456583
39
Zoom out
Zoom in
Previous page
1/48
Next page
RQT9243 or RQT9350
39
TV screen and video Page
Sound
The images from this unit
do not appear on the
television.
Picture is distorted.
Jittering occurs.
Make sure that the television is connected to either the VIDEO OUT terminal,
COMPONENT VIDEO OUT terminals or HDMI AV OUT terminal on this unit.
Make sure that the television’s input setting (e.g., VIDEO 1) is correct.
An incorrect resolution is selected in “Component Video Resolution”, when the
television is connected to COMPONENT VIDEO OUT terminals. While stopped,
press and hold [] and [1] (PLAY) on the main unit at the same time for more
than 5 seconds to cancel this setting. Set the item again.
If “24p Output” is set to “On” when the unit is connected to a TV through any
terminal other than HDMI, images may not display properly. In this case, set “24p
Output” to “Off”.
When “24p Output” is set to “On”, HDMI authentication takes place where 24p
images switch to other images, and a black screen is displayed.
When “24p Output” is set to “On”, jittering may occur while playing DVD-Video
other than 24p images. In this case, turn “24p Output” to “Off”.
[DivX]: Images may not be output due to how files were created.
Press [] and [1] (PLAY) simultaneously on the unit for more than 5 seconds to
shift to more compatible mode with HDMI equipment. However, Dolby Digital
Plus, Dolby TrueHD, and DTS-HD audio are not output in bitstream. To output the
bitstream, select “Restore Default Settings” to restore the factory presets and
make proper settings.
Picture may not be seen when more than 4 devices are connected with HDMI
cables. Reduce the number of connected devices.
11
32
32
32
32
33
The screen changes
automatically.
When the “Screen Saver Function” in the Setup menu is set to “On”, the display
may return to the screen saver mode automatically if there is no operation for
10 minutes or more.
32
Video is not output in high
definition.
High definition video cannot be output through the VIDEO OUT terminals.
Confirm that the “HDMI Video Mode”, “HDMI Resolution”, and “Component Video
Resolution” in the Setup menu are set properly.
32
The 4:3 aspect ratio picture
expands left and right.
Screen size is wrong.
Use the television to change the aspect. Refer to your televisions operating
instructions.
When using a component video cable, set “Progressive” to “Video”. If the situation
is not restored after that, set “TV Aspect” to “4:3 Pan & Scan”.
When using an HDMI cable, change “TV Aspect” type to “16:9”.
29, 32
32
There is a lot of after-image
when playing video.
Turn “3D NR” or “Integrated NR” off if it is on. 29
When playing DVD-Video
using progressive output,
one part of the picture
momentarily appears to be
doubled up.
When you use the HDMI AV OUT terminal for video output, follow the steps below
for setting.
1 Connect this unit to the TV with any cable except the HDMI cable.
2 When you connect with the Component Video cable, set “HDMI Video Mode” to
“Off” and “Component Video Resolution” to “480i” in the Setup menu.
32
Still pictures (JPEG) do not
playback normally.
The images that were edited on the PC, such as Progressive JPEG, etc., may not
playback.
35
No sound.
Low volume.
Distorted sound.
Cannot hear the desired
audio type.
Check the connections and the “Digital Audio Output” settings. Check the input
mode on the amplifier/receiver if you have connected one.
Press [AUDIO] to select the audio.
[BD55]: When the unit is connected to an amplifier/receiver with the AUDIO OUT
terminal, set “Analog Audio Output” and match multi channel speaker settings. If
these are not set properly, the audio is not output correctly.
[BD55]: When connected to an amplifier/receiver or any other devices using both
AUDIO OUT terminal and HDMI AV OUT terminal, the audio from AUDIO OUT
terminal may not be output with the desired audio depending on the specifications
of the connected devices, etc. Set “HDMI Audio Output” to “Off”, when you output
multi-channel surround sound from AUDIO OUT terminal.
The sound effects (Re-master, V. Surround, etc.) will not work when the bitstream
signal is output from the HDMI AV OUT terminal or the DIGITAL AUDIO OUT
terminal.
[DivX]: Audio may not be output depending on how files were created.
Audio may not be heard when more than 4 devices are connected with HDMI
cables. Reduce the number of connected devices.
To output audio from a device connected with an HDMI cable, set “HDMI Audio
Output” to “On” in the Setup menu.
1113, 31
20
32, 34
32
32
Cannot switch audio. There are discs for which audio cannot be changed because of how the disc was
created.
When connecting an amplifier/receiver using a coaxial cable (
[BD55]), optical
digital audio cable or an HDMI cable, you cannot switch the audio if “Dolby D/
Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is set to “Bitstream”. Set “Dolby D/
Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “PCM” or connect using AUDIO
OUT terminal.
12, 13, 31
Reference
DMP-BD55_35PP-RQT9243_ENG.book 39 ページ 2008年8月29日 金曜日 午前10時28
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMP-BD55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMP-BD55 in the language / languages: English as an attachment in your email.

The manual is 9,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMP-BD55

Panasonic DMP-BD55 User Manual - English - 44 pages

Panasonic DMP-BD55 User Manual - English, German - 2 pages

Panasonic DMP-BD55 User Manual - German - 80 pages

Panasonic DMP-BD55 User Manual - Dutch - 2 pages

Panasonic DMP-BD55 User Manual - Dutch - 132 pages

Panasonic DMP-BD55 User Manual - Danish - 2 pages

Panasonic DMP-BD55 User Manual - Danish - 132 pages

Panasonic DMP-BD55 User Manual - French - 40 pages

Panasonic DMP-BD55 User Manual - French, Italian - 2 pages

Panasonic DMP-BD55 User Manual - Italian - 80 pages

Panasonic DMP-BD55 User Manual - Swedish - 2 pages

Panasonic DMP-BD55 User Manual - Swedish - 132 pages

Panasonic DMP-BD55 User Manual - Spanish - 2 pages

Panasonic DMP-BD55 User Manual - Spanish - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info