Manual Panasonic DMP-BDT100 (page 13 of 320) (German, Dutch, Danish, French, Italian, Swedish, Spanish, Spanish)

452159

Zoom out

Zoom in

1/320

VQT2U34

ENGLISH

Search for access point:

Available Wireless routers (Access points) are searched and

listed. You can select the one to use from the list.

1 Press [3, 4] to select SSID*

of Wireless router

(Access point) you want to connect with. Then press

[OPTION] to show information of the selected router,

make a note of the authentication and encryption type.

≥ If you can not find the SSID*

, select “Search again”.

2 Press [RETURN] and then press [OK].

Then select an item on the following screen which

corresponds to the authentication type noted down in

step 1 above.

Follow the on-screen instructions to make the settings.

≥ Input your encryption key code in “Encryption Key”

supplied with your Wireless router (Access point).

Wi-Fi Protected Setup-compatible Wireless router (Access point) may

have the mark.

An SSID (Service Set IDentification) is a name used by wireless LAN to

identify a particular network. Transmission is possible if the SSID

matches for both devices.

Access Point Connection Setting

Network Easy Setting (Connection Test)

When you experience

problems with settings

Access Point Connection Setting

Reception

Select an access point to connect with.

To search for access point again, please

select "Search again" below.

SSID

XXXXXXXXXX

Search again

SSID

Wireless type

Authentication type

Encryption type

:XXXXXXXXXXXXXXX

:802.11n/g/b (2.4GHz)

:WPA-PSK

:AES

Access Point Connection Setting

WPA2-PSK (AES/TKIP)

WPA-PSK (AES/TKIP)

Open/Shared Key (WEP)

Open system

Select authentication type.

Access Point Connection Setting

Yes No

Failed to connect to the access point.

A conflict with other devices occurred.

Do you wish to setup Access Point

Connection Setting again ?

Display Check the following

A conflict with other

devices occurred.

≥ Please wait a few moments,

and then try again.

A time out error

occurred.

≥

Setting of the Wireless router

(Access point) for MAC Address

etc.

≥ The signal may be weak. Using

the USB extension cable

supplied with the Wireless LAN

Adaptor, adjust the position of

the Wireless LAN Adaptor.

≥ The SSID and the encryption

key of the Wireless router

(Access point).

≥ Please wait a few moments,

and then try again.

An authentication error

or a time out error

occurred.

A device error

occurred.

≥ Connection of Wireless LAN

Adaptor

If there is no improvement in

symptom, consult your dealer.

Display

Check the

following

1. LAN cable connection or

Connection to access point

:Fail

≥ Connection

of the LAN

cables

(> 11)

2. IP address setting :Fail

3. Connection to gateway :Fail

1. LAN cable connection or

Connection to access point

:Pass

≥ Connection

and settings

of the hub

and router

≥ Settings of

“IP Address /

DNS

Settings”

(> 31)

2. IP address setting :Fail

3. Connection to gateway :Fail

1. LAN cable connection or

Connection to access point

:Pass

2. IP address setting

:Home

network

available

3. Connection to gateway :Fail

1. LAN cable connection or

Connection to access point

:Pass

2. IP address setting :Pass

3. Connection to gateway :Fail

Network Easy Setting (Connection Test)

Yes No

Complete.

1. LAN cable connection

2. IP address setting

3. Connection to gateway

LAN cable is not connected.

Please check the connection.

Select “Yes” and press [OK] to check network

connection again.

Select “No” and press [OK] to finish Network

Easy Setting.

: Fail

(13)

DMP-BDT100EG-VQT2U34.book 13 ページ２０１０年６月２２日　火曜日　午前１１時０分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMP-BDT100 in the language / languages: German, Dutch, Danish, French, Italian, Swedish, Spanish, Spanish as an attachment in your email.

The manual is 10,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMP-BDT100

Panasonic DMP-BDT100 User Manual - Turkish - 48 pages

Panasonic DMP-BDT100 User Manual - Finnish - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic DMP-BDT100 Manual

Product: