457746
105
Zoom out
Zoom in
Previous page
1/120
Next page
Troubleshooting
VQT3C73
105
Digital broadcasts cannot be received.
¾ The dish may not be pointing in the direction of the
satellite. If problem persists consult your local TV aerial
installer.
¾ To receive an encrypted broadcast, a CI module valid for
the broadcast is required.
¾ When you use only one terminal, you may not view
correctly if you connect the satellite cable to the LNB IN 2
terminal.
¾ When you use single cable router, additional settings are
required. (> 26)
Picture regularly breaks up on some
channels.
¾ Adjust the aerial reception with “Manual Tuning”. (> 85)
Picture very infrequently breaks up on some
or all channels.
¾ Electrical atmospheric interference caused by local or
distant lightning storms or heavy rain with wind in “leafy”
locations may cause pictures to break up and audio to
mute or distort momentarily.
¾ The receiver (LNB) of the satellite dish must be suitable
for digital reception.
VIERA Link doesn’t work.
¾ Some functions may not work depending on the version
of “HDAVI Control” of the connected equipment. This unit
supports “HDAVI Control 5” functions.
¾ If the connection for the equipment connected with HDMI
was changed, or if there was a power failure or the plug
was removed from the household mains socket, “HDAVI
Control” may not work.
In this case, change TV (VIERA) setting for HDAVI
Control” again.
You cannot access this unit from DLNA
compatible equipment on the network.
¾ Check the network connection and the network settings.
(> 16, 23, 80, 81, 93)
¾ It may not be possible to connect depending on the types
of the equipment or the status of the equipment.
When using Wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
¾ Use 802.11n (2.4 GHz or 5 GHz) Wireless router.
Set the encryption type to “AES” (> 93, Wireless
Settings).
Simultaneous use with a microwave, cordless telephone
etc. at 2.4 GHz may result in connection interruptions or
other problems.
¾ On the “Wireless Settings” screen (> 93), the continuous
lighting of at least 4 “Reception” indicators is the target
for a stable connection. If 3 or fewer indicators are lit or
the connection is being interrupted, change the position
or angle of your Wireless router and see if the connection
state improves. If there is no improvement, connect to a
wired network and perform the “Network Easy Setting”
(> 23) again.
To return all the settings to the factory preset
¾ Perform “Shipping Condition” or “Default Settings.
(> 96)
To reset the rating level settings
¾ The rating level returns to the factory preset.
1 While the unit is on, press and hold [OK], the yellow
button and the blue button on the remote control at
the same time for more than 5 seconds.
“00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or
[Í/I] on the main unit until “03 VL” is displayed on the
units display.
3 Press [OK] on the remote control or
[< OPEN/CLOSE] on the main unit.
“INIT” is displayed on the unit’s display.
Broadcast
VIERA Link
Network
To reset this unit
DMRBST800700701EG_eng.book 105 ページ 2011年4月26日 火曜日 午後5時27分
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-BST700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-BST700 in the language / languages: English as an attachment in your email.

The manual is 5,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMR-BST700

Panasonic DMR-BST700 User Manual - German - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info