456583
28
Zoom out
Zoom in
Previous page
1/44
Next page
28
RQT9245
§
In this unit, a P4HD (> 37) video processor is used to provide video of optimal resolution to the connected TV.
“TV/Device Connection”
TV Aspect
Set to match the type of television connected.
When connected to a 4:3 aspect television:
4:3 Pan & Scan: Video recorded for a widescreen is played as Pan & Scan
(unless prohibited by the producer of the disc). When playing
BD-Video, video is output as “4:3 Letterbox”.
4:3 Letterbox: Video recorded for a widescreen is played in the letterbox style.
When connected to a 16:9 widescreen television:
16:9
: Video recorded for 4:3 aspect screen is displayed as a 4:3
ratio image in the center of the screen.
16:9 full: Video recorded for 4:3 aspect screen is displayed as a
horizontally stretched 16:9 image.
HDMI Connection
Press [OK] to show the following settings.
HDMI Video Mode
Select “On” when video is output from HDMI AV OUT
terminal.
On: Images are output from the HDMI terminal in the resolution set in “HDMI Video
Format”. Video from COMPONENT VIDEO OUT terminal is output as “576i/480i”.
Off Images are output in the resolution set in “Component Resolution”.
HDMI Video Format
§
The items supported by the connected devices are
indicated on the screen as “¢”. When any item without
¢” is selected, the images may be distorted.
Automatic
: Automatically selects the output resolution best suited to the
connected television (1080p, 1080i, 720p or 576p/480p).
576p/480p 720p
1080i 1080p
When the unit is connected to an amplifier/receiver that does not support the
resolution set on the unit, the video cannot be output properly. In this case, use
the HDMI cable to connect the unit to the TV and then connect the unit to the
amplifier/receiver using a cable other than HDMI.
To enjoy high definition video up-converted to 1080p, you need to connect the unit directly
to 1080p compatible HDTV (High Definition Television). If this unit is connected to an
HDTV through other equipment, it must also be 1080p compatible.
24p Output [BD-V] [DVD-V]
When this unit is connected to a TV supporting 1080/24p
output via an HDMI cable, this unit displays each frame at
1/24 second intervals – the same interval originally shot
with the film camera.
When playing DVD-Video, set to “On” and then set “24p
in “Picture” (> 25) to “On
On: Images in 24p are output in 24p as they are.
However,
–when video is being output at 24 frames, images from any other
terminal than the HDMI terminal may not be output properly.
[BD-V]: when images other than 24p are played, images are output at
60p.
Off
HDMI Output Range
Effective when connected to a device that only supports
RGB output.
Standard: The video is output as it is.
Enhanced: When the black and white contrast of a video is low, the signal
is enhanced to reproduce clear video.
HDMI Audio Output
This setting selects whether or not to output audio from
HDMI.
On
:
Off: When the TV is connected to this unit using an HDMI cable, and this unit
is also connected to other devices, such as an amplifier/receiver using an
optical digital audio cable or a coaxial cable ([BD55]).
VIERA Link
Set to use “HDAVI Control” function when connected with
an HDMI cable to a device that supports “HDAVI Control”.
On
:
Off: Select when you do not want to use “HDAVI Control”.
Component Resolution
§
This sets the video output resolution when using the
component video terminal.
576i/480i
576p/480p
720p 1080i
480i, 480p: When playing NTSC discs
576i, 576p: When playing PAL discs
Even if you select “720p” or “1080i”, the video output resolution is restricted to
“576p/480p when DVD-Video discs, DivX and BD-Video discs recorded at a rate
of 50 field per second are output from the COMPONENT VIDEO OUT terminals.
Analog Audio Output [BD55]
When connected with AUDIO OUT terminals, you can set
the unit to output the best possible sound for your speakers.
2ch (Downmix) + 5.1ch
: When connecting to 2ch AUDIO OUT or 5.1ch
AUDIO OUT. (> 29)
7.1ch: When connecting to 7.1ch AUDIO OUT. (> 29)
TV System
Change the setting to match the equipment you are connecting with.
If picture output is not smooth, change the setting.
When NTSC contents are played, they are outputted in the
signal format specified in the “NTSC Contents Output”,
irrespective of the settings here.
NTSC: Select when connecting to a NTSC television.
PA L
: Select when connecting to a PAL or multi-system television.
“Network Settings”
IP Address / DNS Settings (> 12)
Press [OK] to show the following settings.
Connection Test — — —
IP Address Auto-Assignment On
Off
IP Address — — —. — — —. — — —. — — —
Subnet Mask — — —. — — —. — — —. — — —
Gateway Address — —. — — —. — — —. — — —
DNS-IP Auto-Assignment On
Off
Primary DNS — — —. — — —. — — —. — — —
Secondary DNS — — —. — — —. — — —. — — —
Connection Speed Auto-Config On
Off
Connection Speed Setting
This is enabled only when “Connection Speed Auto-Config” is
turned “Off”.
10BASE Half Duplex
10BASE Full Duplex
100BASE Half Duplex 100BASE Full Duplex
Proxy Server Settings (> 13)
Press [OK] to show the following settings.
Initialize Ye s No
Proxy Address (The initial setting is blank.)
Proxy Port Number (The initial setting is “0”.)
DMP-BD55&35EB&EG&EF-RQT9245_eng.book 28 ページ 2008年8月22日 金曜日 午後6時54分
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMP-BD55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMP-BD55 in the language / languages: English as an attachment in your email.

The manual is 6,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMP-BD55

Panasonic DMP-BD55 User Manual - English - 2 pages

Panasonic DMP-BD55 User Manual - English - 48 pages

Panasonic DMP-BD55 User Manual - German - 2 pages

Panasonic DMP-BD55 User Manual - German - 80 pages

Panasonic DMP-BD55 User Manual - Dutch - 2 pages

Panasonic DMP-BD55 User Manual - Dutch - 132 pages

Panasonic DMP-BD55 User Manual - Danish - 2 pages

Panasonic DMP-BD55 User Manual - Danish - 132 pages

Panasonic DMP-BD55 User Manual - French - 40 pages

Panasonic DMP-BD55 User Manual - French, Italian - 2 pages

Panasonic DMP-BD55 User Manual - Italian - 80 pages

Panasonic DMP-BD55 User Manual - Swedish - 2 pages

Panasonic DMP-BD55 User Manual - Swedish - 132 pages

Panasonic DMP-BD55 User Manual - Spanish - 2 pages

Panasonic DMP-BD55 User Manual - Spanish - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info