139760
39
Zoom out
Zoom in
Previous page
1/48
Next page
39
RQT9401
Displays Page
TV screen and video
The display is dim. Change “FL Display” in the Setup menu. 30
The elapsed time displayed is
actually less than the play time.
The displayed play time is converted from the number of frames at 29.97 frames (equal to
0.999 seconds) to one second. There will be a slight difference between the time displayed
and the actual elapsed time (e.g., actual one-hour elapsed time may display as
approximately 59 minutes 56 seconds).
The images from this unit do
not appear on the television.
Picture is distorted.
Make sure that the television is connected to the VIDEO OUT terminal, COMPONENT
VIDEO OUT terminals or HDMI AV OUT terminal on this unit.
Make sure that the television’s input setting (e.g., AV 1) is correct.
An incorrect resolution is selected in “Component Resolution”, when the television is connected to
COMPONENT VIDEO OUT
terminals. While stopped, press and hold [
]
and [
1
](PLAY)
on the
main unit at the same time for more than 5 seconds to cancel this setting. Set the item again.
If “24p Output” is set to “On” when the unit is connected to a TV through any terminal other
than HDMI, images may not display properly. In this case, set “24p Output” to “Off”.
The unit and television are using different video systems. While stopped, keep pressing []
and [< OPEN/CLOSE] on the main unit for 5 or more seconds. The system switches from
PAL to
NTSC
or vice versa.
The system used on the disc doesn’t match your television.
PAL discs cannot be correctly viewed on an NTSC television.
This unit can convert NTSC signals to PAL60 for viewing on a PAL television (“NTSC
Contents Output” in the “Picture”).
[DivX] Images may not be output due to how files were created.
8, 9
31
31
29
Played back image is distorted
or does not playback correctly.
([AVCHD])
High definition video (transfer rate of 18 Mbps or faster) cannot be played back correctly if it
was recorded on a DVD compatible to double speed or slower.
Picture stops. [DivX] Picture may stop if the DivX files are greater than 2 GB.
The screen changes
automatically.
When the “Screen Saver Function” in the Setup menu is set to “On”, the display may return to
the screen saver mode automatically if there is no operation for 10 minutes or more.
30
Video is not output.
An image is not output from the COMPONENT VIDEO OUT terminal or the VIDEO OUT
terminal when the “High Clarity Sound” is enabled. Set the “High Clarity Sound” in the
on-screen menu to “Off” to use the COMPONENT VIDEO OUT terminal or the VIDEO OUT
terminal.
27
Video is not output in high
definition.
High definition video cannot be output through the VIDEO OUT terminal.
Confirm that the “HDMI Video Mode”, “HDMI Video Format”, and “Component Resolution” in
the Setup menu are set properly.
The video output resolution is restricted to “576p/480p” when DVD-Video discs, DivX and
BD-Video discs recorded at a rate of 50 field per second are output from the COMPONENT
VIDEO OUT terminals.
31
Status messages do not appear.
Select “Automatic” in “On-Screen Messages” in the Setup menu. 30
The 4:3 aspect ratio picture
expands left and right.
Screen size is wrong.
Use the television to change the aspect. Refer to your television’s operating instructions.
When using a component video cable, set “Progressive” to “Video”. If the situation is not
restored after that, set “TV Aspect” to “4:3 Pan & Scan”.
27, 31
There is a lot of after-image
when playing video.
Turn “3D NR” or “Integrated NR” off if it is on.
27
There is no apparent change in
picture quality when adjusted
with the “Picture” menu in the
on-screen menu.
The effect is less perceivable with some types of video.
The masked-off area is masked
in gray.
If the “Screen Saver Function” in the Setup menu is set to “Off”, the masked-off area is
displayed in black.
30
Still pictures (JPEG) do not
playback normally.
The images that were edited on the PC, such as Progressive JPEG, etc., may not playback.
34
Reference
DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 39 ページ 2009年2月6日 金曜日 午後5時22分
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic dmp bd60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic dmp bd60 in the language / languages: English as an attachment in your email.

The manual is 9,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic dmp bd60

Panasonic dmp bd60 User Manual - German - 132 pages

Panasonic dmp bd60 User Manual - Dutch - 45 pages

Panasonic dmp bd60 User Manual - Dutch - 104 pages

Panasonic dmp bd60 User Manual - French - 44 pages

Panasonic dmp bd60 User Manual - Italian - 132 pages

Panasonic dmp bd60 User Manual - Swedish - 104 pages

Panasonic dmp bd60 User Manual - Spanish, Spanish - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info