61596
46
Zoom out
Zoom in
Previous page
1/144
Next page
Advanced
46
VQT0Y44
n Adjusting flash output
Adjust the flash output when the subject is
small or reflection ratio is extremely high or
low.
1
Press e [C] several times until
[ FLASH] appears and then
press w/q to set the flash output.
• You can adjust from [-2 EV] to [+2 EV]
in steps of [1/3 EV].
• Select [0 EV] to return to the original
flash output.
2
Press [MENU/SET] to finish.
You can also press the shutter
button halfway to finish.
• When the flash output is adjusted, the
flash output value appears on the upper
left of the screen.
• The flash output setting is memorized
even if the camera is turned off.
• In Auto mode [0], motion picture
mode [i], and [SCENERY] (P63),
[NIGHT SCENERY] (P64),
[FIREWORKS] (P66), [STARRY SKY]
(P67), [AERIAL PHOTO] (P68) or
[HIGH SENS.] (P68) in scene mode,
you cannot adjust the flash output.
• Do not look directly at the flash at
close range when it is activated.
• Do not bring the flash too close to
objects or close the flash while it is
activated. The objects may be
discolored by its heat or lighting.
• Do not cover the photo flash with your
fingers or any other items.
In economy mode, the LCD monitor
turns off and the status indicator blinks
while the flash is charged. [This does
not happen when using the AC adaptor
(DMW-AC5; optional).]
If the remaining battery power is low,
the length of time that the LCD monitor
turns off to charge may become longer.
The flash icon turns red when activating the
flash and pressing the shutter button halfway.
• When the jitter alert appears, we
recommend using a tripod.
• When you take a picture beyond the
available flash range, the exposure may
not be adjusted properly and the picture
may become bright or dark.
When taking a picture with the flash, the white
balance will be automatically adjusted [except
for [
x
] (Daylight), [ ] (Flash)], but the
white balance may not be properly adjusted if
the photo flash is insufficient. (P82)
• When the shutter speed is fast, the flash
effect may not be sufficient.
• When you repeat taking a picture,
recording may be disabled even if the
flash is activated. Take a picture after the
access indication disappears.
When the flash is being charged, the flash icon
blinks red, and you cannot take a picture even
when you press the shutter button fully.
Do not close the flash immediately after
using a secondary light source, for example
AUTO/Red-eye reduction [
s
]. Doing
so can damage the camera.
The red-eye reduction effect differs between
people. Also, if the subject was far away
from the camera or was not looking at the
first flash, the effect may not be evident.
• When you set burst mode or auto bracket,
only 1 picture is recorded for every flash
activated.
• You can extend the shutter speed by up to
1/8 by using exposure compensation.
Sand or seawater may cause the camera to
malfunction. Make sure that sand or seawater
does not come in touch with the flash.
MENU
FLASH
SELECT EXIT
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMC-LX2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMC-LX2 in the language / languages: English as an attachment in your email.

The manual is 6,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMC-LX2

Panasonic DMC-LX2 User Manual - German - 136 pages

Panasonic DMC-LX2 User Manual - Dutch - 136 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info