Manual Panasonic DMP-BDT100 (page 29 of 320) (German, Dutch, Danish, French, Italian, Swedish, Spanish, Spanish)

452159

Zoom out

Zoom in

1/320

VQT2U34

ENGLISH

Dynamic Range Compression

You can listen at low volumes but still hear dialog clearly.

(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)

≥ “Auto” is effective only when playing Dolby TrueHD.

Digital Audio Output (> 36)

Press [OK] to show the following settings.

PCM Down Conversion

Select how to output audio with a sampling frequency of

96 kHz for the PCM output from the DIGITAL AUDIO OUT.

≥ If “On” is selected, the signals that are converted to

48 kHz are output.

≥ If “Off” is selected, and the connected equipment does not

support 96 kHz, the sound will not be output normally.

≥ Signals are converted to 48 kHz despite the settings in the

following cases:

– when the signals have a sampling frequency of 192 kHz

– when the disc has copy protection

– when “BD-Video Secondary Audio” is set to “On”

Downmix

Select the downmix system of multi-channel to 2-channels

sound.

≥ Select “Surround encoded”, when the connected

equipment supports the virtual surround function.

≥ There is no effect on “Bitstream” via HDMI AV OUT and

DIGITAL AUDIO OUT.

≥ The audio will be output in “Stereo” in the following cases.

– AVCHD playback

– Playback of secondary audio (including the button click

sound).

7.1ch Audio Reformatting

Surround sound with 6.1ch or less is automatically

expanded and played back at 7.1ch.

≥ If “Off” is selected, sound is played over the original

number of channels.

(Note that in the case of 6.1ch audio, playback will be at

5.1ch.)

Audio reformatting is enabled in the following cases:

≥ When you have selected “PCM” in “Digital Audio Output”.

≥ When the audio is Dolby Digital, Dolby Digital Plus, Dolby

TrueHD or LPCM.

Audio Delay

Synchronization between picture and sound is corrected by

adjusting the delay time of the audio output.

On-Screen Messages

Choose whether to show status messages automatically.

On-Screen Language

Choose the language for menus and on-screen messages.

Screen Saver Function

This is to prevent burn-in on the screen.

≥ When this is set to “On”:

If there is no operation for 10 minutes or more, DIRECT

NAVIGATOR screen switches to FUNCTION screen

automatically.

≥ While playing and pausing, etc., this function is not

available.

≥ While playing music (CD-DA or MP3), after about

2 minutes DIRECT NAVIGATOR screen switches to a

blank screen with “Screen Saver” message.

FL Display

Changes the brightness of the unit’s display.

≥ If “Automatic” is selected the display is dimmed during

playback and bright except during playback.

Software Licence

Information about the software used by this unit is displayed.

Sound

Dolby D/Dolby D +/Dolby TrueHD

DTS/DTS-HD

MPEG Audio

Select the audio signal to output

≥ Select “PCM”, when the connected equipment cannot

decode the respective audio format.

≥ Not making the proper settings may result in noise.

BD-Video Secondary Audio

Select whether to mix or not mix the primary audio and

secondary audio (including the button click sound). (> 18)

≥ If “Off” is selected, the unit outputs the primary audio

only.

Display

(29)

DMP-BDT100EG-VQT2U34.book 29 ページ２０１０年６月２２日　火曜日　午前１１時０分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMP-BDT100 in the language / languages: German, Dutch, Danish, French, Italian, Swedish, Spanish, Spanish as an attachment in your email.

The manual is 10,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMP-BDT100

Panasonic DMP-BDT100 User Manual - Turkish - 48 pages

Panasonic DMP-BDT100 User Manual - Finnish - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic DMP-BDT100 Manual

Product: