61596
109
Zoom out
Zoom in
Previous page
1/144
Next page
Connecting to other equipment
109
VQT0Y44
• Do not use any other USB connection
cables except the supplied one.
• While [ACCESS] is being displayed, do
not disconnect the USB connection cable.
• Data transmission takes time when a card
contains a large number of pictures.
• If the remaining battery power is
exhausted during communication, the
recorded data may be damaged. When
you connect the camera to the PC, use a
battery with sufficient battery power (P14)
or the AC adaptor (DMW-AC5; optional).
• If the remaining battery power becomes
low while the camera and the PC are
communicating, the status indicator blinks
and the alarm beeps. In this case, stop
the communication at once on the PC.
• When connecting the camera to a
Windows 2000 OS PC with the USB
connection cable, do not replace the
card while the camera and the PC are
connected. The information on the
card may be damaged. Disconnect the
USB connection cable before replacing
the card.
• Pictures edited or rotated with a PC may
be displayed in black in playback mode
(P36), multi playback (P77) and calendar
playback (P78).
• For information about this, refer to the
separate operating instructions for PC
connection.
• Refer to the operating instructions of the
PC, too.
• If a card is not inserted when the camera
is connected to the PC, you can edit or
access the picture data on the built-in
memory. If a card is inserted, you can edit
or access the picture data on it.
• You cannot switch between the built-in
memory and the card while the camera is
connected to the PC. When you want to
switch between the built-in memory and
the card, disconnect the USB connection
cable, insert (or remove) the card and
then connect the USB connection cable to
the PC again.
• When you change the mode dial to print
mode [ ] with the camera connected to
the PC, [PLEASE RE-CONNECT THE
PRINTER.] appears on the camera’s LCD
monitor. Before reconnecting the camera
to a printer, change the mode from [ ]
to another one and make sure that data
transmission is not in progress.
([ACCESS] appears on the camera’s LCD
monitor while data transmission is in
progress.)
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMC-LX2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMC-LX2 in the language / languages: English as an attachment in your email.

The manual is 6,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMC-LX2

Panasonic DMC-LX2 User Manual - German - 136 pages

Panasonic DMC-LX2 User Manual - Dutch - 136 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info