502343
37
Zoom out
Zoom in
Previous page
1/52
Next page
RQT9378
37
Changing the speaker setting to suit your speakers [BD80]
When connecting to an amplifier/receiver to enjoy multi-channel surround sound, use the following settings on this unit if they cannot be set on the
amplifier/receiver.
The settings are effective when connecting to analog 7.1ch/5.1ch AUDIO OUT terminal.
Preparation
1 Set “Analog Audio Output” to “2ch (Downmix) + 5.1ch” or “7.1ch”.
(> 34)
A message is displayed.
2 Press [OK].
* Surround back channel is enabled only when setting “Analog Audio
Output” to “7.1ch”.
Speaker presence and size ( )
Set all the connected speakers individually.
1 Press [3, 4, 2, 1] to select the speaker icon and press [OK].
2 Press [3, 4] to select the setting and press [OK].
Icon examples:
Surround speaker (LS)
Large: Select when the speaker supports low-frequency
(under 100 Hz) reproduction.
Small: Select when the speaker does not support
low-frequency reproduction.
In order to make an ideal listening environment, settings of speaker
sizes may be automatically adjusted.
For example, if the subwoofer is set to “No”, the front speakers will
automatically be set to “Large”. (In this case, we recommend
connecting a speaker that can reproduce bass below 100 Hz.)
Delay time ( )
For optimum listening with 7.1/5.1-channel sound, all the speakers,
except for the subwoofer, should be the same distance from the
seating position.
If you have to place the center, surround and surround back speakers
closer to the seating position, adjust the delay time to make up for the
difference.
If either distance A or C is less than B (D right), find the difference
in the relevant table and change to the recommended setting.
1 Press [3, 4, 2, 1] to select the delay time box ( ) and press
[OK].
2 Press [3, 4] to select the setting and press [OK].
: Actual speaker position
: Ideal speaker position
A B C : Primary listening distance
Channel balance ( )
1 Select “Test” and press [OK].
A test signal is output.
Front (L)_—)Center (C)_—)Front (R)_—)Surround (RS)
: ;
Surround (LS)(— Surround Back (LB) (— Surround Back (RB)
2 While listening to the test signal, press [3, 4] to adjust the
volume of each speaker
Front speakers: 0.0 to s6.0 dB
Center and surround speakers: 0.0 to s12.0 dB
3 Press [OK].
The test signal stops.
No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to suit your taste.
To finish the speaker setting
Press [3, 4, 2, 1] to select “Complete” and press [OK].
ms
ms
L
Complete
Test
LS
R
SW
RS
dB
dB
dB
dB
dBdB
LB RB
0.00.0
0.0
0.0
0.0
0.0 0.00.0
ms dBdB
0.0 0.00.0
C
Subwoofer (SW)
Front (R)
Center (C)
Front (L)
Complete
(LS)
Surround
(RS)
Surround back
Test
(RB)* (LB)
L
LS
R
SW
RS
LB RB
C
LS
LS
NoLarge Small
ms
0.0
ms
0.0
A Center speaker
Difference Setting
Approx. 34 cm (1 ft. 1 in.) 1.0 ms
Approx. 68 cm (2 ft. 2 in.) 2.0 ms
Approx. 102 cm (3 ft. 4 in.) 3.0 ms
Approx. 136 cm (4 ft. 5 in.) 4.0 ms
Approx. 170 cm (5 ft. 6 in.) 5.0 ms
C Surround/Surround back speakers
Difference Setting
Approx. 170 cm (5 ft. 6 in.) 5.0 ms
Approx. 340 cm (11 ft. 1 in.) 10.0 ms
Approx. 510 cm (16 ft. 8 in.) 15.0 ms
L
LS
R
SW
C
RS
C
RS
LS
A
B
C
L
LB
R
RS
SW
C
RB
C
RB
RSLS
LB
A
B
C
C
LS
Approximate room dimensions
Circle of constant primary listening distance
5.1ch speaker connection
7.1ch speaker connection
dB
0.0
Settings
RQT9378~Body_mst.fm 37 ページ 2008年12月24日 水曜日 午前11時23
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMP-BD60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMP-BD60 in the language / languages: English as an attachment in your email.

The manual is 11,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMP-BD60

Panasonic DMP-BD60 User Manual - German - 132 pages

Panasonic DMP-BD60 User Manual - Dutch - 104 pages

Panasonic DMP-BD60 User Manual - Italian - 132 pages

Panasonic DMP-BD60 User Manual - Swedish - 104 pages

Panasonic DMP-BD60 User Manual - Spanish, Spanish - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info