735_730EG_eng.book 22 ページ 2013年7月1日 月曜日 午後4時51
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-BST835 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-BST835 in the language / languages: English as an attachment in your email.

The manual is 5,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info