602954
13
Zoom out
Zoom in
Previous page
1/40
Next page
13
VQT2J95
Connections and settings
Access Point Connection Setting
Network Easy Setting (Connection Test)
Network Easy Setting (Internet Connection Test)
Refer to the operating instructions of the hub or router.
You can perform this setup anytime by selecting “Network Easy Setting” in
the Setup menu. (> 29)
You can redo these settings individually using “Network Settings”. (> 29)
Do not connect to a wireless network for which you do not have usage rights.
Wireless networks for which you do not have usage rights (SSID
*
2
) may
appear during the automatic search for a wireless network environment.
However, if you connect, there is a risk that it will be regarded as illegal
access.
After performing network settings on this unit, the settings (encryption
level, etc.) of the Wireless router (Access point) might change.
When you have trouble getting online on your PC, perform the network
settings on your PC in accordance with the settings of Wireless router
(Access point).
*2
This is a name given to identify specific networks among wireless LANs.
When the SSID is the same in two devices, data can be transmitted
between them.
When you experience
problems with settings
Display Check the following
A conflict with another device
occurred.
Please wait a few moments,
and then try again.
A time out error occurred. Setting of the Wireless
router (Access point) for
MAC Address etc.
The signal may be weak.
Using the USB extension
cable supplied with the
Wireless LAN Adaptor,
adjust the position of the
Wireless LAN Adaptor.
The SSID*
2
and the
encryption key of the
Wireless router (Access
point).
Please wait a few
moments, and then try
again.
An authentication error or a
time out error occurred.
A device error occurred.
Connection of Wireless
LAN Adaptor
If there is no improvement
in symptom, consult your
dealer.
Display
Check the
following
1. LAN cable connection or
Connection to access point
:Fail
Connection
of the LAN
cables
(> 10)
2. IP address setting :Fail
3. Connection to gateway :Fail
OK
Access Point Connection Setting
Failed to connect to the access point.
A conflict with other devices occurred.
Do you wish to setup Access Point
Connection Setting again ?
Yes No
OK
Network Easy Setting (Connection Test)
Yes No
Complete.
1. LAN cable connection
2. IP address setting
3. Connection to gateway
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again.
Select “No” and press [OK] to finish Network
Easy Setting.
: Fail
: Fail
: Fail
1. LAN cable connection or
Connection to access point
:Pass
Connection
and settings
of the hub
and router
Settings of
IP Address /
DNS Settings
(> 29)
2. IP address setting :Fail
3. Connection to gateway :Fail
1. LAN cable connection or
Connection to access point
:Pass
2. IP address setting :Pass
3. Connection to gateway :Fail
Display Check the following
Cannot find the server.
(B019)
“Primary DNS” and “Secondary
DNS” settings of “IP Address /
DNS Settings” (> 29)
Failed to connect to
the server.
(B020)
The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
Settings of “Proxy Server
Settings” (> 29) and the router
OK
Network Easy Setting (Internet Connection Test)
Complete.
- Connection to the Internet : Fail(B019)
Failed the connection test.
Cannot find the server.(B019)
Please refer to the operating instructions for the cause
of the error and the solution for it.
Press [OK].
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMPBD45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMPBD45 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMPBD45

Panasonic DMPBD45 User Manual - English - 40 pages

Panasonic DMPBD45 User Manual - English - 112 pages

Panasonic DMPBD45 User Manual - German - 40 pages

Panasonic DMPBD45 User Manual - Dutch - 112 pages

Panasonic DMPBD45 User Manual - Dutch - 40 pages

Panasonic DMPBD45 User Manual - Danish - 112 pages

Panasonic DMPBD45 User Manual - French - 40 pages

Panasonic DMPBD45 User Manual - French - 40 pages

Panasonic DMPBD45 User Manual - French, Italian, Polish, Swedish - 112 pages

Panasonic DMPBD45 User Manual - Turkish - 44 pages

Panasonic DMPBD45 User Manual - Spanish, Finnish - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info