603089
24
Zoom out
Zoom in
Previous page
1/36
Next page
24
SQT0126
HDMI Output
Press [OK] to show the following settings:
¾ HDMI Video Format
The items supported by the connected devices
are indicated on the screen as “¢”. When any
item without “¢” is selected, the images may be
distorted.
If “Automatic” is selected, the best suited
output resolution to the connected TV is
automatically selected.
To enjoy high-definition video up-converted to
1080p, you need to connect the unit directly
to 1080p compatible HDTV (High Definition
TV). If this unit is connected to an HDTV
through other equipment, the other equipment
must also be 1080p compatible.
¾ 24p Output
When playing DVD-Video, set to “On” and
then set “24p” in “Picture Settings” (> 23) to
“On”.
When BD-Video/DVD-Video images other
than 24p are played, images are output at
60p.
¾ Deep Colour Output
This setting is for selecting whether to use Deep
Colour Output when a TV that supports Deep
Colour is connected.
¾ Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
Dynamic Range Compression
You can listen at low volumes but still hear
dialogue clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
Digital Audio Output
Press [OK] to show the following settings:
¾ Dolby D/Dolby D +/Dolby TrueHD
¾ DTS/DTS-HD
Select the audio signal to output.
Select “PCM”, when the connected
equipment cannot decode the respective
audio format. This unit decodes the audio
format and transmits to the connected
equipment.
If you do not make proper settings the audio
may be static or noisy.
¾ BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If “Off” is selected, the unit outputs the primary
audio only.
Downmix
Select the downmix system of multi-channel to
2-channel sound.
Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
The downmix effect is not available when
“Digital Audio Output” is set to “Bitstream”.
The audio will be output in “Stereo” in the
following cases:
AVCHD playback
Playback of secondary audio (including the
button click sound).
DTS Neo:6
2ch (2.1ch) audio is expanded to 7ch (7.1ch).
This function works when the following
conditions are met:
Audio recorded at 96 kHz or lower is output.
“Digital Audio Output” is set to “
PCM
” when
audio other than PCM is output.
When this unit is connected to a TV supporting
1080/24p output, movies and other material
recorded at 24p* are output at 24p.
* A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.
Sound
“Automatic” is effective only when playing
Dolby TrueHD.
DMP-BDT260&161&160&BD91&81_EBGNGCGAGW-SQT0126_eng.book 24 ページ 2014年2月28日 金曜日 午前10時44分
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMPBDT161GC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMPBDT161GC in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info