607140
109
Zoom out
Zoom in
Previous page
1/128
Next page
Troubleshooting
SQT0300
109
“0:00” is flashing on the front panel display.
Set the clock. (> 87, 102)
The clock does not display on the unit when
switched to standby.
The clock does not display when “Front Panel
Display” is set to “Automatic”. (> 97)
Screen size is wrong.
Check the “TV Aspect” or “Aspect for 4:3 Video”.
(> 98)
Adjust the aspect ratio setting on TV.
Adjust the aspect ratio setting on this unit.
(> 107)
If you connect to 4:3 TV, set “HDMI Video
Format” to “576p/480p”. (> 87, 98)
Check “Aspect for Recording” before recording
or file conversion. (> 87, 94)
[BCT845] [BCT745] [BCT74 0]
TV reception is not displayed.
Broadcast signals are not output from this unit’s
RF OUT terminal. Select “On” in “RF OUT
( CATV Signal )” or “RF OUT ( Aerial Signal )”.
(> 87, 102)
The black screen appears on the TV.
This phenomenon may occur, depending on the
TV setting, when “Quick Start” is activated.
Depending on the TV, this phenomenon may be
prevented by reconnecting to a different HDMI
input terminal.
Picture does not appear with the HD quality
although HD setting was made.
The pictures are output with 576p/480p
depending on the title.
The screen changes automatically.
If “Screen Saver” is set to “On”, the screen saver
function will be activated when there is no
operation for 5 minutes or more. (> 97)
There is a lot of image lag when playing video.
Set to “0” all items in the “Noise Reduction”.
(> 86)
Set “Audio Delay”. (> 87, 97)
The unit’s TV System is different from that of the
disc. Change the TV System. (> 98, TV
System)
Picture may not be seen when more than
4 devices are connected with HDMI cables.
Reduce the number of connected devices.
The picture may be distorted or a black screen
may appear between scenes recorded with
different aspect ratios.
Set “Deep Colour Output” (> 87, 98) or
“Contents Type Flag” (> 87, 99) to “Off”.
Displays
TV screen and video
The images do not appear on the TV.
The picture is distorted during play, or video
is not played correctly.
Check the connections. (> 16)
Check the settings of the connected TV, etc.
An incorrect resolution is selected in “HDMI
Video Format”. (> 87, 98) Reset the setting as
follows:
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
“00 RET” is displayed on the front panel
display.
2 Repeatedly press [1] (right) until “04 PRG”
is displayed on the front panel display.
3 Press and hold [OK] for at least 3 seconds.
Set the item again.
When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD
®
audio are not output
properly, select “Yes” in “Default Settings”
and make proper settings. (> 87, 103)
DMR-BST_BCT845_745_740EG_eng.book 109 ページ 2014年7月2日 水曜日 午後5時44分
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-BCT845 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-BCT845 in the language / languages: English as an attachment in your email.

The manual is 5,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMR-BCT845

Panasonic DMR-BCT845 User Manual - German - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info