Manual Panasonic DMPBD80 (page 40 of 48) (English)

602973

Zoom out

Zoom in

1/48

RQT9401-2B

Operating Instructions

Blu-ray Disc Player

Model No. DMP-BD80

DMP-BD60

The illustration shows the image of DMP-BD80.

Dear customer

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

Before connecting, operating or adjusting this product, please read the instructions completely.

Please keep this manual for future reference.

Note: “EB” on the packaging indicates the United Kingdom.

Region management information

BD-Video

This unit plays BD-Video marked with labels containing the region code B.

Example:

DVD-Video

This unit plays DVD-Video marked with labels containing the region number “2” or “ALL”.

Example:

2 ALL

until

2009/4/01

DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 1 ページ２００９年２月２７日　金曜日　午後８時２分

RQT9401

Caution for AC Mains Lead

(For the United Kingdom and Republic of Ireland)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains plug for

your safety and convenience.

A 5-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that the

replacement fuse has a rating of 5-ampere and that it is approved by

ASTA or BSI to BS1362.

Check for the ASTA mark Ï or the BSI mark Ì on the body of the

fuse.

If the plug contains a removable fuse cover you must ensure that it is

refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a

replacement cover is obtained.

A replacement fuse cover can be purchased from your local dealer.

If a new plug is to be fitted please observe the wiring code as stated below.

If in any doubt please consult a qualified electrician.

IMPORTANT

The wires in this mains lead are coloured in accordance with the

following code:

Blue: Neutral, Brown: Live.

As these colours may not correspond with the coloured markings

identifying the terminals in your plug, proceed as follows:

The wire which is coloured Blue must be connected to the terminal

which is marked with the letter N or coloured Black or Blue.

The wire which is coloured Brown must be connected to the terminal

which is marked with the letter L or coloured Brown or Red.

WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH

TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE

EARTH SYMBOL Ó OR COLOURED GREEN OR GREEN/

YELLOW.

THIS PLUG IS NOT WATERPROOF—KEEP DRY.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug

(figures A and B). Confirm the AC mains plug fitted and follow the

instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse cover.

Safety precautions

Set the unit up on an even surface away from direct sunlight, high

temperatures, high humidity, and excessive vibration. These

conditions can damage the cabinet and other components, thereby

shortening the unit’s service life. Do not place heavy items on the unit.

Do not use high voltage power sources. This can overload the unit and

cause a fire. Do not use a DC power source. Check the source carefully

when setting the unit up on a ship or other place where DC is used.

Ensure the AC mains lead is connected correctly and not damaged.

Poor connection and lead damage can cause fire or electric shock.

Do not pull, bend, or place heavy items on the lead.

Grasp the plug firmly when unplugging the lead. Pulling the AC

mains lead can cause electric shock. Do not handle the plug with

wet hands. This can cause electric shock.

Do not let metal objects fall inside the unit. This can cause electric

shock or malfunction.

Do not let liquids get into the unit. This can cause electric shock or

malfunction. If this occurs, immediately disconnect the unit from the

power supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain

flammable gases which can ignite if sprayed into the unit.

Do not attempt to repair this unit by yourself. If sound is interrupted,

indicators fail to light, smoke appears, or any other problem that is

not covered in these instructions occurs, disconnect the AC mains

lead and contact your dealer or an authorized service center. Electric

shock or damage to the unit can occur if the unit is repaired,

disassembled or reconstructed by unqualified persons.

Extend operating life by disconnecting the unit from the power

source if it is not to be used for a long time.

CAUTION!

IF THE FITTED MOULDED PLUG IS

UNSUITABLE FOR THE SOCKET OUTLET IN

YOUR HOME THEN THE FUSE SHOULD BE

REMOVED AND THE PLUG CUT OFF AND

DISPOSED OF SAFELY.

THERE IS A DANGER OF SEVERE

ELECTRICAL SHOCK IF THE CUT OFF PLUG

IS INSERTED INTO ANY 13-AMPERE

SOCKET.

Fuse cover

Figure A Figure B

Fuse cover

Figure A Figure B

Fuse

(5 ampere)

Fuse

(5 ampere)

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER

SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT

DAMAGE,

≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE,

DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH

LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE

APPARATUS.

≥ USE ONLY THE RECOMMENDED ACCESSORIES.

≥ DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION!

≥DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN

CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS

WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR

FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS

AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE

VENTILATION VENTS.

≥DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH

NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.

≥DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED

CANDLES, ON THE UNIT.

≥DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY

MANNER.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type recommended by the

manufacturer. Dispose of used batteries according to the

manufacturer’s instructions.

This product may receive radio interference caused by mobile

telephones during use. If such interference is apparent, please

increase separation between the product and the mobile

telephone.

The socket outlet shall be installed near the equipment and easily

accessible.

The mains plug of the power supply cord shall remain readily

operable.

To completely disconnect this apparatus from the AC Mains,

disconnect the power supply cord plug from AC receptacle.

THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.

Placement

Voltage

AC mains lead protection

Foreign matter

Service

DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 2 ページ２００９年２月６日　金曜日　午後５時２２分

RQT9401

Unit and media care

Clean discs

Wipe with a damp cloth and then wipe dry.

Disc and card handling precautions

≥Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc.

≥Do not attach labels or stickers to discs (This may cause disc warping, rendering it unusable).

≥Do not write on the label side with a ball-point pen or other writing instrument.

≥Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.

≥Do not use scratch-proof protectors or covers.

≥Clean any dust, water, or foreign matter from the terminals on the rear side of the card.

≥Do not use the following discs:

– Discs with exposed adhesive from removed stickers or labels (rented discs etc).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart shapes.

Clean this unit with a soft, dry cloth

≥Never use alcohol, paint thinner or benzine to clean this unit.

≥Before using chemically treated cloth, carefully read the instructions that came with the cloth.

Observe the following points to ensure continued listening and viewing pleasure.

Dust and dirt may adhere to the unit’s lens over time, making it impossible to play discs.

Use the lens cleaner (not included) about once every year, depending on frequency of use and the operating environment. Carefully read the lens

cleaner’s instructions before use.

This unit may record information of your operating procedures. If you discard this unit either by disposal or transfer, then follow the procedures to

return all the settings to the factory presets to delete the recorded information. ( 38, “To return to the factory preset”)

≥When BD-Video is played back, the operation history may be recorded in the memory of this unit. The recorded contents differ depending on the

disc.

Disc and card handling

DO NOT

Maintenance

Lens cleaner: RP-CL720E

≥This lens cleaner is not for sale in Germany and may not be for

sale depending on the region.

≥This lens cleaner is sold as specific for DIGA, but can be used

without problem on this unit as well.

To dispose or transfer this unit

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products

and batteries should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection

points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential

negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries, please contact your local municipality, your

waste disposal service or the point of sale where you purchased the items.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or

dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the

Directive for the chemical involved.

Getting started

DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 3 ページ２００９年２月６日　金曜日　午後５時２２分

RQT9401

Table of contents

Caution for AC Mains Lead ....................... 2

Safety precautions..................................... 2

Unit and media care................................... 3

Accessory information .............................. 5

Using the remote control .......................... 5

Media (Disc, card and USB device)

information ................................................. 6

Connection ................................................. 8

Control reference guide .......................... 11

Easy Setting ............................................. 12

Setting the television and amplifier/

receiver operation.................................... 12

Network connection................................. 13

Firmware updating................................... 13

Network settings...................................... 14

Basic operation ........................................ 16

Chapter playback..................................... 18

Playing HD Video or SD Video................ 18

Enjoying BD-LIVE or BONUSVIEW in

BD-Video................................................... 19

Enjoying High Bit rate Audio and Video

................................................................... 20

Playing music........................................... 21

Playing still pictures................................ 22

Playing DivX

videos ............................... 24

Enjoying VIERA CAST

.......................... 25

Showing FUNCTIONS menu ................... 25

Changing settings with the on-screen

menu ......................................................... 26

Linked operations with the TV (VIERA Link

“HDAVI Control

”) .................................. 28

Changing the unit’s settings ................... 29

About MP3/JPEG/DivX files.....................34

Messages ..................................................36

Troubleshooting guide.............................38

Glossary.................................................... 42

Specifications...........................................44

Index...........................................Back cover

Getting started

Playback

Settings

Reference

About descriptions in these operating instructions

≥These operating instructions are applicable to models DMP-BD80 and DMP-BD60. Unless otherwise indicated, illustrations in these

operating instructions are of DMP-BD80.

[BD80] : indicates features applicable to DMP-BD80 only.

[BD60] : indicates features applicable to DMP-BD60 only.

DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 4 ページ２００９年２月６日　金曜日　午後５時２２分

RQT9401

Accessory information

\For\the\United\Kingdom\and\Republic\of\Ireland\

∫ Sales and Support Information

Customer Care Centre

≥For customers within the UK: 0844 844 3852

≥For customers within the Republic of Ireland: 01 289 8333

≥Visit our website for product information

≥E-mail: customer.care@panasonic.co.uk

Direct Sales at Panasonic UK

≥For customers: 0844 844 3856

≥Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Monday–Thursday

9:00 a.m.–5:30 p.m., Friday 9:30 a.m.–5:30 p.m. (Excluding public holidays)

≥Or go on line through our Internet Accessory ordering application at www.panasonic.co.uk

≥Most major credit and debit cards accepted.

≥All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd.

≥It couldn’t be simpler!

≥Also available through our Internet is direct shopping for a wide range of finished products, take a browse on our website for further details.

Interested in purchasing an extended guarantee?

Please call 0870 240 6284 or visit our website www.panasonic.co.uk/guarantee

Using the remote control

Batteries

Insert so the poles (i and j) match those in the remote control.

When closing the lid, insert it from the j (minus) side.

≥Use alkaline or manganese batteries.

≥Do not mix old and new batteries.

≥Do not use different types at the same time.

≥Do not heat or expose to flame.

≥Do not leave the battery(ies) in an automobile exposed to direct

sunlight for a long period of time with doors and windows closed.

≥Do not take apart or short circuit.

≥Do not attempt to recharge alkaline or manganese batteries.

≥Do not use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can

damage items the fluid contacts and may cause a fire.

Remove batteries if the remote control is not going to be used for a

long period of time. Store in a cool, dark place.

Use

If you cannot operate the unit or other equipment using the remote

control after changing the batteries, please re-enter the codes

( 12, 41).

Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.

(Product numbers correct as of January 2009. These may be subject to change.)

∏∏ ∏

1 Remote control

(N2QAYB000380)

1 Audio/Video cable

(K2KA2BA00003)

2 Batteries

for remote control

(R6/LR6, AA)

∏

For Continental Europe For the United Kingdom and

Republic of Ireland

1 AC mains lead

(RJA0043-1C)

1 AC mains lead

(K2CT3CA00004)

≥For use with this unit only. Do not use it with other equipment.

Also, do not use cords for other equipment with this unit.

R6/LR6, AA





20˚

30˚

20˚

30˚

Remote control signal sensor

7 m directly in front of the unit

Getting started

DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 5 ページ２００９年２月６日　金曜日　午後５時２２分

RQT9401

Media (Disc, card and USB device)

information

This chart shows the different type of retail/commercial discs you can use, and also includes the industry-standard logos that should appear on

the discs and/or packaging.

This chart shows the different type of discs recorded with other devices that you can use.

This mark means you must finalize the disc with the DVD recorder, etc. before playback. For details about finalizing, refer to

the operating instructions for your equipment.

Packaged discs

Type of media/

Logo

Features Indicated as

Type of media/

Logo

Features Indicated as

BD-Video

High Definition (HD)

movie and music discs

≥Discs supporting

BD-Live (BD-ROM

Profile 2) that allows

interactive functions to

be used when this unit

is connected to the

Internet in addition to

the BONUSVIEW

function.

≥Discs supporting

BONUSVIEW

(BD-ROM Profile 1

version 1.1/Final

Standard Profile) that

allows

Picture-in-Picture

functions to be used.

[BD-V]

DVD-Video

High quality movie and

music discs

[DVD-V]

Compact Discs (CD’s)

that contain audio and

music

≥Operation and sound

quality of CDs that do

not conform to CD-DA

specifications (copy

control CDs, etc.)

cannot be guaranteed.

[CD]

Recorded discs

Finalized

Type of media/

Logo

Formats Indicated as

Type of media/

Logo

Formats Indicated as

BD-RE

≥Version 3 of the BD-RE

Recording Format

≥JPEG format

[BD-V]

[JPEG]

DVD-R DL

≥DVD-Video Format

≥Version 1.2 of the DVD

Video Recording

Format

≥MP3 format

≥JPEG format

≥AVCHD format

≥DivX format

[DVD-V]

[DVD-VR]

[MP3]

[JPEG]

[AVCHD]

[DivX]

BD-R

≥Version 2 of the BD-R

Recording Format

[BD-V]

rR/rRW/

rRDL

≥+VR (+R/+RW Video

Recording) Format

≥AVCHD format

[DVD-V]

[AVCHD]

DVD-RAM

≥Version 1.1 of the DVD

Video Recording

Format

≥JPEG format

≥AVCHD format

[DVD-VR]

[JPEG]

[AVCHD]

CD-R/RW

≥CD-DA format

≥MP3 format

≥JPEG format

≥DivX format

[CD]

[MP3]

[JPEG]

[DivX]

DVD-R/RW

≥DVD-Video Format

≥Version 1.1 of the DVD

Video Recording

Format

≥MP3 format (DVD-RW

is not supported)

≥JPEG format (DVD-RW

is not supported)

≥AVCHD format

≥DivX format (DVD-RW

is not supported)

[DVD-V]

[DVD-VR]

[MP3]

[JPEG]

[AVCHD]

[DivX]

≥It may not be possible to play the above discs in some cases

due to the type of discs, the condition of the recording, the

recording method and how the files were created.

≥When a disc recorded in the AVCHD format is being played, the

video may be paused for a few seconds at portions spliced, due

to deletion or editing.

■ About playback compatibility for BD-R and BD-RE

with high definition recordings of high definition

broadcasts

With DMP-BD60/80 purchased in the below countries, it is

possible to playback discs with recordings of the high definition

broadcasts listed to the right which were recorded with

Panasonic

Blu-ray Disc

recorders.

As high definition broadcasts are a new technology, areas

confirmed as of March 2009 are as below.

Country Digital Broadcast

France TNT HD

(Compatible models DMP-BD60EF, DMP-BD80EG)

United Kingdom freesat

(Compatible models DMP-BD60EB, DMP-BD80EB)

Finalized

DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 6 ページ２００９年２月２７日　金曜日　午後８時２分

RQT9401

This chart shows the different type of cards recorded with other devices that you can use.

Including miniSD Card and microSD Card

In these operating instructions, the cards shown in the table

( above) are comprehensively called SD cards.

≥A miniSD Card and a microSD Card must be used with

the attached adaptor that comes with the card.

≥When using from 4 GB to 32 GB SD cards, only SD

cards that display the SDHC logo can be used.

≥This unit is compatible with SD Memory Cards that meet

SD Card Specifications FAT12 and FAT16 formats, as

well as SDHC Memory Cards in FAT32 format.

≥Useable memory is slightly less than the card capacity.

≥If the SD card is formatted on a PC, you may not be able to use it

on this unit.

≥We recommend using a Panasonic SD card.

Please confirm the latest information on the following website.

http://panasonic.co.jp/pavc/global/cs

(This site is in English only.)

≥Keep the Memory Card out of reach of children to prevent

swallowing.

≥When a card recorded in the AVCHD format is being played, the

video may be paused for a few seconds at portions spliced, due to

deletion or edition.

≥Switch the write-protect switch to the “LOCK” position to protect

the content from accidental erasure.

This unit can playback pictures by connecting the USB memory recorded with a PC or similar in following formats, and Panasonic digital cameras

connected via USB cable.

Compatible USB devices

≥USB devices which are defined as USB mass storage class.

– USB devices that support USB 1.0/1.1 and USB 2.0 Full Speed/

High Speed.

≥USB devices of up to 128 GB can be used.

≥USB devices that support bulk only transfer.

CBI (Control/Bulk/Interrupt) is not supported.

≥Digital Cameras which require additional programme installation

when connected to a PC are not supported.

≥MTP (Media Transport Protocol) device is not supported.

≥A multi-port USB card reader is not supported.

File system

≥FAT12, FAT16 and FAT32 file systems are supported.

≥UDF/NTFS/exFAT file system is not supported.

≥Depending on the sector size, some files may not work.

≥Only the first partition on USB devices with multi-partition is

supported.

Despite meeting the conditions mentioned above, there may be USB

device that cannot be used with this unit.

This unit does not support USB device charging.

SD cards

Type of media Formats Indicated as

SD Memory Card

(from 8 MB to 2 GB)

SDHC Memory Card

(from 4 GB to 32 GB)

≥JPEG format

≥AVCHD format

≥MPEG2 format

[JPEG]

[AVCHD]

[MPEG2]

ADAPTER

USB device

Type of media Formats Indicated as

USB device

≥MP3 format

≥JPEG format

≥DivX format

[MP3]

[JPEG]

[DivX]

Discs that cannot be played

≥BD-RE with the cartridge

≥2.6 GB and 5.2 GB DVD-RAM

≥3.95 GB and 4.7 GB DVD-R for Authoring

≥DVD-RAM that cannot be removed from their cartridges

≥Version 1.0 of DVD-RW

≥DVD-ROM, CD-ROM, CDV, SACD, Photo CD, MV-Disc and PD

≥DVD-Audio

≥Video CD and SVCD

≥WMA discs

≥HD DVD

≥Other discs that are not specifically supported

Getting started

DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 7 ページ２００９年２月６日　金曜日　午後５時２２分

RQT9401

Connection

≥Do not place the unit on amplifiers/receiver or equipment that may become hot. The heat can damage the unit.

≥Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not be displayed properly.

≥Turn off all equipment before connection and read the appropriate operating instructions.

The image quality improves in a sequence of connections C, B, A, given below.

≥Non-HDMI-compliant cables cannot be utilized.

≥Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). It is recommended that you use Panasonic’s

HDMI cable.

Recommended part number:

RP-CDHG10 (1.0 m), RP-CDHG15 (1.5 m), RP-CDHG20 (2.0 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc.

≥This unit incorporates HDMI (Deep Colour, x.v.Colour

, High Bit rate Audio) technology. ( 42, 43)

≥When outputting 1080p signal, please use HDMI cables 5.0 meters or less.

\For\the\United\Kingdom\and\Republic\of\Ireland\only\

BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION.

Connecting to a television

A Connecting to HDMI AV OUT terminal

You can enjoy high quality, digital video and audio.

NECESSARY SETTINGS

≥“HDMI Video Mode” and “HDMI Audio

Output”: “On” ( 31)

To enjoy a richer sound

≥Use connections D, E, F or G ( 9–10)

additionally.

In case of the connection E, F or G, set

“HDMI Audio Output” to “Off” ( 31)

With this connection, you can use VIERA

Link “HDAVI Control” ( 28).

B Connecting to COMPONENT VIDEO OUT terminal

You can enjoy high definition images by connecting to a component video terminals that supports 720p (750p) and 1080i (1125i) signals.

NECESSARY SETTINGS

≥[BD80] “Analog Audio Output”: “2ch

(Downmix) + 5.1ch” ( 31)

≥[BD80] Set “High Clarity Sound” on the

on-screen menu to “Off” ( 27).

(Otherwise, the video will not be output.)

≥Connect terminals of the same color.

≥Unplug the yellow plug of Audio/Video

cable.

≥The video output resolution is restricted to

“576p/480p” when DVD-Video discs, DivX

and BD-Video discs recorded at a rate of

50 field per second are output from the

COMPONENT VIDEO OUT terminals.

To enjoy a richer sound

≥Use connections D, E, F or G ( 9–10)

additionally.

(Unplug the red and white plugs.)

To enjoy high definition/progressive

video

≥Connect to a television that supports 576p/

480p or higher.

≥Set “Component Resolution” to “576p/

480p”, “720p” or “1080i”. ( 31)

≥If this unit is connected to an amplifier/

receiver, etc. via an HDMI cable with

“HDMI Video Mode” to “On” ( 31), the

video will be fixed to 576i/480i.

HDMI IN

HDMI AV OUT

HDMI

compatible

television

HDMI cable

Back of the unit

NOTE

TIPS

COMPONENT

VIDEO IN

AUDIO IN

R L

Back of the unit

Audio/Video cable

(included)

Component

Video cable

Television

NOTE

TIPS

DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 8 ページ２００９年２月６日　金曜日　午後５時２２分

RQT9401

C Connecting to VIDEO OUT terminal

NECESSARY SETTINGS

≥[BD80] “Analog Audio Output”: “2ch

(Downmix) + 5.1ch” ( 31)

≥[BD80] Set “High Clarity Sound” on the

on-screen menu to “Off” ( 27).

(Otherwise, the video will not be output.)

≥Connect terminals of the same color.

≥High definition video cannot be output with

this connection.

Use connection A or B ( 8) for high

definition video.

With audio cables, connect the AUDIO

OUT terminals to the two-channel audio

input terminals of an analog amplifier/

receiver or system component in place of a

television to enjoy stereo sound.

To enjoy a richer sound

≥Use connections D, E, F or G ( 9–10)

additionally.

(Unplug the red and white plugs.)

AUDIO IN

R L

VIDEO IN

AUDIO/VIDEO IN

2ch AUDIO OUT

Television

Audio/Video cable

(included)

VIDEO OUT

Back of the unit

NOTE

TIPS

Connecting an amplifier/receiver

D Connecting to HDMI AV OUT terminal

When connected to a compatible amplifier/receiver, you can enjoy surround sound recorded with Dolby Digital Plus, Dolby TrueHD or

DTS-HD.

NECESSARY SETTINGS

≥“HDMI Video Mode” and “HDMI Audio

Output”: “On” ( 31)

≥“Digital Audio Output”: Depending on the

connected amplifier/receiver ( 30)

With this connection, you can use VIERA

Link “HDAVI Control” ( 28).

≥Enjoying High Bit rate Audio with 7.1ch

speaker and 5.1ch speaker ( 20)

HDMI IN

Multi channel speakers

HDMI cable

Amplifier/receiver

HDMI

compatible

television

HDMI INHDMI OUT

Back of the unit

NOTE

TIPS

E Connecting to 7.1ch AUDIO OUT terminal [BD80]

When connected to a compatible amplifier/receiver using the 7.1ch AUDIO OUT terminals, you can enjoy surround sound.

NECESSARY SETTINGS

≥“Analog Audio Output”: “7.1ch” ( 31)

≥Enjoying High Bit rate Audio with 7.1ch

speaker and 5.1ch speaker ( 20)

When connecting amplifier/receiver or

other devices with HDMI AV OUT terminal

≥“HDMI Audio Output” : “Off” ( 31)

(Otherwise, depending on the

specifications of connected devices, the

audio from AUDIO OUT terminal may be

output as two channels only.)

When connecting a television with HDMI

AV OUT terminal ( 8, A).

≥“HDMI Audio Output” : “Off” ( 31)

(Otherwise, the sound may not be output

with the desired audio.)

≥Depending on how the disc was recorded,

the audio may not be output properly on

the number of channels desired.

Cable connections

a Surround back speaker (L/R)

b Front speaker (L/R)

c Surround speaker (L/R)

d Center speaker

e Subwoofer











Connect Audio

cables to terminals

corresponding to

the speakers you

have connected.

Back of the unit

Multi channel speakers

Amplifier/receiver

NOTE

Getting started

DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 9 ページ２００９年２月６日　金曜日　午後５時２２分

RQT9401

F Connecting to 5.1ch AUDIO OUT terminal [BD80]

When connected to a compatible amplifier/receiver using the 5.1ch AUDIO OUT terminals, you can enjoy surround sound.

NECESSARY SETTINGS

≥“Analog Audio Output”: “2ch (Downmix) +

5.1ch” ( 31)

≥7.1 channel disc is mixed down to 5.1

channel audio.

≥Enjoying High Bit rate Audio with 7.1ch

speaker and 5.1ch speaker ( 20)

When connecting amplifier/receiver or

other devices with HDMI AV OUT terminal

≥“HDMI Audio Output” : “Off” ( 31)

(Otherwise, depending on the

specifications of connected devices, the

audio from AUDIO OUT terminal may be

output as two channels only.)

When connecting a television with HDMI

AV OUT terminal ( 8, A).

≥“HDMI Audio Output” : “Off” ( 31)

(Otherwise, the sound may not be output

with the desired audio.)

≥Depending on how the disc was recorded,

the audio may not be output properly on

the number of channels desired.

Cable connections

a Front speaker (L/R)

b Surround speaker (L/R)

c Center speaker

d Subwoofer









Connect Audio

cables to

terminals

corresponding to

the speakers you

have connected.

Back of the unit

Amplifier/receiver

Multi channel speakers

NOTE

G Connecting to DIGITAL AUDIO OUT terminal

You can enjoy surround sound, when connected to an amplifier/receiver using the COAXIAL ([BD80]) or OPTICAL terminal.

With COAXIAL ([BD80]) or OPTICAL

NECESSARY SETTINGS

≥“Digital Audio Output” : Depending on the

connected amplifier/receiver ( 30)

When connecting a television with HDMI

AV OUT terminal ( 8, A).

≥“HDMI Audio Output” : “Off” ( 31)

(Otherwise, the sound may not be output

with the desired audio.)

COAXIAL IN

OPTICAL IN

Back of the unit

Coaxial cable

Amplifier/receiver

Optical digital audio cable

NOTE

Connecting AC mains lead

Connect only after all other connections

are complete.

Conserving power

This unit consumes a small amount of power

even when it is turned off (“Quick Start”: “Off”,

less than 0.5 W). To save power when the

unit is not to be used for a long time, unplug it

from the household mains socket.

Back of the unit

AC mains lead (included)

Cooling fan

To a household mains socket

(AC 220 to 240 V, 50 Hz)

NOTE

TIPS

DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 10 ページ２００９年２月６日　金曜日　午後５時２２分

RQT9401

Sound Page

HDMI connections

Card

USB

No sound.

Low volume.

Distorted sound.

Cannot hear the desired audio

type.

≥Check the connections and the “Digital Audio Output” settings. Check the input mode on the

amplifier/receiver if you have connected one.

≥Press [AUDIO] to select the audio.

≥Turn off “V. Surround” in the following cases.

– When using discs that do not have surround sound effects such as Karaoke discs.

– When playing bilingual broadcast programs.

≥[BD80] When the unit is connected to an amplifier/receiver with the AUDIO OUT terminal, set

“Analog Audio Output” and match multi channel speaker settings. If these are not set

properly, the audio is not output correctly.

≥[BD80] When connected to an amplifier/receiver or any other devices using both AUDIO OUT

terminal and HDMI AV OUT terminal, the audio from AUDIO OUT terminal may not be output

with the desired audio depending on the specifications of the connected devices, etc. Set

“HDMI Audio Output” to “Off”, when you output multi-channel surround sound from AUDIO

OUT terminal.

≥The sound effects (Re-master, V. Surround, etc.) will not work when the bitstream signal is

output from the HDMI AV OUT terminal or the DIGITAL AUDIO OUT terminal.

≥[DivX] Audio may not be output depending on how files were created.

8–10, 30

31, 33

—

Cannot switch audio. ≥There are discs for which audio cannot be changed because of how the disc was created.

≥When connecting an amplifier/receiver using a coaxial cable ([BD80]), optical digital audio

cable or an HDMI cable, you cannot switch the audio if “Dolby D/Dolby D +/Dolby TrueHD” or

“DTS/DTS-HD” is set to “Bitstream”. Set “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/

DTS-HD” to “PCM” or connect using AUDIO OUT terminal.

—

9, 10, 30

The images from this unit do

not appear on the television.

Picture is distorted.

Jittering occurs.

≥

An incorrect resolution is selected in “HDMI Video Format”, when the television is connected to

HDMI

AV OUT

terminals. While stopped, press and hold [

∫

]

and [

](PLAY)

on the main unit at the same

time for more than 5 seconds to cancel this setting. Set the item again.

However, Dolby Digital Plus,

Dolby TrueHD, and DTS-HD audio are not output in bitstream. To output the bitstream, select

“Default Settings” to restore the factory presets and make proper settings.

≥To output video from a device connected with an HDMI cable, set “HDMI Video Mode” to “On”

in the Setup menu.

≥Picture may not be seen when more than 4 devices are connected with HDMI cables.

Reduce the number of connected devices.

≥When “24p Output” is set to “On”, HDMI authentication takes place where 24p images switch

to other images, and a black screen is displayed.

≥When “24p Output” is set to “On”, jittering may occur while playing DVD-Video. In this case,

turn “24p Output” to “Off”.

—

The 4:3 aspect ratio picture

expands left and right.

Screen size is wrong.

≥Change “TV Aspect” type to “16:9”.

When playing DVD-Video using

progressive output, one part of

the picture momentarily

appears to be doubled up.

≥When you use the HDMI AV OUT terminal for video output, follow the steps below for setting.

1 Connect this unit to the TV with any cable except the HDMI cable.

2 When you connect with the Component Video cable, set “HDMI Video Mode” to “Off” and

“Component Resolution” to “576i/480i” in the Setup menu.

No sound.

Low volume.

Distorted sound.

Cannot hear the desired audio

type.

≥Audio may not be heard when more than 4 devices are connected with HDMI cables.

Reduce the number of connected devices.

≥The sound effects will not work when the bitstream signal is output from the HDMI AV OUT

terminal or the DIGITAL AUDIO OUT terminal.

≥To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to

“On” in the Setup menu.

≥Depending on the connected equipment, the sound may be distorted if this unit is connected

with an HDMI cable.

≥When “BD-Video Secondary Audio” is set to “On”, Dolby Digital Plus, Dolby TrueHD, and

DTS-HD are converted to 48 kHz Dolby Digital or DTS Digital Surround and output. LPCM

7.1 channel audio is converted to 5.1 channel audio. In this case, set the “BD-Video

Secondary Audio” to “Off”.

—

The capacity of the SD card

decreased.

≥When a BD-Video that supports the BD-Live is used, and an SD card is in the slot, data may

be written to the SD card. Erase the data by using “BD-Video Data Erase”, format the card or

use a new card.

Music on an SD card cannot be

played.

≥Data that can be played from an SD card are AVCHD, MPEG2 and JPEG data. 7

The contents of the card

cannot be read.

≥The card is not compatible or the contents on the card may be damaged.

≥Turn off and then turn on the unit again.

—

The contents of the USB device

cannot be read.

≥Remove the USB device from the USB port and then insert again. If this does not solve the

problem, turn off and turn on the unit again.

≥Check that the USB device is inserted correctly.

≥The format of the USB device or of its contents is not compatible with the unit. (The contents

on the USB device may be damaged.)

≥The USB device contains a folder structure and/or file extensions that are not compatible with

this unit.

≥Turn off and then turn on the unit again.

≥USB memories connected using a USB extension cable or a USB hub may not be

recognized by this unit.

≥Some USB devices cannot be used with this unit.

≥If inserted during playback the USB device may not be recognized by this unit.

—

USB device cannot be

operated.

≥Turn the power of this unit off once, and turn it back on.

DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 40 ページ２００９年２月６日　金曜日　午後５時２２分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMPBD80 in the language / languages: English as an attachment in your email.

The manual is 9,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMPBD80

Panasonic DMPBD80 User Manual - English - 2 pages

Panasonic DMPBD80 User Manual - German - 132 pages

Panasonic DMPBD80 User Manual - German - 2 pages

Panasonic DMPBD80 User Manual - Dutch - 104 pages

Panasonic DMPBD80 User Manual - Dutch, Danish - 2 pages

Panasonic DMPBD80 User Manual - French - 44 pages

Panasonic DMPBD80 User Manual - French - 2 pages

Panasonic DMPBD80 User Manual - Italian - 132 pages

Panasonic DMPBD80 User Manual - Italian - 2 pages

Panasonic DMPBD80 User Manual - Polish - 48 pages

Panasonic DMPBD80 User Manual - Swedish - 104 pages

Panasonic DMPBD80 User Manual - Swedish - 2 pages

Panasonic DMPBD80 User Manual - Spanish, Spanish - 132 pages

Panasonic DMPBD80 User Manual - Spanish - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic DMPBD80 Manual

Product: