602973
30
Zoom out
Zoom in
Previous page
1/48
Next page
30
RQT9401
“Sound”
Dynamic Range Compression [BD-V] [AVCHD] [DVD-V] [DivX]
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
Change the dynamic range ( 42) for late night viewing.
On Off
Auto: Effective only when Dolby TrueHD is played.
Digital Audio Output ( 20)
Press [OK] to show the following settings.
Dolby D/Dolby D +/
Dolby TrueHD
Select whether Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS
Digital Surround, DTS-HD High
Resolution Audio or DTS-HD Master
Audio is output in “Bitstream” or
“PCM” format.
[Note]
Not making the proper settings may
result in noise.
If the unit is connected with the HDMI AV
OUT terminal, the specifications of the
connected equipment take preference
over this unit and audio selected in these
items may not be output (e.g., when a
television is connected, the HDMI audio
output of this unit is limited to
down-mixed 2ch.)
Bitstream:
Select “Bitstream” when the connected equipment can decode the
respective audio format.
Connect equipment supporting HDMI (High Bit rate Audio) and use a
High Speed HDMI Cable in order to output high bit rate audio such as
Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio or
DTS-HD Master Audio.
PCM:
Select “PCM” when the connected equipment cannot decode the
respective audio format.
Refer to the operating instructions for connected devices to verify whether
or not they can decode each of the audio formats.
DTS/DTS-HD
MPEG Audio Bitstream: When connected to equipment with a built-in MPEG
decoder.
PCM
: When connected to equipment without a built-in MPEG
decoder.
BD-Video Secondary Audio [BD-V]
Turn on/off the clicking sound on the menu and audio with
secondary video in picture-in-picture mode. ( 19)
On
: The primary audio and secondary audio are mixed and output.
The sampling frequency is converted to 48 kHz.
Off: The clicking sound on the menu and secondary audio are not
output.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz.
Signals are converted to 48 kHz despite the settings across in the
following cases:
when the signals have a sampling frequency of 192 kHz
when the disc has copy protection
when “BD-Video Secondary Audio” is set to “On”
On: Signals are converted to 48 kHz. (Choose when the connected
equipment cannot process signals with sampling frequency of
96 kHz.)
Off
: Signals are output as 96 kHz. (Choose when the connected
equipment can process signals with sampling frequency of
96 kHz.)
Downmix
Switch the downmix system for playing back multi-channel
surround sound.
When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is set
to “Bitstream”, there are no downmix effects for the outputted
audio.
The audio will be outputted in “Stereo” in the following cases.
AVCHD playback
Playback of clicking sound on the menu and audio with
secondary video in picture-in-picture mode
Stereo
: When connected to equipment that does not support
the virtual surround function.
Surround encoded: When connected to equipment that supports the
virtual surround function.
High Clarity Sound [BD80]
When the analog video terminal is not being used, the electrical
current that flows through the analog video circuit can be stopped.
This prevents adverse effects on the audio signals and produces
clearer sound.
Set to “Enable” and then set “High Clarity Sound” on the
on-screen menu to “On”. ( 27)
Use this when outputting image via HDMI terminal. Analog image
will not be output via COMPONENT VIDEO OUT terminal or
VIDEO OUT terminal.
Enable Disable
“Display”
On-Screen Messages
Choose whether to show status messages automatically.
Automatic Off
On-Screen Language
Choose the language for these menus and on-screen messages.
English
Français Español
Deutsch Italiano Nederlands
Screen Saver Function
This is to prevent burn-in on the screen.
When this is set to “On”, the masked-off area on the screen
becomes gray.
[Only when connecting with an HDMI cable or a component
video cable and “HDMI Video Format” ( 31) is set to any other
mode than “576p/480p”, or “Component Resolution” ( 31) is
set to “720p” or “1080i”]
On
:
If there is no operation for 10 minutes or more, the displayed screen
switches to the other states automatically.
When the Direct Navigator or FUNCTIONS menu is displayed, the
display returns to the screen saver mode.
When CD or MP3 is played, the display returns to the screen saver
mode. (Playback continues.)
When still pictures are shown (except for slideshow), the display returns
to the Direct Navigator screen.
Off
FL Display
Changes the brightness of the unit’s display.
Bright
Dim: The display is dimmed.
Automatic: The display is dimmed during playback and bright
except playback.
[BD80]
SD Card LED Control
Set the lighting method for the lamp on the SD card slot.
On
Off
SD inserted: When this unit is turned on and SD card is inserted, the
lamp is lighted.
Software Licence Information about the software used by this unit is displayed.
DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 30 ページ 2009年2月6日 金曜日 午後5時22分
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMPBD80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMPBD80 in the language / languages: English as an attachment in your email.

The manual is 9,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMPBD80

Panasonic DMPBD80 User Manual - English - 2 pages

Panasonic DMPBD80 User Manual - German - 132 pages

Panasonic DMPBD80 User Manual - German - 2 pages

Panasonic DMPBD80 User Manual - Dutch - 104 pages

Panasonic DMPBD80 User Manual - Dutch, Danish - 2 pages

Panasonic DMPBD80 User Manual - French - 44 pages

Panasonic DMPBD80 User Manual - French - 2 pages

Panasonic DMPBD80 User Manual - Italian - 132 pages

Panasonic DMPBD80 User Manual - Italian - 2 pages

Panasonic DMPBD80 User Manual - Polish - 48 pages

Panasonic DMPBD80 User Manual - Swedish - 104 pages

Panasonic DMPBD80 User Manual - Swedish - 2 pages

Panasonic DMPBD80 User Manual - Spanish, Spanish - 132 pages

Panasonic DMPBD80 User Manual - Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info