602954
27
Zoom out
Zoom in
Previous page
1/40
Next page
27
VQT2J95
Settings
Still Mode
Select the type of picture shown when you pause playback.
Seamless Play
The chapters segment in playlists are played seamlessly.
Select “On”, when the picture freezes for a moment at the
chapters segment in playlists.
NTSC Contents Output
Select PAL60 or NTSC output when playing NTSC discs.
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
“Auto” is effective only when playing Dolby TrueHD.
Digital Audio Output (> 33)
Press [OK] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of
96 kHz for the PCM output from the DIGITAL AUDIO OUT.
If “On” is selected, the signals that are converted to 48 kHz
are output.
If “Off” is selected, and the connected equipment does not
support 96 kHz, the sound will not be output normally.
Signals are converted to 48 kHz despite the settings across
in the following cases:
when the signals have a sampling frequency of 192 kHz
when the disc has copy protection
when “BD-Video Secondary Audio” is set to “On”
Downmix
Select the downmix system of multi-channel to 2-channels
sound.
Select “Surround encoded”, when the connected equipment
supports the virtual surround function.
There is no effect on “Bitstream” via HDMI AV OUT and
DIGITAL AUDIO OUT.
The audio will be output in “Stereo” in the following cases.
AVCHD playback
Playback of secondary audio (including the button click
sound).
7.1ch Audio Reformatting [BD65]
Surround sound with 6.1ch or less is automatically expanded
and played back at 7.1ch.
If “Off” is selected, sound is played over the original number
of channels.
(Note that in the case of 6.1ch audio, playback will be at
5.1ch.)
Audio reformatting is enabled in the following cases:
When you have selected “PCM” in “Digital Audio Output”.
When the audio is Dolby Digital, Dolby Digital Plus, Dolby
TrueHD or LPCM.
On-Screen Messages
Choose whether to show status messages automatically.
On-Screen Language
Choose the language for these menus and on-screen
messages.
Screen Saver Function
This is to prevent burn-in on the screen.
When this is set to “On”:
If there is no operation for 10 minutes or more, DIRECT
NAVIGATOR screen switches to FUNCTION screen
automatically.
While playing and pausing, etc., this function is not
available.
As for Music [CD-DA] or MP3, regardless of the setting, if
there is no operation for a while, DIRECT NAVIGATOR
screen switches to the other states automatically.
FL Display
Changes the brightness of the unit’s display.
If “Automatic” is selected the display is dimmed during
playback and bright except during playback.
Software Licence
Information about the software used by this unit is displayed.
Picture
Automatic
Automatically selects the type of picture shown.
Field
Select if jittering occurs when “Automatic” is
selected.
Frame
Select if small text or fine patterns cannot be
seen clearly when “Automatic” is selected.
Sound
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
MPEG Audio
Select the audio signal to output
.
Select “PCM”, when the connected equipment cannot
decode the respective audio format.
Not making the proper settings may result in noise.
BD-Video Secondary Audio
Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound). (> 18)
If “Off” is selected, the unit outputs the primary audio only.
Display
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMPBD45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMPBD45 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMPBD45

Panasonic DMPBD45 User Manual - English - 40 pages

Panasonic DMPBD45 User Manual - English - 112 pages

Panasonic DMPBD45 User Manual - German - 40 pages

Panasonic DMPBD45 User Manual - Dutch - 112 pages

Panasonic DMPBD45 User Manual - Dutch - 40 pages

Panasonic DMPBD45 User Manual - Danish - 112 pages

Panasonic DMPBD45 User Manual - French - 40 pages

Panasonic DMPBD45 User Manual - French - 40 pages

Panasonic DMPBD45 User Manual - French, Italian, Polish, Swedish - 112 pages

Panasonic DMPBD45 User Manual - Turkish - 44 pages

Panasonic DMPBD45 User Manual - Spanish, Finnish - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info