502343
41
Zoom out
Zoom in
Previous page
1/52
Next page
RQT9378
41
On the unit’s display Page
F99 The unit fails to operate properly. Press [POWER Í/I] on the main unit to switch
the unit to standby for 3 seconds. Now press [POWER Í/I] on the main unit
again to turn the unit on.
HDMI ONLY Some BD-Video discs can only be output with HDMI.
NET Displays while VIERA CAST is starting up.
No PLAY There is a viewing restriction on a BD-Video or DVD-Video. 32
No READ The media is dirty or badly scratched. The unit cannot play.
PLEASE WAIT The unit is carrying out internal process. This is not a malfunction. You cannot
operate the unit while “PLEASE WAIT” is displayed.
When connected to TV(VIERA) with HDAVI Control 4, and power supply is turned
off by the “Auto power stand-by” function on the TV side.
REMOVE The USB device is drawing too much power. Remove the USB device. 19
SET
(“ stands for a number.)
The remote control and main unit are using different codes. Change the code on
the remote control.
Press and hold [OK] and the indicated number button at the
same time for more than 5 seconds.
36
UNFORMAT You inserted an unformatted DVD-RAM, DVD-RW, +RW, an unused +R, +R DL
or DVD-RW (DVD-Video format).
UNSUPPORT You have inserted a media the unit cannot play.
You tried to operate with a non-compatible USB device.
6, 7
7
U59 The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until
the message disappears.
Select a position with good ventilation when installing the unit. Do not block the
cooling fan on the rear of the unit.
U72
U73
The HDMI connection acts unusually.
–The connected equipment is not HDMI compatible.
–Please use HDMI cables that have the HDMI logo (as shown on the cover).
–The HDMI cable is damaged.
H or F There is something unusual. (The service number displayed after H and F
depends on the unit’s condition.)
Check the unit using the troubleshooting guide. If the service number does not
disappear, do the following.
1 Disconnect the plug from the AC outlet, wait a few seconds, then reconnect it.
2 Press [POWER Í/I] to turn the power on. (The unit may be fixed.)
If the service number does not disappear despite doing the above, request
service from the dealer. Inform the dealer of the service number when requesting
service.
42–44
START The system is being restarted during the firmware update. Please do not turn off
power.
16
UPD/ The firmware is being updated. 16
FINISH The firmware update is complete. 16
Reference
RQT9378~Body_mst.fm 41 ページ 2008年12月25日 木曜日 午後3時24分
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMP-BD60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMP-BD60 in the language / languages: English as an attachment in your email.

The manual is 11,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMP-BD60

Panasonic DMP-BD60 User Manual - German - 132 pages

Panasonic DMP-BD60 User Manual - Dutch - 104 pages

Panasonic DMP-BD60 User Manual - Italian - 132 pages

Panasonic DMP-BD60 User Manual - Swedish - 104 pages

Panasonic DMP-BD60 User Manual - Spanish, Spanish - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info