572966
40
Zoom out
Zoom in
Previous page
1/52
Next page
RQT9378
40
Messages
The following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup and use.
On the television Page
Authorization Error
This unit is not authorized
to play this title.
[DivX]: You are trying to play the DivX VOD content that was purchased with a
different registration code. You cannot play the content on this unit.
26
Cannot play. You inserted an incompatible disc (Discs recorded in PAL video, etc.). 6, 7
Cannot display on this unit. You tried to play a non-compatible image.
Confirm “SD” on the unit’s display is not blinking and re-insert the card.
7, 38
No disc is inserted. The disc may be upside down.
Rental Expired. [DivX]: The DivX VOD content has zero remaining plays. You cannot play it. 26
$ This operation is not
available.
Some operations are unsupported by the unit. For example;
[BD-V]
: During playback, reverse slow-motion or reverse frame-by-frame is not possible.
20
$ This operation is
prohibited by this disc.
Depending on the disc, you may not be able to perform search or skip when film
previews and warning screens are being played back.
20
Cannot connect.
Please check the
connection of the LAN
cable.
When a hub is used but its Link lamp does not light up, check the cable
connection, LAN terminal connection, cable itself (a cross over cable may be
used by mistake), etc.
16
IP address is not set. The “IP Address” in “IP Address/DNS Settings” is “---. ---. ---. ---”. Set the “IP
Address”, “Subnet Mask”, and “Default Gateway”. (Select the automatic address
acquisition if necessary.)
17
Cannot obtain IP address
using DHCP.
Please check the
connection or router
settings.
If you use a hub, then check the connection between the hub and the router.
–Use the UPLINK port of the hub to connect to a router.
–Check whether or not the hub’s Link lamp lights up. If it does not light up, then
check the cable connection, LAN terminal connection, cable itself (a cross over
cable may be used by mistake), etc.
If the above conditions are OK, then the router may not operate in DHCP mode.
Check the router settings and operation. You may reset the router to restore it to
normal.
16
16
This IP address is already in
use.
Please check the IP address
setting.
This unit’s IP address is used by another device. Check the IP addresses of this
unit, personal computers, and routers, etc. If necessary, reconfigure them to
avoid IP addresses from being duplicated.
Unable to perform
Connection Test.
Please try again.
Turn the unit off. Remove the power cord and reconnect it and try again. If the
same symptom persists, then consult your dealer.
IP address not set correctly.
Connection Test was
unsuccessful. No reply
from host.
Please check the
connection or router
settings.
If you use a hub, then check the connection between the hub and the router.
–Use the UPLINK port of the hub to connect to a router.
–If the hub’s Link lamp does not light up, then check the cable connection, LAN
terminal connection, cable itself (a cross over cable may have been used by
mistake), etc.
Check the “IP Address”, “Subnet Mask”, and “Default Gateway” in the “IP
Address/DNS Settings”.
If the MAC address information is required, then press [SETUP] to display the
“Network” menu.
16
17
17, 35
Network connection
refused.
Please confirm Setup
“BD-Live Internet Access.”
When you set “BD-Live Internet Access” to “Allow (Limited)” and play BD-Live
contents which do not have a content owner certificate, the Internet access of the
content is not allowed. If you allow the content to connect to Internet, set “BD-Live
Internet Access” to “Allow (ALL)”.
32
Unable to check for latest
firmware version.
Please try again later.
The firmware download server is currently unavailable. Please try again later.
High Clarity Sound is
effective.
Analog video output is
turned off when
playback starts.
“High Clarity Sound” in setup menu is set to “Enable”, and “High Clarity Sound” in
on-screen menu is set to “On”.
31, 33
RQT9378~Body_mst.fm 40 ページ 2008年12月25日 木曜日 午後3時23分
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMP-BD605 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMP-BD605 in the language / languages: English as an attachment in your email.

The manual is 11,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info