560551
108
Zoom out
Zoom in
Previous page
1/128
Next page
Troubleshooting
VQT4W69
108
Troubleshooting guide
The unit’s TV System is different from that of the
disc. While stopped, keep pressing [](STOP)
and [< OPEN/CLOSE] on the main unit for 5 or
more seconds. The system switches from PAL
to NTSC or vice versa.
Picture may not be seen when more than
4 devices are connected with HDMI cables.
Reduce the number of connected devices.
The picture may be distorted or a black screen
may appear between scenes recorded with
different aspect ratios.
Set “Deep Colour Output” (> 84, 95) or
“Contents Type Flag” (> 84, 95) to “Off”.
3D video is not output correctly.
3D video may be output correctly by changing
the following settings:
- “3D Type” of “3D Settings” (> 94)
- “Signal Format” (> 48, 3D settings during
playback)
Check the settings of the connected TV.
When a non-3D compatible amplifier/receiver is
connected between this unit and a TV, 3D video
is not output. (> 18)
When the amplifier/receiver which is connected
between this unit and a TV is off, 3D video is not
output. (> 18)
3D discs may not be played back correctly due
to the settings of the TV.
When “HDMI Audio Output” is set to “Off”, 3D
video may not be output correctly. (> 95)
The images do not appear on the TV.
The picture is distorted during play, or video
will not play correctly.
Check the connections. (> 16)
Check the settings of the connected TV, etc.
An incorrect resolution is selected in “HDMI
Video Format”. (> 84, 94) Reset the setting as
follows:
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
“00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) until “04 PRG”
is displayed on the unit’s display.
3 Press and hold [OK] for at least 3 seconds.
Set the item again.
When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD audio are not output properly,
select “Yes” in “Default Settings” and make
proper settings. (> 84, 100)
The same video is displayed in each left and
right half of the screen.
This is a 3D programme of the Side-by-Side
type.
Change the setting as follows if connecting with
a 3D compatible TV:
1 Press [OPTION].
2 Select “Playback Settings” in “Playback
Menu”, then press [OK].
3 Select “3D Settings”, then press [OK].
4 Select “Side by side” in “Signal Format”, then
press [OK].
DMR-BST835_735_730EG_eng.book 108 ページ 2013年7月1日 月曜日 午後4時51分
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-BST730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-BST730 in the language / languages: English as an attachment in your email.

The manual is 5,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info