139465
33
Zoom out
Zoom in
Previous page
1/48
Next page
33
RQT9401
When connecting to an amplifier/receiver to enjoy multi-channel surround sound, use the following settings on this unit if they cannot be set on
the amplifier/receiver.
The settings are effective when connecting to analog 7.1ch AUDIO OUT/5.1ch AUDIO OUT terminal.
Preparation
1 Set “Analog Audio Output” to “7.1ch” or “2ch (Downmix) + 5.1ch”.
( 31)
A message is displayed.
2 Press [OK].
§
Surround back channel is enabled only when setting “Analog
Audio Output” to “7.1ch”.
Speaker presence and size ( )
Set all the connected speakers individually.
1
Press [
3
, 4, 2, 1]
to select the speaker icon and press
[OK]
.
2
Press [
3
, 4]
to select the setting and press
[OK]
.
Icon examples:
Surround speaker (LS)
Large: Select when
the speaker
supports
low-frequency (under 100 Hz) reproduction.
Small: Select when the speaker does not support
low-frequency reproduction.
In order to make an ideal listening environment, settings of speaker
sizes may be automatically adjusted.
For example, if the subwoofer is set to “No”, the front speakers will
automatically be set to “Large”. (In this case, we recommend
connecting a speaker that can reproduce bass below 100 Hz.)
Delay time ( )
For optimum listening with 7.1/5.1-channel sound, all the speakers,
except for the subwoofer, should be the same distance from the
seating position.
If you have to place the center, surround and surround back
speakers closer to the seating position, adjust the delay time to
make up for the difference.
If either distance A or C is less than B ( below) find the
difference in the relevant table and change to the recommended
setting.
1 Press [3, 4, 2, 1] to select the delay time box ( ) and
press [OK].
2 Press [3, 4] to select the setting and press [OK].
Channel balance ( )
1 Select “Test” and press [OK].
A test signal is output.
Front (L)_—)Center (C)_—)Front (R)_—)Surround (RS)
:;
Surround (LS)(— Surround Back (LB) (— Surround Back (RB)
2 While listening to the test signal, press [3, 4] to adjust the
volume of each speaker
Front speakers: 0.0 to s6.0 dB
Center speaker, Surround/Surround Back speakers:
0.0 to s12.0 dB
3 Press [OK].
The test signal stops.
No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to suit your taste.
To finish the speaker setting
Press [3, 4, 2, 1] to select “Complete” and press [OK].
Changing the speaker setting to suit your speakers [BD80]
ms
ms
L
Complete
Test
LS
R
SW
RS
dB
dB
dB
dB
dBdB
LB RB
0.00.0
0.0
0.0
0.0
0.0 0.00.0
ms
dBdB
0.0 0.00.0
C
Subwoofer
(SW)
Front (R)
Center (C)
Front (L)
Complete
(LS)
Surround
(RS)
Surround back
Test
(RB)
§
(LB)
L
LS
R
SW
RS
LB RB
C
LS
LS
NoLarge Small
A Center speaker C Surround/Surround back
speakers
Difference Setting
Approx. 34 cm
1.0 ms Difference Setting
Approx. 170 cm
5.0 ms
Approx. 68 cm
2.0 ms
Approx. 102 cm
3.0 ms
Approx. 340 cm
10.0 ms
Approx. 136 cm
4.0 ms
Approx. 510 cm
15.0 ms
Approx. 170 cm
5.0 ms
ms
0.0
ms
0.0
B
CA
L
LS
R
SW
C
RS
C
RS
LS
A
B
C
L
LB
R
RS
SW
C
RB
C
RB
RSLS
LB
A
B
C
C
LS
Approximate room dimensions
Circle of constant primary listening distance
: Actual
speaker
position
: Ideal
speaker
position
: Primary
listening
distance
5.1ch speaker
connection
7.1ch speaker connection
dB
0.0
Settings
DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 33 ページ 2009年2月6日 金曜日 午後5時22分
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic dmp bd 80 eg k at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic dmp bd 80 eg k in the language / languages: English as an attachment in your email.

The manual is 9,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic dmp bd 80 eg k

Panasonic dmp bd 80 eg k User Manual - German, Italian, Spanish, Spanish - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info