679490

Panasonic DMC-TZ8 Manual

44
Zoom out
Zoom in
Previous page
1/90
Next page
86 VQT2R24 VQT2R24 87
Recording the place of recording with GPS
(continued)
Recording Mode:
∗
∗
Record only (Cannot set)
Change the recorded place name information
If positioning results and current position are different from each other, or if there are
other candidate locations, you can change the information to nearby place names or
landmarks.
Displayed when other location name information can be
selected.
Select [GPS AREA SELECT]
(→20), from the [TRAVEL
MODE] menu
Select the item to change
display
From the displayed
candidates, select the
desired place name or
landmark to be recorded
Return to the menu screen
■
When [GPS SETTING] is set to [ON] or
In Recording Mode, an icon that indicates the positioning status is displayed on the
LCD monitor.
Then, if positioning is successful, the location name information is displayed.
Location name
information
Positioning
(5 minutes
maximum)
Icon Status
Location name information exists (information
from the last 5 minutes).
Location name information exists (information
from 5 minutes to 1 hour ago).
Location name information exists (information
from 1 hour to 2 hours ago).
Location name information exists (information
from more than 2 hours ago).
Positioning failed (no location name information).
●
When using the camera for the first time or after not using it for a while,
positioning may take several minutes, because it may take some time to
acquire the orbit information from the GPS satellites.
●
If positioning is successful, the current position is saved.
However, note that the saved position information is deleted in the following cases:
• When [GPS SETTING] is set to [OFF]
• When [GPS SETTING] is set to
and then the camera’s power is turned off
• When the setup settings are reset with [RESET]
●
In the following cases, the location name information that will be recorded on the
picture may vary significantly from the current position. Check the location name and
other information before recording.
• Immediately after turning on the camera’s power • When the icon is something other than
●
Positioning is not performed in the following situations:
• During motion picture recording • During audio recording
■
Information recorded on recorded pictures
When positioning is successful, the current position is saved in the camera and the
latitude, longitude and location name information are recorded on the recorded still
pictures and motion pictures recorded in [AVCHD Lite(GPS REC)] or [MOTION JPEG].
●
Information recorded on recorded pictures
• Latitude/longitude
• Location name information (country or region name/prefecture, state or province name/city or
town name/landmark name)
∗
∗
You can use the camera or the ‘PHOTOfunSTUDIO’ software on the supplied CD-ROM to check
the recording location of pictures or display them by location of recording.
[GPS SETTING] is not available in the DMC-TZ9/DMC-TZ8.
●
The location name information consists of location names and landmarks that are
found via a search of the camera’s database based on the latitude and longitude that
were acquired in positioning, and the most appropriate items are displayed in the
following order of priority. (Sometimes the nearest items are not displayed.)
Landmark names and the corresponding location names within 1 km of the current position
Location names for places with landmarks or other points of interest within 10 km of the current
position
• If there are no location names or landmarks that comply with the conditions above, “---” is
displayed. Even when “---” is displayed, in some cases location name information can be
selected in [GPS AREA SELECT].
• In some cases, the landmark that you are looking for may not have been registered. Landmarks
and other location name information are current as of February 2010. (Landmark types →173)
●
The location name information (location name or landmark name) may be different
from the official name.
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMC-TZ8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMC-TZ8 in the language / languages: English as an attachment in your email.

The manual is 9,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info