588938

Panasonic DMC-ZS40 Manual

310
Zoom out
Zoom in
Previous page
1/329
Next page
Others
Q&A Troubleshooting
VQT5E74
- 310 -
About the Wi-Fi function
It cannot connect to the wireless LAN. Radio waves get disconnected.
●
Use within the communication range of the wireless LAN network.
●
Connection types and security setting methods are different depending on the wireless access point.
→ Refer to the operating instructions of the wireless access point.
●
When the radio waves are interrupted, the condition may improve by moving the location or
changing the angle of the wireless access point.
●
It may not automatically connect when the network SSID of the wireless access point is set not to
broadcast.
→ Set the network SSID of the wireless access point to broadcast.
●
Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency operated
nearby?
→ Radio waves may get interrupted when used simultaneously. Use them sufficiently away from the
device.
●
Is the 5 GHz/2.4 GHz switchable wireless access point connected to other equipment using the
5 GHz band?
→ The use of a wireless access point that can use 5 GHz/2.4 GHz simultaneously is recommended.
It cannot be used simultaneously with this camera if it is not compatible.
●
When the battery indicator is flashing red, the connection with other equipment may not start or the
connection may be disrupted. (A message such as [Communication error] is displayed.)
Wireless access point is not displayed. Or it cannot be connected.
●
Check if the wireless access point to connect is in operating state.
●
The camera may not display or connect to a wireless access point depending on the radio wave
condition.
→ Perform the connection closer to the wireless access point.
●
It may not display even if the radio waves exist depending on the setting of the wireless access
point.
→ Check the settings of the wireless access point.
●
The wireless access point may not be found depending on the radio wave condition.
→ Perform the [From List]. (→247)
●
Is the network SSID of the wireless access point set not to broadcast?
→ It may not be detected when it is set not to broadcast. Enter and set the network SSID. (→248)
●
Try the following:
→ Move this unit closer to the wireless access point
→ Remove the obstacles between this unit and the wireless access point
→ Change the direction of this unit
It takes long time every time to connect to a smartphone.
●
It may take longer time to connect depending on the Wi-Fi connection setting of the smartphone, but
it is not a malfunction.
This unit is not displayed in the Wi-Fi setting screen of the smartphone. It takes time to
setup the connection.
●
Try switching the ON/OFF of the Wi-Fi function in the Wi-Fi settings of the smartphone.
I have forgotten the login ID or password for the “LUMIX CLUB”.
●
Check the information in the login screen of “LUMIX CLUB”.
http://lumixclub.panasonic.net/eng/c/
I do not have a wireless access point at my home, but I would like to perform service
user registration of the “LUMIX CLUB”.
●
Service user registration for the “LUMIX CLUB” is not possible in the environment without a wireless
access point.
… 310 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMC-ZS40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMC-ZS40 in the language / languages: English as an attachment in your email.

The manual is 8,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMC-ZS40

Panasonic DMC-ZS40 User Manual - English - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info