511767
100
Zoom out
Zoom in
Previous page
1/128
Next page
Convenient functions
VQT4G51
100
Changing the unit’s settings (Setup)
Automatic Standby after Copy
•On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing copy (> 56, Copying from
media other than HDD with DIRECT
NAVIGATOR, Copying titles with copying
list).
RF OUT ( CATV Signal )
Set whether to output the broadcasting signal
from RF OUT or not while in standby mode
(When “Power Save in Standby” is activated).
If “On” is selected, the broadcasting signal
is output from this unit.
Remote Control
Change the remote control code on the main unit
and the remote control if you place other
Panasonic products close together.
Use “BD 1”, the factory set code, under normal
circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the
number button ([1] to [6]) for more than
5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
Operation is possible only with Panasonic
remote controls with “IR6” printed at the bottom
when the remote control code of this unit is set
to “BD 4”, “BD 5” or “BD 6”.
IR6
BLU-RAY DISC RECORDER
IR6
IR6
Clock
If the time is not set correctly, use the settings
listed in the method below.
Automatic
This unit usually obtains time and date
information from digital broadcasts.
Time Zone
When the time is not correct, set “Time Zone”.
(GMT - 6 to + 6)
Manual Setting
1 Select “Off” of “Automatic”, then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the
settings.
When the clock is set manually, you cannot perform
playing/recording/PAUSE LIVE TV/REWIND LIVE TV of
the programmes that are copy protected (Copying is
prohibited). (> 15)
PIN Entry
You can set/change the PIN for parental control.
1 Enter your 4-digit PIN with the number
buttons.
2 Enter the new 4-digit PIN with the number
buttons.
Make a note of PIN in case you forget it.
e.g.,
3 Press [OK].
System Update
Software Update in Standby
When you set this unit to standby mode,
software (firmware) updates (> 102) are
downloaded automatically at the time you
have specified.
OK
Remember the PIN.
PIN Entry
0 0 0 0
DMR-BCT820_720_721EG_eng.book 100 ページ 2012年8月1日 水曜日 午後5時18分
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-BCT721 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-BCT721 in the language / languages: English as an attachment in your email.

The manual is 5,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMR-BCT721

Panasonic DMR-BCT721 User Manual - German - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info