66183
30
Zoom out
Zoom in
Previous page
1/47
Next page
30 VQT1R37 VQT1R37 31
Applications
4
Adding or changing access
points
Public LAN access points may be added, but please note that successful internet
connection with this camera via non-T-Mobile services cannot be guaranteed.
When using a wireless LAN router, please use one that is compliant with either the IEEE
802.11g or the IEEE 802.11b standard.
First, register your access point, then select it from the list to connect.
For information security reasons, we strongly recommend making encryption settings on your router
when using a home wireless LAN. Fixed IP address settings cannot be made on the camera itself.
Registering access point
You can register up to eight access points, including the ‘tmobile’ which comes preset.
Depending on the setting of the access point used, the screen requiring no settings may
not be displayed.
Check with your provider or network administrator if you do not know the ‘SSID’ (network
name), ‘network certification’ or ‘encryption key.’
1
Entering Wi-Fi mode (P.10)
2
Select ‘Wi-Fi SET’
3
Select ‘ACCESS POINT SET’
To return:
Press [Q.MENU/ ]
4
Select ‘OTHER ACCESS POINT’
To return:
Press [Q.MENU/ ]
5
Selecting an access point
Unregistered
Registered
( PUBLIC
Wi-Fi LAN)
( HOME
Wi-Fi LAN)
Signal strength (P.15)
To return: Press
To scan again:
Press [DISPLAY]
To change page:
Turn zoom lever
If the access point to be registered
on the list is not displayed, select
MANUAL INPUT.’
The signal strength display reflects
the strength status when the access
point was detected: as such, it may
not reflect the current strength. To
check the current signal strength,
press [DISPLAY], and search the
access point again.
6
Select access point type
To return: Press [Q.MENU/ ]
7
If the displayed SSID (network name) is correct
Press
When ‘MANUAL INPUT’ has been selected,
press [MENU/SET], input SSID (up to 32 single-
byte alphanumerics), and select ‘EXIT’ and
confirm. (Character input P.11) Press to
proceed to step
8
.
To return: Press
Go to step
10
if selecting a unregistered access point.
8
Select network certificate type
(Only displayed when ‘MANUAL INPUT’ or registered access point selected)
To return: Press [Q.MENU/ ]
Network certification : Certification system for wireless LAN access
points
Encryption scheme : This is the system for encrypting the data. The
system which can be set will depend on the
network certification setting.
Network certificate Available encryption scheme
OPEN WITHOUT ENCRYPTION, or WEP
SHARED KEY WEP
WPA-PSK AES / TKIP
WPA2-PSK AES / TKIP
When using a ‘PUBLIC Wi-Fi LAN’, select the settings supplied by the
provider you are using for the ‘network certification,’ ‘encryption scheme’
and ‘encryption key’ settings; when using of a ‘HOME Wi-Fi LAN’, select
the same settings as the wireless LAN router settings.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMC-TZ50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMC-TZ50 in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info