99980
17
Zoom out
Zoom in
Previous page
1/144
Next page
16 VQT1Z82 VQT1Z82 17
Inserting battery and card
(Continued)
Setting the clock
( The clock is not set when the
camera is shipped.)
Set REC/PLAY switch to before turning on power.
Turn on the power
‘PLEASE SET THE CLOCK’ will be displayed
when power is turned on for the first time.
While this message is displayed
Press MENU/SET
Select the setting item (year,
month, date, time, display order,
time display format), and set.
Select the
setting
item
Select the display format
Set the
date,
time, or
display.
To cancel Press
.
Setting example of display order and time display format
[M/D/Y] [24HRS]: 12:34 APR.15.2009
[D/M/Y] [AM/PM]: PM 12:34 15.APR.2009
[Y/M/D] [24HRS]: 2009.4.15 12:34
When set to [AM/PM], 0:00 midnight is AM 12:00,
and 0:00 noon is PM 12:00.
Set
Press MENU/SET
Turn on power again and check time display.
(Time and date can be displayed by pressing
‘DISPLAY’ several times.)
REC/PLAY switch
Failure to set the date and time will cause the date/time to be improperly printed when printing
pictures in digital photo center or when using ‘TEXT STAMP’ (P.90).
Year can be set between 2000 and 2099.
After the time has been set, the date can be printed correctly even if the date is not displayed on the
camera screen.
To set local time at travel
destination
‘WORLD TIME’ (P.68)
Remaining battery and memory capacity
Pictures remaining ( P.124 P.126)
Displayed when no card inserted (pictures will be saved to built-in memory)
Remaining battery (only when using battery)
(flashes red)
If the battery mark flashes red (or status indicator flashed when LCD
monitor is off), recharge or replace battery. (P.13)
When in operation
(Card) or (Built-in memory) are illuminated red.
This means that an operation is in progress, such as the recording, reading, deleting,
or formatting of pictures. Do not turn off the power or remove the battery, card, or AC
adaptor (DMW-AC5PP, sold separately) (this may cause damage to or loss of data).
Do not subject the camera to vibrations, impact, or static electricity. Should any of these
cause camera operation to be terminated, attempt to perform the operation again.
It is recommended that you copy important pictures to your computer (as
electromagnetic waves, static electricity, or faults may cause data to be damaged).
For model numbers and types,
see http://panasonic.co.jp/pavc/global/cs (This Site is English only.)
Picture save destination (cards and built-in memory)
Pictures will be saved to a card if one is inserted, or to the built-in memory if not.
Compatible memory cards (sold separately)
The following SD standard-based cards (Panasonic brand recommended)
SD memory cards (8 MB - 2 GB)
SDHC memory cards (4 GB - 32 GB)
Can only be used with devices compatible with SDHC
memory cards. (Always read your device’s operating
instructions before proceeding)
Cards of over 4 GB may only be used if they have the SDHC logo.
Please reformat the card with this camera if it has already
been formatted with a computer or another device. (P.26)
If the switch on the card is set to ‘LOCK’, operations such as
formatting, recording, and deleting cannot be performed.
MultiMediaCards may also be used (for pictures only)
Built-in memory (approx. 40 MB)
Built-in memory is slower than SD memory card.
‘QVGA in ‘REC QUALITY’ (P.80) only can be available to record motion pictures in the built-in memory.
Clipboard pictures (P.81) are saved to built-in memory.
Pictures may be copied between cards and the built-in memory (P.98).
To change time setting
Select ‘CLOCK SET’ from
SETUP menu (P.21), perform
and .
Clock settings will be saved for
approx. 3 months even after
battery is removed, provided
a fully-charged battery was
installed in camera for the 24
hours beforehand.
Switch
(LOCK)
32
3232
SD memory card/
SDHC memory card
(sold separately)
SDHC logo
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMC-ZS3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMC-ZS3 in the language / languages: English as an attachment in your email.

The manual is 8,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info