139465
20
Zoom out
Zoom in
Previous page
1/48
Next page
20
RQT9401
Enjoying High Bit rate Audio and Video
This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in
BD-Video.
To enjoy above high bit rate audio, the following conditions are necessary. (Part shown in the shaded area of table given below)
NECESSARY CONNECTIONS
HDMI AV OUT terminal: ( 9)
7.1ch AUDIO OUT terminal [BD80]: ( 9)/ 5.1ch AUDIO OUT terminal [BD80]: ( 10)
NECESSARY SETTINGS
Set “BD-Video Secondary Audio” to “Off”. ( 30)
HDMI AV OUT terminal: Set “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “Bitstream” or “PCM”. ( 30)
7.1ch AUDIO OUT terminal [BD80]: Set “Analog Audio Output” to “7.1ch”. ( 31)
5.1ch AUDIO OUT terminal [BD80]: Set “Analog Audio Output” to “2ch (Downmix) + 5.1ch”. ( 31)
Connect an amplifier/receiver ( 9, 10) and confirm the desired audio type and necessary settings (“BD-Video Secondary Audio”, “Dolby D/Dolby
D +/Dolby TrueHD” or “DTS/DTS-HD”).
The number of channels listed is the maximum possible number of output channels.
Also, depending on the specifications or the settings of the amplifier/receiver, the results of the output may vary.
*1 When the connected equipment is not supported with these audio format, the audio is output as Dolby Digital bitstream, DTS Digital Surround
bitstream or down-mixed 2ch PCM (e.g., TV).
*2 [BD-V]: When playing BD-Video without secondary audio or clicking sound, the audio is output as the same format as if “BD-Video Secondary
Audio” was set to “Off”.
*3 When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.
*4 [BD-V]: When the connected equipment is supported with 7.1 channel surround, the audio output is amplified from 5.1ch or 6.1ch to 7.1ch
depending on the DTS, Inc. specifications.
*5 With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audio
decoded as DTS Digital Surround, and DTS-ES recorded to BD-Video becomes PCM audio decoded as DTS-ES.
*6 [BD-V]: When “BD-Video Secondary Audio” is set to “On”, Dolby Digital EX is output as Dolby Digital and DTS-ES is output as DTS Digital
Surround, however if playing BD-Video without secondary audio or clicking sound, the audio is output as the original format.
NECESSARY SETTINGS
HDMI AV OUT/DIGITAL AUDIO OUT terminal: “Digital Audio Output” ( 30)
[BD80] 7.1ch AUDIO OUT/5.1ch AUDIO OUT terminal: “Digital Audio Output” and “Analog Audio Output” ( 30, 31)
[Note]
When setting “BD-Video Secondary Audio” to “Off”, the clicking sound on the menu and audio with secondary video in picture-in-picture mode
( 19) cannot be output.
Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in
60 frames/second in accordance with the display format.
These can be output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.
NECESSARY CONNECTIONS
Connect to a TV supporting 1080/24p input via an HDMI cable.
NECESSARY SETTINGS
“24p Output”: “On” ( 31)
Enjoying High Bit rate Audio with 7.1ch speaker and 5.1ch speaker
About audio from audio output terminal
Terminal HDMI AV OUT DIGITAL AUDIO OUT 7.1ch AUDIO OUT [BD80]
5.1ch
AUDIO OUT
[BD80]
“Dolby D/Dolby D +/
Dolby TrueHD”/
“DTS/DTS-HD”
“Bitstream”*
1
“PCM”*
3
“Bitstream” “PCM”
“BD-Video
Secondary Audio”
“On”*
2
“Off” “On” “Off” “On”/“Off” “On”/“Off” “On” “Off” “On”/“Off”
Dolby Digital/
Dolby Digital EX*
5
Dolby Digital
/
Dolby Digital
EX*
6
Dolby
Digital/
Dolby Digital
EX
5.1ch PCM
Dolby Digital
/
Dolby Digital
EX*
6
Down-mixed
2ch PCM
5.1ch
5.1ch
Dolby Digital Plus
Dolby Digital
Dolby Digital
Plus
5.1ch
PCM*
2
7.1ch PCM Dolby Digital
5.1ch*
2
7.1ch
Dolby TrueHD
Dolby
TrueHD
DTS Digital
Surround/
DTS-ES*
5
DTS Digital
Surround/
DTS-ES*
6
DTS Digital
Surround/
DTS-ES
[DVD-V]: 5.1ch PCM DTS Digital
Surround/
DTS-ES*
6
[DVD-V]: 5.1ch
[BD-V]: 7.1ch PCM*
4
[BD-V]: 7.1ch*
4
DTS-HD High
Resolution Audio
DTS Digital
Surround
DTS-HD
High
Resolution
Audio
7.1ch PCM*
4
DTS Digital
Surround
7.1ch*
4
DTS-HD Master
Audio
DTS-HD
Master
Audio
7.1ch LPCM
Down-mixed
5.1ch PCM
7.1ch PCM
Down-mixed
5.1ch
PCM*
2
7.1ch PCM
Down-mixed
2ch PCM
Down-mixed
5.1ch*
2
7.1ch
Regarding 24p output
DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 20 ページ 2009年2月6日 金曜日 午後5時22分
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic dmp bd 80 eg k at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic dmp bd 80 eg k in the language / languages: English as an attachment in your email.

The manual is 9,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic dmp bd 80 eg k

Panasonic dmp bd 80 eg k User Manual - German, Italian, Spanish, Spanish - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info